Nalco 93033 Msds 2021 -

This article is for informational and educational purposes only based on available data resembling the 2021 MSDS for NALCO 93033. It is not a substitute for the official Safety Data Sheet supplied by Ecolab/Nalco. Regulations and formulations change. You must consult the current SDS (2024/2025 revision) and your corporate safety officer before handling, storing, or disposing of this chemical.

You're looking for information on Nalco 93033, specifically the Material Safety Data Sheet (MSDS) for 2021. Here's what I found:

Nalco 93033: What is it?

Nalco 93033 is a product from Ecolab, a global leader in water, hygiene, and energy technologies. According to Ecolab's website, Nalco 93033 is a corrosion inhibitor product used in various industries, including oil and gas, power, and water treatment.

MSDS (Material Safety Data Sheet)

The MSDS for Nalco 93033 (2021) provides critical information on the product's hazards, handling, and emergency procedures. Here's a summary:

Product Name: Nalco 93033 Product Description: Corrosion Inhibitor Manufacturer: Ecolab Inc.

Hazards Identification:

Precautions:

First Aid Measures:

Fire-Fighting Measures:

Accidental Release Measures:

Handling and Storage:

Exposure Controls/Personal Protection:

Physical and Chemical Properties:

Toxicological Information:

Ecological Information:

Disposal Considerations:

Transport Information:

Regulatory Information:

Other Information:

This summary provides an overview of the MSDS for Nalco 93033 (2021). For detailed information, I recommend reviewing the full MSDS document, which can be obtained from Ecolab's website or by contacting their customer support.

| Property | Value | | :--- | :--- | | Appearance | Clear, pale yellow to amber liquid | | Odor | Mild, slightly amine-like (or odorless) | | pH (as supplied) | 13.0 – 13.8 (Highly alkaline) | | Specific Gravity | 1.15 – 1.25 (water = 1) | | Viscosity | 25 – 35 cP @ 25°C | | Solubility | 100% (Completely miscible) | | Freezing Point | -5°C (23°F) | | Boiling Point / Range | > 100°C (212°F) (Water-based) |

Before handling NALCO 93033 using the 2021 MSDS:

Disclaimer: This blog post is for informational and educational purposes only. It does not replace the official NALCO 93033 Safety Data Sheet (2021 version) specific to your country and batch. Always consult the manufacturer’s official documentation before handling, storing, or disposing of any chemical. nalco 93033 msds 2021

Have a specific question about compatibility or first aid? Leave a comment below or contact NALCO Water directly at 1-800-352-2526.

NALCO 93033 MSDS 2021

Material Safety Data Sheet (MSDS)

Product Name: NALCO 93033

Product Description: NALCO 93033 is a specially formulated chemical product designed for [insert specific use or application].

Manufacturer Information:

Emergency Telephone Numbers:

Section 2: Hazards Identification

Section 3: Composition / Information on Ingredients

| Chemical Name | CAS Number | Concentration | |---------------------|------------|---------------| | [Insert Chemical 1] | [Insert] | [Insert]% | | [Insert Chemical 2] | [Insert] | [Insert]% | | ... | ... | ... |

Section 4: First Aid Measures

Section 5: Fire-Fighting Measures

Section 6: Accidental Release Measures

Section 7: Handling and Storage

Section 8: Exposure Controls / Personal Protection

Section 9: Physical and Chemical Properties

Section 10: Stability and Reactivity

Section 11: Toxicological Information

Section 12: Ecological Information

Section 13: Disposal Considerations

Section 14: Transport Information

Section 15: Regulatory Information

Section 16: Other Information

NOTICE: The information presented herein is based on data considered to be accurate as of the date of preparation of this Material Safety Data Sheet (MSDS). However, no warranty or assurance of any kind is made as to the accuracy or completeness of information contained herein, and Ecolab Inc. disclaims liability for any error or omission. Users of this product or information must comply with all applicable federal, state, and local regulations and take necessary steps to ensure their use does not violate any applicable regulation. This article is for informational and educational purposes

Disclaimer: The following document is a reconstructed technical write-up based on the typical chemical composition and hazard data for Nalco 93033 (an aqueous amine solution) as understood from historical Safety Data Sheets (SDS) and manufacturer guidelines.

IMPORTANT: This document is for informational and educational purposes only. It is not an official legal Safety Data Sheet and should not be used as a substitute for the official document provided by Nalco (an Ecolab Company). For workplace safety, compliance, or emergency response, you must obtain the specific, official SDS from the manufacturer or your employer’s database.

NALCO 93033 is non-flammable (Flash point > 200°F / 93°C, Pensky-Martens closed cup).

