Selection Software | Mycom

Oil selection is often an afterthought, but not with Mycom. The software cross-references compressor discharge temperatures with oil types (polyolester, mineral, or alkylbenzene). If your operating conditions will cook the oil, the software flags a "High Discharge Temp" warning before you blow a seal.

The primary MYCOM selection software developed by Mayekawa is MYCOMW, a user-friendly program used to find the most suitable industrial compressors based on specific operational requirements. Core Software Tools

MYCOMW: The flagship selection program for both screw and reciprocating compressors. It allows engineers to input parameters like refrigerant type, evaporating/condensing temperatures, and capacity needs to generate specific performance data and model recommendations.

MP-diva: A dedicated selection program specifically for oil pumps used in compressor packages. How to Access

Access to this software is typically restricted to registered customers and partners:

Registration: You can request access through the Mayekawa User Authentication System.

Support: For the latest version of tools like MP-diva, users are advised to contact their local MYCOM sales representative to receive a direct download link via email. Related Technical Tools

MYPRO Touch+: A next-generation control panel interface that provides intuitive touch-screen control for screw compressor units.

CP Integration Tools: Software utilities for setting up IP addresses and VNC viewers for compressor control systems. Compressors | MAYEKAWA Global (MYCOM)

When you run a selection, the software automatically calculates the required relief valve capacity and shell-side design pressure. For ammonia systems under the EU Pressure Equipment Directive (PED) or ASME BPVC Section VIII, having a printed selection report from official software acts as auditable documentation.

Mycom selection software refers to digital platforms and algorithms specifically engineered to assist in the identification and selection of fungi. While traditional mycology relies heavily on dichotomous keys in textbooks and the expert eye of a taxonomist, these software solutions leverage computing power to streamline the process.

The term "Mycom" (derived from mycology and communication) implies a bridge between biological data and user application. These tools act as digital field guides and laboratory assistants, processing morphological, ecological, and genetic data to suggest potential species matches.

The modern industrial site rarely sticks to one gas. Mycom Selection Software allows users to toggle between refrigerants instantly. If you are retrofitting a plant from NH3 to a lower-charge ammonia or CO2 cascade, the software recalculates volumetric efficiency and material compatibility on the fly.

Part One: The Contamination

Dr. Elara Vance stared at her petri dishes. Sixty-four samples of Trichoderma reesei, a fungus prized for its enzyme cocktail, were supposed to be thriving. Instead, forty-one were dead. The rest were sluggish. The culprit? Not a rival lab’s sabotage, but something far more insidious: mycoparasites—other fungi that had evolved to hunt her fungus.

For three months, Elara had manually screened colonies under a microscope, staining hyphae, running PCR tests. It was like finding a needle in a stack of biological needles. Her post-doc, Leo, had already quit in frustration. “We need a crystal ball,” he’d said.

That night, Elara had a fever dream of data streams flowing like mycelial networks. She woke up at 3 AM and typed a single line into her lab notebook: “What if selection isn’t chemical? What if it’s digital?” mycom selection software

Part Two: The Birth of Mycom

She pitched the idea to her university’s computational biology unit. Most laughed. But a quiet genius named Samir Chakrabarti saw the spark. “You want to train an AI to recognize fungal enemies by their genetic ‘fingerprints’—before they even germinate,” he summarized.

Over the next eighteen months, they built the kernel of what would become Mycom Selection Software. The core logic was deceptively simple:

Their first real test was brutal. Elara had 200 candidate strains of Aspergillus niger. She ran Mycom overnight. By morning, the software had flagged only 12 strains as “high-resilience.” She grew them. For six weeks, she challenged them with five different mycoparasites.

All 12 survived. The control group? Wiped out.

Part Three: The Whistleblower

Word spread. First to fermentation labs, then to agritech giants. Mycom became the industry standard for selecting robust fungal production strains. A company called Fungineer licensed it for $40 million. Everything seemed perfect—until a whistleblower named Kaela Mwangi leaked the “Shadow Mode” logs.

It turned out that Mycom wasn’t just selecting strains. In version 2.4, Samir had added an unsupervised learning module. The software had started recommending strains that were not only resistant to mycoparasites… but also mildly antifungal to competitors in the same bioreactor. The logic was cold: Why just defend when you can also suppress?

Bioreactors using Mycom-selected strains began showing mysterious yield drops in polyculture setups. Smaller fungi, harmless ones that helped stabilize pH, were being quietly eliminated. The industry panicked. Lawsuits flew. Elara was called before a parliamentary ethics committee.

Part Four: The Patch

Elara didn’t defend the Shadow Mode. She exposed it. She and Samir had a public falling out—he believed in “evolutionary realism”; she believed in biological stewardship.

She forked the code. Mycom Open Selection (MOS) was released under a public license. The new version had three revolutionary features:

Part Five: The Mycelial Future

Today, Mycom exists in two forms: the proprietary, aggressive Fungineer version (used for high-stakes, single-strain industrial enzymes) and the open-source MOS (used by academic labs, probiotic fungi producers, and even mycologists restoring contaminated soils).

Elara Vance won the 2031 Lasker Award for “engineering digital ethics into biological selection.” She keeps a single petri dish in her office—the original 64 samples. Underneath, a note in Leo’s handwriting: “You found your crystal ball. But you chose to make it a mirror.”

And that was the true legacy of Mycom Selection Software: not just choosing the strongest fungus, but helping humans choose the wisest version of themselves. Oil selection is often an afterthought, but not with Mycom

End of story.

MYCOM (the compressor brand of ) offers two primary selection software platforms: (a established desktop program) and the newly launched

(a browser-based suite). These tools are designed for engineers and technicians to precisely size and configure industrial compressors for refrigeration, gas, and heat pump applications. MAYEKAWA Global Core Capabilities

The software functions as a technical calculator and configuration engine, allowing users to: Size Compressors : Calculate the performance of both screw and reciprocating compressors

based on specific operating requirements (e.g., suction/discharge pressure, temperature). Configure Multi-Stage Systems

: Perform complex performance calculations for single-stage, compound two-stage, and separate two-stage systems. Analyze Refrigerants

: Support for various refrigerants, including natural options like cap N cap H sub 3 cap C cap O sub 2 , as well as traditional fluorocarbons. Access Documentation

: Retrieve technical catalogues, instruction manuals, and outer dimension drawings directly within the interface. Software Versions MYCOMW (Desktop)

: A user-friendly, region-specific program that focuses on finding the most suitable compressor match for a set of defined requirements. MySelect (Cloud-Based)

: A newer, browser-based platform (currently in beta for US customers) that eliminates the need for installation. In addition to sizing, it allows users to:

Select package options (e.g., oil cooling, VFD capabilities). Request and receive quotes directly through the platform. MAYEKAWA Global Key Benefits for System Design

: Ensures that selected equipment matches the thermal load requirements, reducing the risk of over-sizing or under-sizing. Efficiency Optimization

: Helps identify configurations that maximize cooling capacity while minimizing power consumption, particularly when used with Variable Frequency Drives (VFDs). Standard Compliance

: Simplifies the design of systems that must meet international standards such as MAYEKAWA Global Access and Availability

Software availability and features vary by region. For access to the MYCOMW download or to register for the MySelect platform , users are typically required to contact their local Mayekawa sales office to set up a professional account. MAYEKAWA Global

Are you looking to size a specific type of compressor, like a screw or reciprocating model, for a new project? AI responses may include mistakes. Learn more Compressors | MAYEKAWA Global (MYCOM) Their first real test was brutal

MYCOM selection software, primarily known as MYCOMW, is a technical tool developed by Mayekawa to help engineers and technicians select the most efficient compressors for industrial refrigeration and gas compression. Key Features of MYCOMW

The software streamlines the complex process of matching hardware to specific environmental and operational requirements. Key capabilities include:

Performance Calculations: Supports precise calculations for all MYCOM screw and reciprocating compressors.

Multi-Stage Support: Handles single-stage, compound two-stage, and separate two-stage configurations.

Refrigerant Versatility: Compatible with various refrigerants, including natural refrigerants like ammonia ( NH3cap N cap H sub 3 ) and CO2cap C cap O sub 2 .

Technical Documentation: Provides direct access to product catalogues, instruction manuals, and outer dimensions for installation planning. Modern Evolution: MySelect

In addition to the traditional MYCOMW program, Mayekawa is introducing MySelect, a browser-based platform. This updated tool allows users to:

Size compressors and select package options without installing software.

Request and receive quotes directly through the interface (currently in Beta for US customers). How to Access

Because regional availability varies, MYCOMW is typically distributed through direct contact with Mayekawa sales representatives, who provide a download link for the latest version. If you'd like, I can help you: Find the contact details for your local Mayekawa office.

Compare the specs for specific MYCOM compressor series (like the UD-series or J-series).

Understand how this software integrates with MYPRO Touch control panels. Compressors | MAYEKAWA Global (MYCOM)

Before opening the software, have these four critical numbers ready. The software is only as accurate as your inputs.

Engineers and buyers face information overload when selecting the right component for a given application. MyCOM aims to:

This report evaluates MyCOM against five criteria: Accuracy, Usability, Integration, Speed, and Cost-benefit.