Philips 55put6002 56 Software Update

For minor patches:

Before diving into features, note the suffix. The 55PUT6002/56 is not the same as the European /12 model. Your TV runs specific drivers for DVB-T2 (India/APAC broadcast standards), local streaming certifications, and power management. A software update for the /56 variant ensures you don't lose tuner functionality or introduce Wi-Fi instability.

As of mid-2023, Philips has officially slowed support for the 6002 series (2017-2018 models). If your current version is TPM196E_001.002.212.002 or higher, there are no new features coming.

You should still update if:

Do not expect:

| Problem | Solution | |---------|----------| | "No update found" | You already have the latest version. | | USB not recognized | Reformat USB to FAT32, use smaller (≤32GB) drive, try another USB port. | | Update stuck at 99% | Wait 10+ minutes. If frozen, power cycle (risk: attempt only if necessary). | | TV won't start after update | Unplug 30 sec → replug. If still fails, contact Philips service. | philips 55put6002 56 software update

✅ Do the update if your TV is acting up (Wi-Fi drops, sound sync issues, app crashes).
❌ Skip the update if everything works fine – “if it ain’t broke, don’t fix it.”

Have you updated your Philips 55PUT6002 recently? Let us know in the comments if the new firmware broke or fixed your TV.

Disclaimer: Always download firmware from Philips’ official website. This guide is for informational purposes. Misusing the USB update can void your warranty or brick the TV.

To update the software for your Philips 55PUT6002/56 , you can use the built-in internet update feature or perform a manual update using a USB flash drive from the Philips Support website. Method 1: Update via Internet (Recommended)

If your TV is connected to the internet, this is the simplest method: Press the Home button on your remote. For minor patches:

Navigate to Settings > Update Software > Search for updates. Select Internet (recommended) and press OK.

If an update is found, follow the on-screen instructions. The TV will download the file, the screen will go black briefly, and a progress bar will appear.

Do not turn off the TV until the update completes and the Philips logo reappears. Method 2: Manual Update via USB

If the internet method fails or is unavailable, follow these manual steps:

Prepare the USB: Use an empty USB flash drive formatted to FAT32. Download the File Before diving into features, note the suffix

: Go to the Philips TV Support page and enter your model number 55PUT6002/56 .

Check Version: Download the .zip file only if the version on the website is higher than the version currently on your TV (found under Settings > About).

Extract File: Unzip the downloaded file and copy only the autorun.upg file into the root directory of your USB stick. Install on TV: Turn on the TV and insert the USB.

The update screen should appear automatically. If not, go to Settings > System > About > System update > USB. Follow the prompts. The TV will restart once finished.

Important Safety Note: Never turn off the TV or remove the USB during the installation process, as this can damage your TV's firmware. How to update your Philips Saphi Smart TV software via USB