Usbtv007 Driver Windows 10 64 Bit (2025)

If you have stumbled upon this guide, you likely have a USB video capture device (often used to connect old VCRs, camcorders, or retro gaming consoles to a PC) and are struggling to get it to work on a modern Windows 10 or Windows 11 system.

This device—often marketed as the "EasyCAP" or "USB Video Grabber"—is notorious for driver issues. It is one of the most counterfeited and confusing pieces of hardware on the market.

Here is a breakdown of what the device is, why the drivers are difficult to find, and the step-by-step methods to get it running on a 64-bit system.

Even after installing the driver, you may face issues with the video feed.

  • Plug in the USBTV007 device.
  • Open Device Manager → find "Unknown device" or "USBTV007" (yellow exclamation).
  • Right-click → Update driver → Browse my computer → Point to extracted folder.
  • If using the installer script, run as Administrator.
  • After installation, restart PC.

    • Follow these instructions carefully. We will use the community-signed driver as it is the most reliable.

    The Usbtv007 Driver Windows 10 64 bit is not a plug-and-play experience, but with the open-source driver or the Zadig method, it is absolutely achievable. For less than $20, you can breathe digital life into your family's VHS tapes or continue playing your childhood PlayStation 2 on a modern gaming laptop.

    Final Checklist for Success:

    Have a different chipset (e.g., STK1160, EM2860)? The steps above are similar, but you will need a chipset-specific INF file. For the classic yellow USBTV007, the battle for Windows 10 64-bit compatibility has finally been won by the open-source community.

    Disclaimer: This article is for educational purposes. Always ensure you have the right to digitize your analog media. Driver versions change; verify the cryptographic signature of any .sys file before installation.

    Setting up the Usbtv007 driver on Windows 10 64-bit can be tricky since these capture devices often lack official manufacturer support. However, with the right steps, you can get your EasyCap device working to digitize old VHS tapes or monitor security cameras. Step 1: Download the Correct Driver

    Because "EasyCap" is a generic brand name, several chipsets exist. For the Usbtv007 (often labeled as SM-USB-007 or SMI Grabber Device), you need specific 64-bit files. Usbtv007 Driver Windows 10 64 Bit

    Manual Download: You can find verified community drivers on repositories like GitHub (samuelcarreira) or DriverScape.

    Version Note: Version 1.0.8.28 is highly recommended for Windows 10 64-bit stability. Step 2: Manual Installation (The Most Reliable Method)

    Windows 10 often fails to automatically recognize these devices, identifying them only as an "Unknown Device" or "usbtv007" with a yellow exclamation mark.

    Extract the Files: Unzip your downloaded driver package to an accessible folder.

    Open Device Manager: Right-click the Start button and select Device Manager. Locate the Device: Look for "usbtv007" or " SM-USB-007

    " under "Other devices" or "Sound, video and game controllers".

    Update Driver: Right-click it and choose "Update driver" > "Browse my computer for drivers".

    Direct to Folder: Navigate to the extracted folder (specifically the win7_64 folder, which is compatible with Win 10 64-bit) and click Next.

    Confirm: Once installed, the device should appear as "OEM Device" or " SMI Grabber Device ". Step 3: Recommended Software

    Once the driver is active, you need a program to view or record the video feed. If you have stumbled upon this guide, you

    OBS Studio: A top free choice for recording and deinterlacing old analog signals.

    VirtualDub: A lightweight alternative for simple video capture. Troubleshooting Common Issues

    Core Isolation/Memory Integrity: On newer versions of Windows 10/11, you may need to disable Core Isolation in Windows Security settings for the driver to load properly.

    Interference: Plug the device directly into the back of your PC (motherboard ports) rather than a USB hub or front panel to ensure stable power and minimal signal noise.

    Hardware Check: Many "failed driver" issues are actually due to poor-quality USB cables. If you experience frequent disconnects, try a higher-quality extension cable.

    Looking for a specific capture software recommendation or having trouble with a "Code 10" error?

    The USBTV007 driver is a critical software component for a common "clone" of the EasyCap video capture device, used to convert analog signals from VCRs, camcorders, or retro gaming consoles into a digital format. While the hardware is inexpensive and widely available, users on Windows 10 64-bit frequently face compatibility hurdles because the original drivers were often designed for older operating systems like Windows 7. Bridge Between Eras

    The USBTV007 (often manufactured by Fushicai or Somagic) serves as a bridge for legacy media. For enthusiasts digitizing VHS tapes or monitoring FPV (First Person View) drone feeds on a laptop, this driver is the only way for modern Windows kernels to communicate with the device's specific chipset. Without the correct 64-bit driver, the device typically appears as an "Unknown Device" or "SMI Grabber" with a yellow exclamation mark in the Device Manager. Installation on Windows 10 64-bit

    Because official support for these generic devices is often non-existent, the community has developed a standard "force-install" method for Windows 10:

    Driver Procurement: Users must often source the UTV007_Drivers.zip from community archives, as the driver CDs included with the hardware are frequently corrupt or incompatible. Even after installing the driver, you may face

    Manual Update: Rather than using an installer, you typically right-click the device in Device Manager, select "Update Driver," and manually point Windows to the Win7_64 folder within the extracted driver files.

    Security Bypass: On newer versions of Windows 10 (and Windows 11), users may need to disable Core Isolation (Memory Integrity) in the Windows Security settings to allow these older, unsigned drivers to initialize. Performance and Limitations

    Even with a solid driver installation, the USBTV007 is a budget solution with known limitations.

    Video Quality: It typically captures at standard definition (PAL or NTSC) and can suffer from interlace artifacts unless software like OBS Studio is used to apply deinterlacing filters.

    Interference: Because the hardware often lacks proper shielding, using a USB extension cable is recommended to move the device away from the computer’s electromagnetic noise to reduce video static.

    Audio Issues: Some users find the built-in audio hardware poor or "unusable," often choosing to route audio through the PC's line-in port instead of the EasyCap's RCA inputs.

    Ultimately, the USBTV007 driver for Windows 10 64-bit is a testament to the longevity of analog hardware. Despite being technically "legacy," it remains a functional, low-cost gateway for preserving old memories, provided the user is willing to navigate a manual installation process.

    Here is informative content regarding the USBTV007 driver for Windows 10 (64-bit). This chipset is commonly found in low-cost analog video capture devices (e.g., EasyCAP, Honestech, no-name USB dongles).

    If Windows Update fails, you need a legacy driver package.