Phison Ps2251-07 Firmware: Update Tool

Before touching the tool, you must understand what you are working with. The Phison PS2251-07 (PS2307) is a USB 3.0 NAND flash controller. It succeeded the popular PS2251-03 and brought several improvements:

You will find this controller in brands like Kingston DataTraveler (Generation 3/4), Corsair Flash Voyager, Patriot Memory, and many generic "high speed" USB drives from China.

How to confirm you have a PS2251-07: Download ChipGenius (Windows) or USBDevTool. These utilities read the USB Device Descriptor and report the vendor ID (VID), product ID (PID), and, most importantly, the controller model. Look for:

Do not proceed without verification. Using the wrong firmware will permanently destroy your drive. Phison Ps2251-07 Firmware Update Tool


Click the "Read" or "Scan USB" button (looks like a magnifying glass). The tool should populate a line with your drive's information. Yellow or red boxes indicate errors.

Before diving into the tool, let’s understand what you are working with.

Technical Specifications:

Why does firmware fail? Firmware corruption can happen due to unsafe ejection, power surges during a write operation, bad sectors on the NAND chip, or simply aging. When the firmware is corrupted, the controller doesn't know how to communicate with the NAND chip, rendering the drive useless.

The Phison PS2251-07 Firmware Update Tool rewrites this low-level software directly to the controller, effectively performing a "brain transplant" on your USB drive.


Green circle with OK or PASS. Capacity shows correct. Replug the drive. Before touching the tool, you must understand what


Run MPTool.exe as Admin. Click the Update or Refresh icon. Your PS2251-07 should appear with:

If not detected: try USB 2.0 port, or short two test pins (hardware recovery – see Part 7).

Phison does not release firmware to the public. However, drive manufacturers discreetly include firmware in their proprietary tools. The best sources are: You will find this controller in brands like

Always cross-reference the checksum (MD5) of the .bin file with online posts.