Sh1 94v-0 Datasheet < HOT × PICK >

If you cannot find the official JST SH1 94V-0 datasheet, you may consider equivalents. However, beware of pin-to-pin compatibility.

| Feature | JST SH1 94V-0 | Molex PicoBlade (51021) | Hirose DF13 | | :--- | :--- | :--- | :--- | | Pitch | 1.0mm | 1.25mm | 1.25mm | | Current | 1.0A | 1.5A | 1.0A | | V-0 Availability | Yes (Select series) | Yes (Nylon 46) | Yes (Select series) | | Interchangeable? | No (Different pitch) | No | No |

Verdict: Always use the exact SH1 series. The 1.0mm pitch of SH1 is unique. Forcing a 1.25mm connector will destroy the PCB pads. sh1 94v-0 datasheet

SH1 is typically a top marking code for a surface-mount device (SMD). It is not the full part number.

Here are common part numbers you will find in an SH1 94V-0 datasheet: If you cannot find the official JST SH1

Top Entry (Vertical) Connectors:

Side Entry (Right Angle) Connectors:

Mating Housings (Crimp type):

Note: Always verify the "V-B" suffix in the housing part number, as this often designates the improved flammability grade. Side Entry (Right Angle) Connectors:

Because "SH1 94V-0" is a combination of a board label and a safety rating, there is no single datasheet with this title. To find the technical specifications, you need to identify the actual component.

How to proceed: