Upgrade Medianav 9.1.3 To 1.0.13.1 «500+ Updated»
You need the official firmware package. Warning: Never download "cracked" or "universal" files from forums. Use a verified source or generate the file via the official Renault/Dacia tool (if available in your region).
For this guide, we assume you have obtained the correct file: Medianav_Update_1.0.13.1.zip
Upgrading from Medianav 9.1.3 to 1.0.13.1 is highly recommended for 95% of users. The improvements in stability, speed, and smartphone compatibility are undeniable. It transforms a frustrating, laggy system into a reliable daily driver.
Do not upgrade if:
Pro Tip: Before starting, take a photo of your current system information screen (version 9.1.3). If anything goes wrong, a dealer can use that photo to re-flash your unit, though they may charge a fee.
Published by: Automotive Tech Hub | Reading time: 8 minutes
If you own a Renault, Dacia, or Lada vehicle equipped with the Medianav (also known as MediaNav or RNM – Renault New Media) infotainment system, you have likely encountered two specific firmware versions: 9.1.3 and 1.0.13.1.
Navigating the numeric maze of firmware versions can be confusing. Why would you go from 9.1.3 (which sounds newer) to 1.0.13.1 (which sounds older)? The answer lies in understanding that Mediannav versions are not linear decimals; they represent different branches of software development.
In this guide, we will break down exactly why you should upgrade from Medianav 9.1.3 to 1.0.13.1, the benefits, the risks, and a step-by-step walkthrough to ensure a safe and successful update.
If your Medianav still says "9.1.3" in the settings, you are living in the past. The 1.0.13.1 firmware is the final, polished state of that hardware. It fixes the Bluetooth bugs, modernizes the UI, and saves you €500 on a Chinese Android head unit.
Do not let the lower version number fool you. Upgrade to 1.0.13.1, and you will finally stop hating your car’s infotainment system.
Disclaimer: This process involves modifying manufacturer firmware. Proceed at your own risk, ensure your car battery is on a charger, and double-check your exact Medianav generation (MEDIA NAV Evolution vs. MEDIA NAV 2.0) before proceeding.
Directly upgrading a MediaNav device from version via a software update is not possible
because they run on different hardware and operating systems Version 9.1.3 is the final official update for the MediaNav Evolution (v1) , which runs on Windows CE Version 1.0.13.1 (and other 1.0.x.x versions) belongs to the MediaNav Evolution 2 (ULC4) , which runs on and supports Android Auto/Apple CarPlay. Differences Between Systems MediaNav Evolution (v1) MediaNav Evolution 2 (ULC4) Firmware Versions 5.x.x to 9.1.3 1.0.x.x to 1.0.15.x Operating System Windows CE 6 Hardware Type LG LAN5200 LG LAN5800 Connectivity Standard Bluetooth/USB Android Auto & Apple CarPlay How to Get Version 1.0.13.1
Since you cannot bridge these versions with software, you have two primary options: Hardware Swap
: You can replace your existing 9.1.3 head unit with a newer MediaNav Evolution 2 (ULC4) unit. This is often a "plug and play" physical installation in Renault and Dacia vehicles, though some configuration via Micom Manager
might be needed to align with your car's specific features (like the rearview camera). Aftermarket Firmware upgrade medianav 9.1.3 to 1.0.13.1
: If you want new features without swapping hardware, some users install third-party "skins" like
to add video players or newer maps, though these still run on the old Windows CE base. : Attempting to force-load a 1.0.x.x file onto a 9.1.3 system will likely brick the device or instructions for installing custom firmware on your 9.1.3 device? Update MediaNav 9.1.3 to Android version 1.0.13.1?
It is not possible to upgrade a MediaNav system from version 9.1.3 to 1.0.13.1 via a software update because they run on entirely different hardware and operating systems. Why the Upgrade Isn't Compatible
The jump from 9.1.x to 1.0.x represents a transition between two different generations of MediaNav devices:
MediaNav Evolution (Version 9.1.3): Runs on Windows CE 6.0 hardware. Version 9.1.3 is generally the final official software update for this specific hardware generation.
MediaNav Evolution 2 / ULC4 (Version 1.0.13.1): Runs on a newer Linux-based platform. This hardware is more powerful and supports modern features like Android Auto and Apple CarPlay, which the older 9.1.3 hardware cannot support natively. Your Options
Because these versions are incompatible, you cannot simply download a file to your USB drive to bridge the gap. Here are your alternatives: MediaNav Evolution Update - car multimedia software
The journey from 9.1.3 to 1.0.13.1 is a rite of passage for many Renault and Dacia owners. By following this guide, you have extended the life of your infotainment system, avoided the cost of a new aftermarket head unit, and gained a modern interface.
Have you successfully completed the upgrade? Share your experience in the comments below. If you encountered the infamous "black screen of death," refer to our companion guide on recovering a bricked Medianav via serial port (link below).
Drive safe, and enjoy your upgraded Medianav.
Disclaimer: This guide is for informational purposes only. The author is not responsible for any damage to your vehicle or infotainment system. Always verify firmware compatibility with your vehicle’s VIN.
Upgrading your Dacia or Renault MediaNav system from the older Linux-based 9.1.3 firmware to the modern Android Auto and CarPlay compatible 1.0.13.1 version is the most significant improvement you can make to your car's interior experience. This transition represents a jump from the MediaNav Evolution 1 to the MediaNav Evolution 2 (MN3) generation. Why Upgrade to 1.0.13.1?
The move to firmware version 1.0.13.1 provides several transformative benefits that go beyond simple bug fixes.
Smartphone Integration: Gain native support for Apple CarPlay and Android Auto.
Fluid Interface: Experience a much faster touch response and modernized UI menus.
Stability: Version 1.0.13.1 is widely considered the most stable "final" build for this hardware generation. Wait until the process reaches 100% and the
Enhanced Navigation: Access up-to-date maps through your phone rather than relying on outdated built-in SD card data. Hardware Requirements and Compatibility
Before you begin the software process, it is vital to understand that 9.1.3 and 1.0.13.1 run on different hardware architectures.
Hardware Swap: You cannot simply "flash" 1.0.13.1 onto a 9.1.3 head unit. The 9.1.3 system uses a MIPS processor, while 1.0.13.1 requires the ARM-based hardware found in Evolution 2 units.
The Upgrade Path: To achieve this upgrade, you must replace your physical head unit with a newer ULC4 model (often found in 2019+ models) and then update that unit to the 1.0.13.1 software.
Plug-and-Play: Fortunately, the physical dimensions and the 24-pin/12-pin connectors are identical across these generations, making the physical swap straightforward. Step-by-Step Installation Guide
If you have acquired the newer hardware and need to ensure it is running the peak 1.0.13.1 firmware, follow these steps. 1. Prepare Your USB Drive
Use a high-quality USB 2.0 or 3.0 drive with at least 8GB of space. Format the drive to FAT32. This is a critical step; NTFS or exFAT formats will not be recognized by the MediaNav system. 2. Download the Firmware
Locate the official upgrade.lgu file for version 1.0.13.1. Place this file directly in the root directory of your USB drive. Do not put it inside a folder. 3. Execution
Start your car's engine to ensure a constant power supply. If the unit loses power during the update, it can become "bricked" or permanently stuck on the logo screen. Insert the USB drive. The system will detect the update and ask if you wish to proceed. Tap "Update." 4. The Waiting Process
The screen may turn black or restart several times. This is normal. Do not remove the USB drive or turn off the ignition until the radio returns to the main menu and displays the home screen. Troubleshooting Common Issues
"File Not Supported": Ensure the file is named exactly upgrade.lgu and the drive is FAT32.
Update Button Greyed Out: This usually means the system already has 1.0.13.1 installed or a newer version (like 1.0.15.x). Check your current version in Settings > System > System Version.
Mic Issues After Swap: If you swapped hardware from 9.1.3 to a newer unit, you might need to enter the "Micom Manager" (service menu) to enable the rear-view camera or adjust microphone gain settings. Final Thoughts on the Transition
Upgrading to 1.0.13.1 turns a dated infotainment system into a modern hub. By moving to the newer hardware required for this firmware, you eliminate the lag and limited connectivity of the 9.1.3 era. It is the single best value-for-money modification for Duster, Sandero, and Logan owners looking to modernize their ride.
Upgrading MediaNav from version not possible through standard software updates
. These two versions belong to different hardware generations with fundamentally incompatible operating systems: MediaNav Evolution (9.1.3): Windows CE , an older Microsoft platform. MediaNav MN3 (1.0.13.1): Linux-based You need the official firmware package
system and features more powerful hardware, including a faster processor and a more responsive capacitive touchscreen. Key Differences Version 9.1.3 Version 1.0.13.1 Operating System Windows CE 6.0 Hardware Gen MediaNav Evolution (MN2) MediaNav Late Gen (MN3) Smartphone Link No native support Android Auto & Apple CarPlay Upgrade Path Max official version is 9.1.3 Starts at version 1.0.x Recommended Actions Check for Latest 9.1.3 Fixes:
If you are experiencing bugs, ensure you are on the "final" stable build of the Windows CE platform, which is generally 9.1.3. Hardware Swap:
To get version 1.0.13.1 and its features (like Android Auto), you must physically replace your head unit with an MN3 model (often found in newer Renault/Dacia vehicles). Third-Party Software: Some users use custom firmware like
to add features to 9.1.3, but this still does not change the core OS to the Linux-based 1.0.13.1. Are you looking to upgrade specifically for Android Auto/Apple CarPlay Update MediaNav 9.1.3 to Android version 1.0.13.1?
It is important to note that you cannot software-upgrade a MediaNav Evolution 9.1.3 to version 1.0.13.1 because they run on fundamentally different hardware and operating systems.
Version 9.1.3: Based on Windows CE (LG LAN5200 WR2 hardware).
Version 1.0.13.1: Based on Linux (LG LAN5800WR0 hardware), often referred to as "MediaNav Evolution v2".
To transition from 9.1.3 to 1.0.13.1, you must perform a physical hardware swap by replacing your current head unit with a newer Evolution v2 unit. Hardware Upgrade Process
If you acquire a MediaNav Evolution v2 unit (version 1.0.x.x), follow these steps for the replacement:
Verify Compatibility: Most MediaNav units from 2012 to 2018 share the same physical shape, mounting points, and rear connectors. Remove Original Unit: Carefully pull off the plastic dashboard surround.
Unscrew the four Torx screws holding the 9.1.3 unit in place.
Disconnect the wiring loom and antenna cables from the back. Install New Unit: Connect the existing wiring to the new v2 unit.
Secure the unit with the Torx screws and replace the dashboard trim. Configuration: Enter the Radio Code for the new unit to unlock it.
Access the MICOM menu if needed to enable specific features like a reverse camera or to toggle the "WAKE" setting if the unit does not start automatically with the car. Managing Your Current 9.1.3 System
If you choose to stay with your current hardware, 9.1.3 is considered the final official stable version for that platform. You can still perform maintenance: Update MediaNav 9.1.3 to Android version 1.0.13.1?
