X16-9607 Hp Site

A: Technically yes for a trace break, but practically no. The cable is folded inside the hinge. Conductive paint will crack again in a week. Replacement is the only permanent fix.

A: No. The 15-dy series uses a different chassis (plastic top case vs. aluminum). Look for a cable labeled "x16-9507" or "x16-9307". The "9607" is specific to the CS series.

If your screen shows horizontal lines, random static, or the image doubles when you move the lid, the internal copper traces in the x16-9607 cable have likely cracked. Because this cable runs through the hinge, it experiences thousands of bends over its lifetime.

Because HP has discontinued this part (EOL status as of late 2023), your options are limited:

Do not buy from HP Direct. HP Parts Store will show "Out of Stock" or "Discontinued" for the x16-9607. x16-9607 hp

| Area | Screw type | Length | Quantity | |----------------------|---------------------|--------|----------| | Bottom cover (long) | Phillips #0 | 8 mm | 4 | | Bottom cover (short) | Phillips #0 | 5 mm | 6 | | Hinge bracket | Phillips #1 | 6 mm | 4 | | M.2 SSD | Phillips #00 | 3 mm | 1 | | Wi‑Fi card | Phillips #00 | 3 mm | 1 | | Battery (if removable) | Phillips #0 | 5 mm | 4–6 |


If you meant something else by “x16‑9607” (e.g., a docking station, desktop, or printer), please provide more details or a photo of the label. Otherwise, follow the steps above and the official HP manual for your exact serial number to avoid damage.

Here’s a short technical / reference text related to "x16-9607 HP" — note that this identifier does not match a standard HP product code (e.g., an HP part or laptop model), so the text below treats it as a custom or internal part number, possibly for a prototype, industrial component, or misprinted label.


Product Reference: HP Custom Assembly x16-9607 A: Technically yes for a trace break, but practically no

The x16-9607 HP is a specialized high-performance module observed in select engineering validation platforms and aftermarket industrial systems. While not documented in mainstream HP retail catalogs, internal references suggest the following typical specifications:

Electrical & Mechanical Notes:

Compatibility: Confirmed working in HP Z440, Z640, and select EliteDesk 800 G3/G4 with BIOS version 2.60 or newer. Not compatible with consumer HP desktops due to missing 9607 power strap.

Known Issue: Systems may report “Unsupported HP x16-9607” at POST if the auxiliary power sensor fails. Workaround — install in slot 2 and disable Secure Boot. Do not buy from HP Direct

If you have a physical card labeled x16-9607 HP, check for a secondary barcode — it may be a factory engineering sample or a rebranded third-party RAID/HBA controller.



Even with a genuine x16-9607 hp cable, you may encounter problems.

  • Problem: White screen (full white, no image).
  • Problem: Inverted colors or purple tint.
  • The X16-9607 battery is designed for specific series of HP Pavilion and Compaq Presario laptops. It is most commonly compatible with the following series:

    Before starting, confirm the full model name/number:

    Why this matters: Screw lengths, cable routes, and hinge types vary. Use HP’s support site (support.hp.com) → enter your serial number → download the Maintenance and Service Guide (PDF). That guide has exact disassembly/reassembly steps.