Download Driver Cutting Plotter Jinka 1351 Link Info

Send a simple 50mm x 50mm square to the plotter. If the size matches and there are no communication errors, the driver is working perfectly.

Since these drivers are hosted on third-party sites and are legacy files, it is recommended to scan all downloaded archives with an updated antivirus program before installation.

Conclusion: The driver for the Jinka 1351 is best obtained via the SignTools link provided in Section 3A or through the installation discs of ArtCut/Flexi software. If the proprietary driver fails, installing the generic FTDI USB-to-Serial driver is a proven workaround to establish communication with the plotter.

Title: A Comprehensive Guide to Downloading and Installing Drivers for the Jinka 1351 Cutting Plotter

Introduction

The Jinka 1351 cutting plotter is a versatile and widely used machine in various industries, including graphic design, signage, and craft making. To ensure optimal performance and seamless communication between the plotter and computer, it is essential to install the correct drivers. This paper provides a step-by-step guide on how to download and install drivers for the Jinka 1351 cutting plotter, along with troubleshooting tips and precautions to consider.

Understanding the Importance of Drivers

Drivers are software components that enable communication between the operating system and hardware devices, such as the Jinka 1351 cutting plotter. They translate commands from the computer into a language that the plotter can understand, allowing for precise cutting and efficient operation.

Downloading Drivers for Jinka 1351 Cutting Plotter

To download the correct drivers for your Jinka 1351 cutting plotter, follow these steps:

Installing Drivers for Jinka 1351 Cutting Plotter

Once you have downloaded the driver, follow these steps to install it:

Verifying Driver Installation

To verify that the driver has been successfully installed:

Troubleshooting Tips

If you encounter issues during driver installation or plotter operation:

Precautions and Best Practices

To ensure optimal performance and longevity of your Jinka 1351 cutting plotter:

Conclusion

Downloading and installing the correct drivers for the Jinka 1351 cutting plotter is essential for optimal performance and efficient operation. By following the steps outlined in this guide and taking necessary precautions, users can ensure seamless communication between the plotter and computer, minimizing potential issues and maximizing productivity.

Recommendations

By adhering to these guidelines, users can unlock the full potential of their Jinka 1351 cutting plotter and achieve high-quality results. download driver cutting plotter jinka 1351 link

**Link to download driver:

As this is a sample document I do not provide any direct link however you can get the software from official website of Jinka.

Hope this sample document will assist you.

To successfully set up your Jinka 1351 cutting plotter , you need two types of software: a communication driver (often the

USB-to-serial driver) and a cutting controller plugin or software like 1. Download Links for Jinka 1351 Drivers

Because "Jinka" models are distributed by various regional partners, the most reliable download links are often hosted on manufacturer or distributor support pages: Official Jinka Indonesia Repository

: This is a primary source for JK series drivers and manual files. Link Driver Jinka JK/XL Series (Only Cut) Link Driver Jinka Pro Series USB Communication Driver

: Most Jinka plotters use a CH341 chip for USB connection. If your computer doesn't recognize the device, download the CH341SER USB Driver Plugin & Software Alternatives PlotCalc for CorelDRAW

: A common plugin for Jinka XE-1351 models to enable direct cutting from design software. SignTools 4 : Dedicated setup for the Jinka JK1351 2. Step-by-Step Installation Guide

Installing the driver correctly is critical for the plotter to appear as a valid "COM Port" in your software. Extract and Run Setup

: Download the driver package and extract it (using WinRAR or 7-Zip). Locate and double-click Connect the Plotter

: Plug the USB cable from the plotter into your computer and turn the machine on. Verify in Device Manager Right-click "This PC" and select Device Manager Look under Ports (COM & LPT)

. You should see a new entry, often labeled "USB-SERIAL CH340 (COMX)". Configure Cutting Software Open your software (e.g., Artcut or CorelDRAW). Cutter Setup Plotter Setup as the manufacturer and ) as the model

Set the output port to match the COM port number found in Device Manager. 3. Troubleshooting Tips Software for JinKa XE-1351 plotter - PlotCalc

How to Download and Install Jinka 1351 Cutting Plotter Drivers 

If you are looking to get your Jinka 1351 Cutting Plotter up and running, having the correct driver is essential for your computer to communicate with the device and control its functions.  Official Download Links 

Depending on your specific model, you can find the necessary drivers and software through these verified sources: 

Jinka Indonesia (Official Support): This is the primary source for various model-specific drivers, including the standard JK/XL Only Cut series and the XL Pro series.

Jinka Tech Support: For Windows 10 (x64) users, you can find the Jinka 1351 Driver v2.4 which is critical for preventing jagged cuts or stuttering curves.

PlotCalc Plug-in: If you use CorelDRAW, you may need the PlotCalc software for JinKa XE-1351 to bridge your design software and the plotter.  Quick Installation Guide 

Preparation: Unplug all other USB devices (scanners, other plotters) to avoid COM port conflicts. Send a simple 50mm x 50mm square to the plotter

Download & Extract: Use a tool like WinRAR or 7-Zip to extract the downloaded ZIP folder.

Run as Administrator: Right-click the setup.exe file and select Run as Administrator to ensure the registry updates correctly.

