Motorola Gm160 Programming Software Best 🆕

The Motorola GM160 is a legacy mobile radio from the GM160/GM360/GM340 series, widely used in commercial and industrial settings. Due to the age of the hardware, programming these devices requires specific legacy software. This report identifies the Motorola Professional Radio Customer Programming Software (CPS) R06.12.02 (specifically the "GM360" package which covers the series) as the best and most reliable solution for programming the GM160.

The Motorola GM160 is a professional analog mobile two-way radio, part of Motorola’s GM series (GM140, GM160, GM360, etc.). It’s widely used in:

To change frequencies, squelch settings, signaling (e.g., CTCSS, DCS), or power levels, you must use Motorola’s proprietary programming software – there’s no front-panel frequency entry. motorola gm160 programming software best

| Component | Best Recommendation | | :--- | :--- | | Software | Motorola CPS R01.12 (HVN9025) | | OS | Windows XP (Native) or 7 (32-bit) | | Cable | RIB-less USB cable (Prolific PL2303 or FTDI) | | Driver | Driver version 3.2.0.0 (for legacy stability) | | Backup Tool | Save codeplug before every edit |

Before downloading anything, you must understand the evolution of Motorola software. The GM160 sits right on the generational divide. The Motorola GM160 is a legacy mobile radio

The GM160 uses RSS, not CPS. This is the number one mistake users make. If you try to force the GM160 with the "Professional Series CPS" (designed for the GM340/380), the software will either crash or fail to recognize the radio.

To save you hours of frustration, do not attempt these: The Motorola GM160 is a professional analog mobile

The definitive software for the GM160 is:

Software Name: Motorola Professional Radio CPS (Customer Programming Software) Recommended Version: R06.12.02 (often labelled specifically as GM360/GM160 CPS).

Later versions of Motorola software (v6.x or v7.x) are designed for the Waris series (CDM750, GM360). The GM160 uses a different microcontroller. Using the wrong software can corrupt the codeplug, turning your radio into an expensive paperweight.

| Problem | Likely Solution | |---------|----------------| | “Communication failed” | Wrong COM port / driver / cable defective | | “Codeplug too new” | Need older or newer CPS version – GM160 uses specific version ranges | | Radio dead after write | Recover using original saved codeplug + full write | | Software won’t install on Windows 10/11 | Use Windows XP Mode or VirtualBox with XP |