If you’ve lost the code list, let the remote brute-force search.
The Onkyo RC-799M is a surprisingly capable remote for its age. While it lacks Bluetooth or RF, its learning feature keeps it useful for controlling a modern TV or streaming box. If you lost the manual, don’t buy a replacement—just bookmark this guide or download the PDF from one of the links above.
Have a code that’s not listed? Drop your device brand and model in the comments—I’ll help you search the full code library.
Enjoying older A/V gear? Subscribe for more vintage receiver and remote guides.
Onkyo RC-799M Go to product viewer dialog for this item. is a primary remote control for various Onkyo and Integra A/V receivers, known for its ability to manage multi-zone functions and basic control of external devices like TVs and DVD players. Essential Setup and Programming
While many replacement versions are "ready to use" for Onkyo receivers immediately upon inserting batteries, original or high-end versions can be programmed to control other home theater components. Programming for a TV:
Hold down the TV button and the Display button simultaneously for approximately 3 seconds until the remote indicator light stays lit.
Within 30 seconds, enter the 5-digit TV code using the number keys. For example, a common code for Sharp TVs is 10818.
If successful, the indicator light will flash twice. If it flashes once slowly, the programming failed. Assigning Codes to Other Devices:
Hold the desired Remote Mode button (e.g., BD/DVD, CBL/SAT) and the Display button for 3 seconds.
Enter the corresponding 5-digit code for your device brand from the official Onkyo Remote Code List. Test the device by pressing the Power button. Key Button Functions
features a layout optimized for receiver navigation and media playback. Description Zone 2 Control onkyo rc-799m remote manual
The ZONE 2 and OFF buttons allow you to manage audio in a second room independently. Setup Menu
Use the Q/Setup button to access advanced on-screen settings on your TV. Navigation
The central Cursor (arrows) and Enter buttons are used for menu navigation and radio tuning. Dimmer
Adjusts the brightness of the receiver's front panel display in three steps. Compatibility List
is compatible with a wide range of Onkyo home theater systems and receivers, including:
HT-S Series: HT-S3300, HT-S3400, HT-S3500, HT-S5100, HT-S5400, HT-S5500 HT-R Series: HT-R391, HT-R548, HT-R558, HT-R590, HT-R591
TX-SR Series: TX-SR309, TX-SR313, TX-SR506, TX-SR576, TX-SR607, TX-SR608 TX-NR Series: TX-NR414, TX-NR515 Troubleshooting Common Issues Anderichttps://www.anderic.com
Onkyo RC-799M is a dedicated audio/video receiver remote. While it works instantly with many Onkyo receivers right out of the box, you may need to program it to control other devices like your TV. Amazon.com Programming Instructions
To program the RC-799M to control your TV or other components: Enter Setup Mode : Simultaneously press and hold the (or desired Remote Mode button) and
buttons for about 3 seconds until the remote's indicator light stays lit. Input Code : Within 30 seconds, enter the 5-digit remote control code for your device using the number buttons. : If the code is accepted, the Remote Mode button will flash twice : Point the remote at the device and press the button to verify it turns on or off. Quick Reset & Troubleshooting If the remote is unresponsive or glitchy, try these steps:
Here are a few articles and resources that may be helpful for the Onkyo RC-799M remote manual: If you’ve lost the code list, let the
Some specific topics related to the Onkyo RC-799M remote manual that you may find useful include:
The Onkyo RC-799M Go to product viewer dialog for this item.
is a dedicated infrared remote control typically used with Onkyo AV receivers like the HT-R391, HT-RC330, and TX-SR313 . Key Usage Instructions
Plug-and-Play: For most compatible Onkyo receivers, this remote requires no programming . Once you insert two AA alkaline batteries, it should operate the receiver immediately .
Operating Range: Ensure you are within roughly 10 meters (33 feet) of the receiver and pointing the remote directly at the receiver's IR sensor Device Limitations: Standard versions of the
and most third-party replacements cannot be programmed to control other devices like your TV, DVD player, or cable box . Programming (If Supported)
While many versions are non-programmable, some users have reported success with the following standard Onkyo programming sequence to control basic TV functions :
Locate the 5-digit code for your TV brand (e.g., 10818 for Sharp).
Press and hold the [REMOTE MODE] button (like TV) and [DISPLAY] simultaneously for about 3 seconds until the button stays lit.
Enter the 5-digit code using the number keys within 30 seconds. If the code is accepted, the button will flash twice.
The Onkyo RC-799M is a dedicated remote controller designed for specific Onkyo AV receivers, such as the HT-R391, TX-SR309, and HT-RC330. Most versions of this remote work "out of the box" for these receivers and do not require complex programming unless you are attempting to control external components like a TV or DVD player. Quick Setup & Programming Enjoying older A/V gear
Initial Setup: Insert two 1.5V AA alkaline batteries. Point the remote directly at the receiver's sensor within a range of about 16 feet (5 meters). Programming for External Components:
Hold down the REMOTE MODE button (e.g., TV, DVD) you wish to program while simultaneously holding the DISPLAY button for about 3 seconds. Wait for the REMOTE MODE button to light up.
Enter the 5-digit code for your device using the number keypad within 30 seconds.
If the code is accepted, the REMOTE MODE button will flash twice.
Resetting the Remote: To clear custom codes and return to factory settings, hold down the specific REMOTE MODE button and the L NIGHT button simultaneously for 3 seconds until the mode button flashes twice. Core Button Functions Remote Control Codes - Onkyo - YUMPU
The RC-799M can learn up to roughly 40 commands from any other IR remote. Here’s how:
💡 To erase learned commands for a single device, repeat the process but press and hold Home instead of a button in step 4.
Note from the Manual: The RC-799M requires two "AA" alkaline batteries. Do not mix old and new batteries. If the remote becomes sluggish, or the LCD screen dims, replace them immediately.
The RC-799M is a system remote controller designed to operate specific Onkyo A/V receivers and home theater systems. The manual provides essential instructions for initial setup, battery installation, and programming the remote to control external devices.
The original RC-799M manual includes 20+ pages of code lists. Here are popular codes (verify with your device brand):
| Device Brand | TV Code | DVD/BD Code | CBL/SAT Code | |--------------|---------|-------------|---------------| | Samsung | 1197, 1195| 1398 | 2157 | | Sony | 1089, 1187| 1134 | 2032 | | LG | 1193, 1205| 1399 | 2123 | | Panasonic | 1110, 1158| 1355 | 2109 | | Vizio | 1236 | N/A | N/A | | Comcast (Xfinity)| N/A | N/A | 2476, 1582 | | DirecTV | N/A | N/A | 2234, 2376 |
Manual Tip: If the first code fails, repeat the process with a different code from the list. Some brands have 10+ possible codes.