Rok Power Washer Instructions New Site

Failure to follow these steps can destroy the pump immediately.

NEVER run the power washer without water flowing through it. Run dry time >5 seconds can damage seals/pump.

Now you can plug the unit into a grounded outlet (GFCI protected is best). rok power washer instructions new

ROK Instruction Note: Never change nozzles while the gun is triggered or the motor is running. Always lock the gun (push the safety latch), swap nozzles, then unlock.

Your ROK power washer likely has a detergent siphon tube (a thin clear hose attached to the pump). Failure to follow these steps can destroy the

Warning: Never let detergent dry on the surface. Never use bleach or acid (it will destroy pump seals).

The most critical part of the instructions is the "Start-Up" section. NEVER run the power washer without water flowing through it

If the stock hose is too short, buy a high-pressure extension hose (rated for your PSI). Never use standard garden hose as a replacement high-pressure line.