Cause: USB selective suspend or power management.
Fix:
If after updating, you still see a yellow exclamation mark with The drivers for this device are not installed (Code 28), try the following:
Many searches for 1E3D 198A come from owners of cheap USB fingerprint readers (often unbranded or labeled "Biometric USB Key"). These rarely work with Windows Hello out of the box.
Q: Is VID 1E3D PID 198A a virus? A: No. It is a legitimate hardware ID for a camera or imaging device. However, malware can disguise itself using this ID. Always scan with Windows Defender if you see unexpected behavior.
Q: Can I use this device on Linux or macOS?
A: On Linux, the uvcvideo kernel module supports it natively. On macOS via Boot Camp, you need the Windows driver through Boot Camp Assistant. usb device id vid 1e3d pid 198a updated
Q: Why does my device show two entries – one for video and one for audio? A: The camera has both a video interface and a microphone array. The microphone often appears under “Audio inputs and outputs” with a different PID but the same VID 1E3D.
Q: Will there be a Windows 12 driver for this? A: Windows 12 (expected late 2026) will include backward-compatible USB Video Class drivers. The generic driver will work, but an OEM-updated driver may take 3–6 months after release.
By following this guide, you should now have a fully functioning device with the latest, safest updated driver for USB VID 1E3D PID 198A. If you continue to experience issues, visit your laptop manufacturer’s support community and reference this hardware ID directly.
Understanding USB Device ID: VID 1E3D & PID 198A The hardware identification string \VID_1E3D&PID_198A corresponds to a generic Flash Disk or mass storage controller manufactured by Chipsbank Microelectronics Co., Ltd.
. This specific ID is commonly found in budget USB flash drives, SD card readers, and occasionally in deceptive "high-capacity" storage devices sold on third-party marketplaces. Device Identification & Specifications Cause: USB selective suspend or power management
This device is identified by the operating system as a standard USB Mass Storage Device Vendor ID (VID): (Chipsbank Microelectronics Co., Ltd.). Product ID (PID):
(Commonly assigned to "Flash Disk" or "Flash Reader" products). Controller Model: Often utilizes the ChipsBank CBM2199E controller or similar variants. USB 2.0 (High Speed). Performance: Typical read speeds range from 15 MB/s to 36 MB/s , with write speeds between 4 MB/s and 12 MB/s Why You Might See This Device ID
If you are searching for this ID, you are likely encountering one of three scenarios: Driver Requirements: The device usually uses the generic Windows USB Mass Storage Class
driver. If it is not recognized, it may be due to a hardware failure rather than a missing driver. Fake Capacity Verification:
This specific VID/PID is frequently associated with "fake" drives—devices programmed to report much larger capacities (e.g., 2TB or 16TB) than they actually possess. Firmware Repair: By following this guide, you should now have
Users often look for this ID to find low-level formatting tools to "revive" a drive that has become read-only or shows "No Media". Recommended Maintenance Tools
If you need to update, repair, or verify a device with this ID, the following specialized utilities from are commonly used:
USB Flash Drive Speed Tests - VID = 1e3d, PID = 198a - NirSoft
The VID 1E3D and PID 198A specifically refer to a device made by a company with the VID 1E3D. Without more context, it's challenging to provide detailed information about the device. However, I can guide you through some general information and possible updates regarding USB device IDs.