Port Setting: During setup, choose Manual Setup and assign the plotter to COM3 if possible, as this avoids common conflicts with Bluetooth adapters.

Restart: Reboot your computer after the installation finishes to finalize the driver setup.  Compatibility & Software  Driver Jinka 1351 28 - Facebook

Ultimate Guide: Download Driver Cutting Plotter Jinka 1351 (Direct Links & Setup)

If you’ve recently acquired a Jinka 1351 or are reinstalling your workstation, finding the right driver is the most critical step to getting your vinyl cutter running. The Jinka 1351 is a workhorse in the signage industry, but because it often uses a USB-to-Serial interface, Windows doesn't always recognize it automatically.

This guide provides the necessary links and a step-by-step walkthrough to get your plotter communicating with your PC. 1. Identify Your Connection Type Before downloading, check how your Jinka 1351 is connected:

USB Cable: Most users need the CH340 or PL2303 USB-to-Serial driver.

Serial Cable (9-pin): You generally do not need a driver for a direct DB9 serial connection; you simply need to configure the COM Port in your software (ArtCut, Flexi, or SignMaster). 2. Download Links for Jinka 1351 Drivers

Since Jinka uses universal USB chips, you can download the official drivers here:

USB Serial Driver (CH340/CH341): Download here via SparkFun or Official WCH Site. (This is the most common driver for Jinka machines).

Alternative USB Driver (PL2303): Download via Prolific. (Used in older Jinka models).

CorelDraw Plug-in: If you plan to cut directly from CorelDraw, you will need the Jinka CorelDraw Driver/Plug-in. 3. How to Install the Jinka 1351 Driver

Disconnect the Plotter: Unplug the USB cable from your computer.

Run the Installer: Open the .exe file you downloaded (likely CH341SER.exe).

Click Install: Wait for the "Driver install success" message.

Connect the Plotter: Plug the USB cable back in and power on the Jinka 1351. Check Device Manager: Right-click the Start button > Device Manager. Look under Ports (COM & LPT).

You should see "USB-SERIAL CH340 (COM3)" or similar. Note the COM number. 4. Configuring Your Cutting Software

The driver only creates the "bridge." You still need to tell your software where to find the plotter.

Software: Select "Jinka" or "RedSail" (Jinka uses RedSail command sets). Model: 1351 (or 1350).

Port: Match this to the COM port found in your Device Manager (e.g., COM3). Baud Rate: Usually 9600 or 38400. Flow Control: Hardware or RTS/CTS. 5. Troubleshooting Common Issues Conclusion: The driver for the Jinka 1351 is

"Unable to open port": Ensure no other software (like a printer driver) is using that COM port. Try changing the COM port number in Device Manager to COM1 or COM2.

Garbage Characters/Random Lines: This is usually a Baud Rate mismatch. Ensure the Baud Rate on the physical plotter screen matches the setting in your software.

Windows 10/11 Driver Signature: If the driver fails to install, you may need to temporarily disable "Driver Signature Enforcement" in Windows recovery settings. Summary Table for Jinka 1351 Setup Setting/Value Driver Chip CH340 / CH341 Emulation RedSail / DMPL Baud Rate 9600 / 38400 Common Software ArtCut, SignMaster, AnyCut, FlexiStarter Need help with specific software?

: Use this Google Drive Link for standard cutting without contour features. Jinka PE PRO 1353/1351 (Auto Contour Cut)

: Download from this Google Drive Link if your machine supports automatic contour cutting.

CorelDRAW Plugin (CutTools): For direct output from CorelDRAW, you can find installation tutorials and related files via Jinka Indonesia's YouTube guides. Installation Steps

Extract Files: Download the ZIP or RAR file and extract it using a tool like WinRAR.

Run Setup: Open the folder and run setup.exe. Follow the on-screen prompts to select your language and destination folder.

Port Configuration: Once installed, connect your plotter via USB. Open your software (e.g., CorelDRAW or Artcut) and ensure the port is set to Direct USB Port or JinKa USB Port in the communication settings.

Verify Connection: Check the Device Manager on your PC; the plotter should appear under Ports (COM & LPT) as a recognized device. Compatible Software

CorelDRAW: Supported via plugins like CutTools or SignTools.

SignMaster / AnyCut: Often bundled with newer Jinka models for easier contour cutting.

Artcut: A common legacy software used for basic vinyl cutting.

If you're having trouble with a specific software like CorelDRAW or SignMaster, I can help you with the exact plugin setup or port settings for those programs. Driver Jinka 1351 28 - Facebook

Often, the driver is not a standalone file but included within the cutting software installation disc (ArtCut 2009 or 2018 versions commonly shipped with this machine).

I couldn’t find an official Jinka 1351 driver hosted by the manufacturer.
However, users have reported success with this driver package (for Windows 10/11, 64-bit):

👉 [Link placeholder – e.g., “Download Jinka 1351 Driver (ZIP, 4MB)”]
(You would insert your actual file link here – e.g., from Google Drive, Dropbox, or a trusted driver site like DriverGuide or CNCzone.)

If you have a verified safe link, please share it below.
Otherwise, try this generic HP-GL plotter driver built into Windows: