Pos Printer Driver V11.3.0.1 May 2026

Installing a POS driver is not like installing a standard inkjet driver. You must follow a specific order.

  • Configuration: After installation, go to your Windows "Devices and Printers" settings, right-click the newly installed printer, and ensure it is set as the default printer if required.

    • Note: If you are looking for a specific feature or are encountering an error, please provide more context (e.g., the printer model you are using or the operating system version like Windows 10/11) for further assistance.

    This guide covers the installation and configuration of the POS Printer Driver v11.3.0.1

    , a common driver used for generic 58mm and 80mm thermal receipt printers (often branded by manufacturers like www.zjiang.com 1. Preparation Before starting, ensure your thermal printer is: Plugged in and turned on. to your computer via USB (most common) or serial cable. Loaded with paper , as the final step often involves a test print. Nextar POS Software 2. Installation Steps Run the Installer : Locate and open the file POS Printer Driver Setup V11.3.0.1.exe Accept Agreement , and select I accept the agreement Choose Path : The default installation path is typically C:\POS Printer Driver V11.3.0.1 Install Driver to complete the software setup. Identify Printer Type

    : A configuration screen will appear. Select the correct model based on your paper width: : For 58mm (approx. 2-inch) printers. : For 80mm (approx. 3-inch) printers. pos printer driver v11.3.0.1

    : Choose your Windows version (e.g., Windows 10, Windows 11). Port Selection and select the port the printer is using. If using USB, look for the highest numbered USB port (e.g., Begin Setup

    (or "Check Port") to finish. Windows may ask for permission; click 3. Verification & Troubleshooting Test Print Settings > Devices > Printers & Scanners , right-click your new printer, and select Printer Properties to send a test page. Wrong Port : If it doesn't print, go back to Printer Properties > Ports and try a different USB port from the list. Driver Identification : To confirm you are on the right version, check the tab in the printer's properties window. Generic Setup : If the specific driver fails, some systems can use Microsoft's generic printer setup found in the "Printers & scanners" menu. i3 Sistemas like Nex or Square?

    Download and install the latest printer drivers - Microsoft Support

    Step 1: Uninstall older drivers

    Step 2: Run the v11.3.0.1 installer

    Step 3: Select your connection type during install

    Step 4: Connect and power on the printer

    Step 5: Configure in POS Software

    Older POS printers often fail when waking from sleep mode. This driver version includes a revised USB suspend/resume handler that prevents the "Printer Offline" error after the PC wakes up.

    Cause: The driver’s default GPIO pin setting may be wrong.
    Fix:

    The driver now supports dual-drawer kick-out via the same USB interface using OPOS property DrawerNumber=2. This is critical for businesses operating two cash stations on one terminal.