Usb Device Id Vid 0781 Pid 5567

This PID appears across multiple generations of the Ultra Fit line, typically in the following capacities:

The PID remains consistent across capacities, with minor revisions distinguished by the device’s firmware or hardware revision number.

This means the USB host controller recognized that something is plugged in, but could not read the device’s VID/PID correctly. This is typically a hardware issue (bad USB port, broken connector, or dead flash drive).

Based on the USB ID provided (VID: 0781, PID: 5567), this device is identified as a SanDisk Cruzer Glide USB Flash Drive (typically 3.0/3.1 Gen 1).

Here is a prepared review template specifically tailored for this device.


Counterfeit Risk:
The combination VID 0781 / PID 5567 is frequently cloned by counterfeit USB drive manufacturers. Fraudsters program cheap, low-capacity drives to report this VID/PID while actually containing far less usable storage (e.g., 8 GB reporting as 256 GB). This is known as capacity fraud.

The hardware ID USB\VID_0781&PID_5567 identifies a classic SanDisk Cruzer USB 2.0 flash drive. Under normal circumstances, Windows recognizes it automatically without any extra drivers. If you are seeing driver errors or a yellow exclamation mark, the issue is almost always one of three things:

This device is over a decade old. If your VID 0781 PID 5567 drive has become unreliable, it is time to retire it. Modern SanDisk drives (Ultra Fit, Extreme Pro) with USB 3.x support are far faster, more reliable, and cost less per gigabyte. usb device id vid 0781 pid 5567

Still, for the tinkerers, archivists, and legacy system users, knowing how to decode and troubleshoot this specific hardware ID is a valuable skill. Share this article with anyone still running a SanDisk Cruzer from the early 2010s – it may just save their data.


Appendix: Quick Reference

| Field | Value | |---------------|---------------------------| | Hardware ID | USB\VID_0781&PID_5567 | | Vendor | SanDisk Corporation | | Product | Cruzer Blade / Cruzer Fit | | Type | USB 2.0 Flash Drive | | Native Driver | USBSTOR.SYS (built-in) | | Common Issue | Code 43 / No drive letter |

Last updated: 2025

The USB device ID VID 0781 PID 5567 belongs to the SanDisk Cruzer Blade USB flash drive.

Depending on why you are looking for documentation, these resources and solutions may help: 1. Device Identification & Specs

Model: Primarily the SanDisk Cruzer Blade, though some speed tests also associate this ID with the "Ultra Shift" and "SanDisk 3.2 Gen 1" series. This PID appears across multiple generations of the

Performance Data: You can view real-world benchmarks, including read/write speeds for various capacities (16GB, 32GB, 64GB, etc.), on the NirSoft USB 3.0 Speed Test database. 2. Troubleshooting & Guides

"Write Protected" Error: This is a common issue for this specific device model.

Software Fix: You can try using the diskpart command in Windows to clear read-only attributes.

Hardware Failure: SanDisk forum experts often note that if software fixes fail, the drive may have entered a permanent "fail-safe" read-only mode, making it a candidate for an RMA/Warranty claim.

General Support: Official SanDisk instructions for backup, encryption (PrivateAccess), and formatting are available in the SanDisk Support Knowledge Base. 3. Drivers

Automatic Installation: SanDisk products use standard mass storage drivers provided by Windows and macOS. There are no manual "newer" drivers to download; they are updated via Windows or macOS updates.

Are you trying to recover data from a drive that isn't showing up, or sandisk pendrive problem on disk write is protected The PID remains consistent across capacities, with minor

Troubleshooting Your SanDisk Cruzer Blade: VID 0781 & PID 5567

If you’ve ever dug into your device manager or used a tool like ChipGenius and found the hardware IDs , you’ve likely identified a SanDisk Cruzer Blade

. This compact USB 2.0 drive is a staple for quick file transfers, but it occasionally runs into common "life-cycle" issues that leave users scratching their heads. DeviceHunt

Here is what you need to know about this specific device and how to handle the most common roadblocks. 1. Identifying the Hardware The "VID" (Vendor ID) 0781 is registered to SanDisk Corp . The "PID" (Product ID) 5567 specifically maps to the Cruzer Blade series DeviceHunt Interface: USB 2.0 (High Speed). Capacities: Commonly found in 4GB, 8GB, 16GB, and 32GB variants. Performance:

Typically averages a read speed of ~15–20 MB/s and a write speed of ~4–7 MB/s. 2. The Dreaded "Write Protected" Error

A frequent issue reported for the VID 0781 PID 5567 is the drive suddenly becoming write-protected SanDisk Forums Why it happens:

SanDisk drives are designed to go into a "fail-safe" read-only mode when the internal controller detects a potential hardware failure. This protects your data so you can still copy it off, even if you can't save anything new. Can it be fixed? While users often try

or registry edits, these software fixes rarely work for hardware-level protection. If your drive is locked, your best bet is to check your warranty status and consider an RMA (Return Merchandise Authorization). SanDisk Forums 3. Drivers and Firmware VID = 781, PID = 5567 - USB Flash Drive Speed Tests

The SanDisk Cruzer Glide is a budget-friendly, high-capacity USB 3.0 flash drive designed for everyday data transport. It distinguishes itself with a retractable connector design, eliminating the risk of losing a cap. While it offers significant improvements in read speeds over USB 2.0 predecessors, its write speeds are tailored more for document storage and moderate file transfers rather than heavy throughput tasks like 4K video editing.