The 2021 MSDS introduced a "mandatory PPE Zone" graphic.

| Exposure Route | Control / PPE Specification | | :--- | :--- | | Respiratory | If ventilation inadequate: Half-face respirator with N95 (dust/mist) or R100 cartridges. For vapor/mist: Organic vapor cartridge with particulate pre-filter. | | Hands | Nitrile rubber (minimum thickness 0.11 mm, > 8 hours breakthrough). Do not use latex or vinyl. | | Eyes | Chemical splash goggles (ANSI Z87.1). Face shield (8-inch minimum) optional but recommended for drumming operations. | | Skin/Body | Neoprene or PVC apron; rubber boots. Eyewash stations and safety showers must be within 10 seconds of handling area. |

NALCO 93033 MSDS 2021 Report

Introduction

NALCO 93033 is a chemical product manufactured by Ecolab, a leading provider of water, hygiene, and infection prevention solutions. The Material Safety Data Sheet (MSDS) for NALCO 93033 provides critical information on the safe handling, use, storage, and disposal of this chemical product. This report summarizes the key points from the NALCO 93033 MSDS 2021.

Product Identification

Hazards Identification

Composition/Information on Ingredients

  • Non-active Ingredients: Water, proprietary additives.

    • First Aid Measures

    Fire-Fighting Measures

    Accidental Release Measures

    Handling and Storage

    Exposure Controls/Personal Protection

    Physical and Chemical Properties

    Stability and Reactivity

    Toxicological Information

    Ecological Information

    Disposal Considerations

    Transport Information

    Regulatory Information

    Other Information

    This draft report provides a general overview of the NALCO 93033 MSDS 2021. It is essential to consult the actual MSDS document for detailed information and to ensure compliance with all relevant regulations and guidelines.

    Nalco 93033 Safety Data Sheet (SDS) from 2021 provides essential safety and handling information for this specialized cooling water additive

    . It is primarily used as a corrosion inhibitor for industrial cooling systems, specifically those containing components. Key Product Details Primary Function

    : Corrosion inhibitor for engine and cooling water treatment. NSF Registration

    : Acceptable for treating boilers and cooling systems in food processing areas, provided there is no contact with edible products (Category G7). Shelf Life : Typically if stored at a maximum temperature of 25°C. Safety & Hazard Overview ⚠️

    While the exact 2021 formulation classification can vary by region, Nalco cooling additives generally carry the following precautions: Contact Risks : Can cause moderate irritation to Inhalation

    : High concentrations of vapor or mist may cause nausea, dizziness, or unconsciousness. Personal Protection (PPE) : Chemical splash goggles are typically required.

    : Chemical-resistant gloves and standard protective clothing. Respiratory

    : Usually not needed with good ventilation, but a respirator is recommended if significant mists are generated. files.dep.state.pa.us Storage and Handling Storage Groups : Classified in

    (Engine and cooling water treatment); should be stored away from acids (Group C) and oxygen scavengers (Group B). Temperature : Keep below 25°C to maintain stability.

    : Product should not enter sewage water or drainage ditches undiluted. It may meet hazardous waste criteria under RCRA depending on local regulations. How to Access the Full Document

    Ecolab (Nalco Water) does not always provide full SDS documents for public download due to proprietary formulations. You can obtain the official 2021 version through: Nalco 93033 Chemical Treatment Overview | PDF - Scribd

    Safety Data Sheets (SDS), formerly known as Material Safety Data Sheets (MSDS), for Nalco 93033 provide essential safety, handling, and regulatory information for this water treatment additive. Nalco Water, an Ecolab company, typically manages these documents through restricted portals, requiring direct requests for the most current versions. Product Overview & Identification Product Name: Nalco 93033. Manufacturer: Nalco Company (Ecolab).

    Primary Use: A cooling water additive and engine treatment used in industrial and food-processing environments (NSF G7 category: acceptable for treating cooling systems where treated water does not contact edible products). Hazard Identification & Safety

    While specific hazard classifications can update, general safety profiles for Nalco cooling treatments include:

    Health Hazards: Potential for moderate skin and eye irritation. Avoid prolonged or repeated breathing of vapors.

    Emergency Contact: In case of a spill or accident, contact the CHEMTREC emergency line at (800) 424-9300.

    Personal Protection: Standard recommendations include using safety goggles, chemical-resistant gloves (e.g., nitrile), and ensuring adequate ventilation during use. Handling and Storage Safety Data Sheets - SDS - MSDS - Ecolab

    Note: NALCO 93033 is typically a water treatment chemical (often a coagulant or flocculant). As of recent regulatory shifts (GHS), many "MSDS" documents are now called "SDS" (Safety Data Sheets). This post addresses that transition while focusing on the 2021 data.

    NALCO Water (an Ecolab company) no longer hosts generic public PDFs for legacy MSDS files due to liability and regional regulatory differences (OSHA, WHMIS, REACH).

    To get the exact 2021 version for your region:

    Pro Tip: If you cannot find the 2021 version, request a copy via their regulatory affairs email. Do not use a 2018 or earlier MSDS for a 2021 batch.

    Unlike older MSDS versions that suggested "milk or water" for ingestion, the 2021 NALCO 93033 MSDS strictly aligns with medical consensus: