The latest guidelines emphasize environmental protection:
The Nalco TRAC 115 MSDS new represents a significant shift in how this common RO antiscalant is viewed from a safety and environmental standpoint. Where older versions suggested a relatively benign profile, the latest document clearly warns of irreversible eye damage, aquatic toxicity, and new chemical incompatibilities.
For any facility using Nalco TRAC 115 – whether in a power plant, pharmaceutical water system, or food & beverage operation – replacing outdated MSDS binders with this new version is not optional; it is a legal and moral requirement to protect workers and the environment.
Always read the full SDS before handling, storing, or disposing of this product.
Disclaimer: This article is for informational purposes only and does not replace the official Safety Data Sheet provided by Nalco Water/Ecolab. Always refer to the most current SDS obtained directly from the manufacturer for legal compliance and emergency response.
The NALCO TRAC 115 is an industrial corrosion inhibitor specifically designed for cooling water systems, often integrated with 3D TRASAR™ automation. As a chemical product, its Safety Data Sheet (SDS), formerly known as an MSDS, contains critical information regarding its chemical composition, handling risks, and emergency procedures. Essential Safety Data for NALCO TRAC 115
The following information is derived from recent industrial safety guidelines and product labeling:
Primary Function: Liquid corrosion inhibitor used to protect industrial cooling water systems from scale and metal degradation. Chemical Profile: Classification: Strong Oxidizer. Appearance: Yellow liquid.
Hazard Ratings (NFPA/HMIS): Health: 2 (Moderate), Flammability: 0 (Insignificant), Reactivity: 0 (Insignificant). Health Hazards: Ingestion: Toxic if swallowed. Contact: Can cause irritation to eyes and skin.
Fire Conditions: May evolve toxic oxides of nitrogen if exposed to fire. Safe Handling & Storage Requirements To maintain workplace safety when using NALCO TRAC 115 , adhere to these industrial standards:
Personal Protective Equipment (PPE): Always wear suitable protective clothing, including gloves and eye protection.
Storage: Keep containers tightly closed and store in a cool, dry area. Do not allow the product to dry out, as it is a combustible liquid in dry form.
Shelf Life: Recent batches (e.g., manufactured in March 2025) typically have a one-year expiry period (March 2026). How to Access the Official SDS/MSDS
Because chemical formulations can be updated, it is critical to use the most current document provided by the manufacturer.
Direct Request: Nalco Water (an Ecolab company) does not always provide full SDS documents for public download due to proprietary formulations.
SDS Request Form: You can request the latest version of the NALCO TRAC 115 SDS directly through the Nalco Water SDS Request Form.
Automatic Delivery: When you purchase the product, a physical or digital copy of the latest SDS is legally required to be sent with the shipment. Application in 3D TRASAR™ Systems Safety Data Sheets - SDS - MSDS - Ecolab nalco trac 115 msds new
Nalco Water Safety Data Sheets are not available online. Click below to request an SDS / MSDS from Nalco Water customer service. . SDS Search - Ecolab
For NALCO TRAC 115 , the most current safety information characterizes it as a strong oxidizer and a potentially hazardous industrial chemical. Recent safety guidelines (dated through 2025–2026) emphasize the following key safety profiles: Safety Hazards & Warnings
Classification: It is classified as a Strong Oxidizer and is Toxic if swallowed.
Physical Hazards: It is a combustible liquid. It must not be allowed to dry, as it may evolve toxic oxides of nitrogen under fire conditions.
Health Hazards: Causes irritation to eyes, skin, and clothing. It is not intended for internal consumption and should be kept out of reach of children.
NFPA/HMIS Ratings: Typically rated with a Health hazard of 2 (Moderate), Flammability of 0 (Minimal), and Reactivity of 0 (under normal conditions). Handling & Protection
Personal Protective Equipment (PPE): Requires suitable protective clothing. Standard protocols for Nalco TRAC products often include chemical-resistant gloves, safety goggles, and ensuring adequate ventilation.
First Aid: In case of eye contact, seek medical advice immediately. Do not reuse empty containers for any purpose. How to Access the Official SDS
Ecolab (Nalco's parent company) generally does not host full Nalco Water Safety Data Sheets (SDS) for public download on their main site due to industrial proprietary standards. To get the most recent version (e.g., the 2025/2026 edition):
Direct Request: Use the Nalco Water SDS Request Form to have the specific document sent to you.
Product Shipment: The latest SDS is legally required to be included with your product shipment.
Customer Service: You can contact Nalco Water Customer Service directly or your local sales representative for access.
This guide summarizes critical safety information for NALCO TRAC 115
, an industrial chemical treatment typically used in water systems. This information is based on standard Safety Data Sheet (SDS/MSDS) protocols provided by Nalco Water/Ecolab 1. Product Identification & Hazard Overview
NALCO TRAC 115 is classified as a hazardous industrial substance with the following primary risks Strong Oxidizer:
Can intensify fire; do not allow the product to dry as it may become more reactive Acute Toxicity: Fatal or toxic if swallowed Combustible Liquid: Keep away from heat, sparks, and open flames Health Hazards: Disclaimer: This article is for informational purposes only
for Health on the NFPA/HMIS scales, indicating moderate hazard 2. Essential Safety Precautions Handling Guidelines Avoid Contact: Do not get in eyes, on skin, or on clothing Ventilation:
Use only with adequate ventilation to avoid breathing vapors or mists Personal Protective Equipment (PPE):
Wear suitable protective clothing, including chemical-resistant gloves Use safety goggles or a face shield
Wash hands thoroughly after handling and before eating or smoking files.dep.state.pa.us Storage Requirements Container Integrity: Keep containers tightly closed when not in use Incompatibilities: Do not store near acids files.dep.state.pa.us Access Control:
Keep strictly out of reach of children and unauthorized personnel Shelf Life:
Typical expiry is approximately one year from the date of manufacture (e.g., MFG Mar 2025; EXP Mar 2026) 3. Emergency Response Eye Contact: Immediately flush with water and seek medical advice Ingestion: induce vomiting. Seek medical attention immediately
Stop leaks if safe. Use non-combustible absorbent materials (like sand or earth) for containment. Do not allow runoff to enter waterways files.dep.state.pa.us May evolve toxic oxides of nitrogen under fire conditions
. Use extinguishing media appropriate for the surrounding environment. 4. Regulatory & Official SDS Access
Nalco Water does not typically provide all Safety Data Sheets for public download. To obtain the newest official SDS for your specific region, you should: Ecolab SDS Request Portal Contact your local Nalco Water representative directly for dosage and technical compatibility
In case of an emergency, call the local emergency number found on the product label or the official SDS document for a specific country or region? Safety Data Sheets - SDS - MSDS - Ecolab
The safety data sheet (SDS/MSDS) for NALCO TRAC 115 is available through the official Ecolab SDS portal. Per official policy, Ecolab typically sends the specific SDS with each product shipment, and not all sheets are publicly listed for direct download without a login or direct representative request. Product Overview Type: Liquid corrosion inhibitor.
Application: Used primarily in industrial water treatment, such as boilers, steam lines, and cooling systems. Key Ingredients: Contains Sodium Nitrite (CAS 7632-00-0). Critical Safety Information
Hazard Classification: Classified as a strong oxidizer and is toxic if swallowed. NFPA/HMIS Ratings: Health: 2 (Moderate Hazard) Flammability: 0 (Minimal Hazard) Reactivity: 0 (Minimal Hazard). Handling Requirements: Wear suitable protective clothing, goggles, and gloves. Do not get in eyes, on skin, or on clothing. Keep container tightly closed and store away from children. Emergency Contact
In the event of an accident, spill, or chemical emergency, you should call your local Ecolab/Nalco emergency contact listed on your specific shipping documents or the official Ecolab Emergency page. Safety Data Sheets - SDS - MSDS - Ecolab
NALCO TRAC 115 is an industrial liquid corrosion inhibitor used primarily in water treatment systems. As of March 2025
, updated safety and handling documentation (SDS/MSDS) highlights its status as a strong oxidizer with significant health risks if handled improperly. Core Safety Data (MSDS Summary) Classification: Strong Oxidizer, Combustible Liquid. Hazard Ratings (NFPA/HMIS): 2 (Moderate hazard). Flammability: Reactivity: Physical Form: Signal Word: WARNING (or DANGER depending on concentration
Liquid, typically provided in 37 KG net weights (India) or 25 KG canisters (Global). Key Hazards: Toxic if swallowed
Causes irritation or damage if it contacts skin, eyes, or clothing. May evolve oxides of nitrogen under fire conditions. Product should not be allowed to dry , as it can become a combustion risk. Handling and Storage Requirements Personal Protection (PPE):
Wear suitable protective clothing, including impervious gloves and eye protection. Ventilation:
Use only with adequate ventilation to keep air concentrations below exposure standards.
Keep containers tightly closed in a cool, dry place. Ensure they are properly labeled and kept away from children. Shelf Life: Recent batches (e.g., March 2025) typically carry an expiry date of March 2026 files.dep.state.pa.us Chemical & Ecological Profile SAFETY DATA SHEET OASIS 115 XP - Ecolab
Product: Nalco TRAC 115
Document type: Material Safety Data Sheet (MSDS) / Safety Data Sheet (SDS) — new version requested
The SDS gives a PEL (Permissible Exposure Limit) for Sodium Nitrite: Usually 1 mg/m3 (respirable) or "none established" for the blend. But pay attention to the Skin notation.
Nitrite is absorbed through intact skin. In high temperature systems (>120°F), dermal absorption rates skyrocket. If you are wearing a Tyvek suit but cloth gloves, you are getting a systemic dose.
Best Practice: The SDS calls for butyl rubber or nitrile gloves (>0.11mm thickness). Do not use latex.
Under the new GHS classification, Nalco TRAC 115 is typically classified as follows:
| Hazard Class | Category | Statement | | :--- | :--- | :--- | | Skin Corrosion/Irritation | Category 2 | Causes skin irritation | | Eye Damage/Irritation | Category 1 | Causes serious eye damage | | Aquatic Chronic Toxicity | Category 3 | Harmful to aquatic life with long-lasting effects |
New Pictograms on Label:
Signal Word: WARNING (or DANGER depending on concentration of phosphonates)
Previously unlisted hazards: The new MSDS includes specific information on respiratory sensitization and hazardous decomposition products (e.g., phosphine gas when overheated), which were missing in older versions.
For legal compliance and the most accurate safety data, you should obtain the official PDF directly from the manufacturer:
Disclaimer: This summary is intended for educational and quick-reference purposes only. It does not constitute a legal Safety Data Sheet (SDS). Always consult the official Nalco/Ecolab SDS for regulatory compliance.