Upgrade Medianav 913 To 10131 Official

Absolutely.

The good:

The bad:

Before we get into the weeds, let's address the elephant in the glovebox. Why 10.1.31? This is widely considered the "end-of-life" stable build for the original Medianav hardware (the one with the SD card slot behind the flip-down screen).

If you are on 9.1.3, you are suffering from:

Version 10.1.31 fixes almost all of this. It doesn't turn your Medianav into an iPad, but it makes it feel intentional rather than broken.

Upgrading your MediaNav from 9.1.3 to 10.1.3 breathes new life into an older infotainment system, providing modern maps and a smoother interface.

Disclaimer: Modifying firmware carries a risk of voiding your warranty or damaging the infotainment unit. Always ensure your vehicle's battery is fully charged before attempting a software update.

The goal of upgrading MediaNav 9.1.3 to 1.0.13.1 is a common inquiry among Renault and Dacia owners looking for modern features like Android Auto or Apple CarPlay.

However, it is critical to understand that a software-only upgrade from 9.1.3 to 1.0.13.1 is technically impossible due to hardware differences. Understanding the Generations Update MediaNav 9.1.3 to Android version 1.0.13.1? upgrade medianav 913 to 10131

Upgrading from MediaNav 9.1.3 to 1.0.13.1 is officially not possible because they run on entirely different hardware and operating systems. Why They Aren't Compatible

MediaNav 9.1.3 (Evolution): Runs on Windows CE 6.0. This is considered the final and most stable official update for this hardware generation.

MediaNav 1.0.13.1 (MN3): Runs on Linux/Android. This system has a more powerful processor and a capacitive (more sensitive) touch screen that the older 9.1.3 hardware cannot support. Key Feature Differences

The primary reason users often want to move to version 1.0.13.1 or higher is for Android Auto or Apple CarPlay support.

Update Maps On Media Nav Evolution 9.1.3 (WinCE 6.0) - Mrestore

Directly upgrading a MediaNav device from version 9.1.3 (Windows CE) to 1.0.13.1 (Linux) is not possible due to incompatible hardware. Attempting this upgrade can permanently damage the unit; instead, users can apply official 9.1.3 updates, use custom firmware like Menaco, or upgrade the hardware for newer functionality. For more details, watch the explanation at Update MediaNav 9.1.3 to Android version 1.0.13.1?

Updating MediaNav from 9.1.3 to 1.0.13.1: Hardware vs. Software

Upgrading from version 9.1.3 to version 1.0.13.1 is not a standard software update because these versions belong to two different hardware generations of the MediaNav system.

Version 9.1.3 is the final official firmware for the MediaNav Evolution (v1), which runs on the Windows CE operating system. When “Update successful” appears, remove USB and restart

Version 1.0.13.1 is firmware for the newer MediaNav Evolution 2 (v2 or MN3), which runs on a Linux-based operating system.

Because the underlying operating systems and hardware (processor and RAM) differ, you cannot simply install version 1.0.13.1 onto a device currently running 9.1.3 via a USB update. The Path to 1.0.13.1: Hardware Replacement

To "upgrade" to version 1.0.13.1, you must physically replace your existing head unit with the newer Linux-based MediaNav Evolution 2 module. Hardware Compatibility: The newer units (often part number LAN5810WR0 Go to product viewer dialog for this item.

) physically fit into the dashboard slots of vehicles that use the older Evolution v1 units.

Key Benefits: Moving to the 1.0.13.x system provides native support for Apple CarPlay and Android Auto, which are not available on the 9.1.3 version.

Installation Note: Replacement units from third-party sellers or salvaged vehicles may need to be "coded" with your vehicle's VIN and specific configuration (like camera settings) to function correctly. Maintaining Your Current 9.1.3 System

If you choose to stay with your current hardware, version 9.1.3 is already the most advanced official software available for that device. You can still perform regular maintenance through official channels:

Official updates usually expect a specific folder/file layout on the USB root. Typical structure:

Exact names vary by OEM build. You should see a README or checksum. If you have an archive, extract it and place the expected folder(s) at the USB root. Absolutely

The first boot after upgrade still takes about 45 seconds. Do not panic. The second boot will be faster.

Go into the settings. Do a "Factory Reset" from the hidden menu (Settings > System > Factory Reset). This clears the old cache from 9.1.3.

Turn off the car. Wait for the screen to go completely black (about 2 minutes).

Gently pull the plastic bezel surrounding the screen. It is clipped in. Start from the bottom right corner near the hazard light button. Pop it off. You will see four Torx screws (T20). Remove them.

Carefully pull the screen forward. Behind it, nestled in a black plastic housing, is the SD card. Push it to click it out.

Hold on. Do not lose this card. This is your brain transplant.

This is the trickiest part. Renault does not host these files on a public website. You cannot get them from the official MyRenault app for this specific cross-grade (9->10).

Safe sources for the Medianav_10.1.3.zip (or .rar) file:

Important: The file name should look like Medianav_10.1.3_Full_NA.zip (NA = North America) or EU_10.1.3. You need the FULL update, not an incremental patch.

Check the MD5 checksum after downloading (using tools like WinMD5). If the checksum doesn’t match the forum post, the file is corrupt. Do not use it.