Manual Controle Universal Articco Th-msur-40 -
| Parameter | Value | |--------------------|------------------------------| | Model | TH-MSUR-40 | | Control Type | Fully manual (no electronics)| | Input Required | Operator torque / force only | | Output Interface | Universal 6‑pin terminal or mechanical coupler | | Max Torque (rotary)| 40 Nm (hence “40” in model) | | Max Force (linear) | 2,500 N | | Operating Angle | 0–90° (rotary); 0–100 mm (linear with adapter) | | Enclosure Rating | IP54 (optional IP65) | | Ambient Temp | -20°C to +70°C | | Mounting | Bracket or panel mount (hardware included) |
Use this if you have the device in hand but no manual.
Quick Reference Card: Articco TH-MSUR-40
| Symbol | Action | Result | | :--- | :--- | :--- | | Joystick ↑↓ | Tilt Up / Down | Camera moves vertically | | Joystick ←→ | Pan Left / Right | Camera moves horizontally | | Knob CW/CCW | Zoom Tele / Wide | Image gets closer/further | | Iris + / - | Open / Close Iris | Brightness adjustment | | Focus F/N | Far / Near | Manual focus override |
Factory Reset (If unresponsive):
Need the Real Manual? Since "Articco" is often a rebranded generic device (Chinese OEM), search for "TH-MSUR-40 user manual PDF" or look for the original OEM name on the circuit board inside (e.g., "Haiwei" or "Dnake").
Pros:
Cons:
Verdict: Yes, but only if you have the manual controle universal articco th-msur-40 saved on your phone. Without the code list or programming sequences, this remote is a paperweight. Save a digital copy immediately after purchase.
Solution: The Articco TH-MSUR-40 is a mode-based remote. You must press the TV button before pressing VOL +/- to control the TV, or press AUX to control the soundbar. The remote does not automatically switch. manual controle universal articco th-msur-40
Some versions of the Articco TH-MSUR-40 include a learning function for buttons that don't work.
The mount features three primary points of manual articulation, allowing installers to fine-tune the camera’s line of sight without tools (in most cases) after initial setup.
| Adjustment Axis | Movement Range | Manual Control Method | | :--- | :--- | :--- | | Pan (Horizontal Rotation) | 360° continuous | Loosen side locking screw; rotate base plate freely. | | Tilt (Vertical Angle) | 0° to 90° (or 180°, depending on model variant) | Loosen friction hinge knob; angle the camera pendant. | | Horizontal Leveling | ±5° to ±10° corrective tilt | Rotate the inner gimbal ball joint (if present) or use shims. |
Please check the physical ports on your device:
You can pair the remote with your device using three main methods: Auto Code Search (Recommended) Ensure your air conditioner is plugged in (Standby mode). Point the remote directly at the AC unit.
Press and hold the SELECT or SET button for approximately 5 seconds until the code numbers on the screen begin to flash and increase automatically.
As soon as your AC unit beeps or turns on, press any key (like OK or ENTER) to stop the search and save the code.
Test the buttons. If they don't work correctly, repeat the process to find a more compatible code. Direct Code Entry
Find your brand's code on the back of the remote or in the provided code list. Press the SELECT button. Enter the 4-digit code using the number buttons. Need the Real Manual
Press OK or SET to confirm. The LCD should display "OK" or stop flashing. Manual Brand Search
If the brand is unknown, press SELECT until the screen flashes.
Use the TEMP + or TEMP - buttons to manually cycle through codes. When the unit reacts (beeps), press OK. Key Functions & Features
iCool / iHeat: These dedicated buttons automatically set the unit to a pre-configured cooling or heating mode for immediate comfort.
Timer Function: Press the TIMER button and use UP/DOWN arrows to set an auto-off or auto-on duration (typically between 1 to 15 hours).
Backlight: Press the LIGHT button to illuminate the LCD screen and buttons for 10 seconds, useful for nighttime use.
Child Lock: Press and hold the LOCK button for 3 seconds to prevent accidental setting changes. Repeat to unlock.
Swing Control: Separate buttons allow for manual positioning or automatic oscillation of the AC vents. Common Brand Codes
While the full list contains thousands of entries, here are a few common starting codes: Gree: 0309–0316 Midea: 0260–0265 Haier: 0266–0272 Goldstar/LG: 0201 Cons :
Pro Tip: Once you find the working code, write it down inside the battery compartment cover so you don't lose it when changing batteries.
What is the brand of the air conditioner you are trying to pair so I can provide the specific code range? Manual Controle Universal Articco Th Msur 40 - Facebook
You can configure the remote using either manual input or an automatic search function. 1. Manual Code Entry
Use this method if you have the 4-digit code for your specific device brand. Step 1: Turn on the device (AC, TV, etc.). Step 2: Hold SET until the screen flashes. Step 3: Choose the device mode (AC, TV, DVD, or AUD). Step 4: Hold OK until the screen shows "INPUT". Step 5: Enter the 4-digit code.
Step 6: If the screen shows "ERROR," try an alternative code. Step 7: Press OK to confirm. 2. Automatic Code Search Use this method if the brand code is unknown. Step 1: Turn on the device. Step 2: Hold SET until the screen flashes. Step 3: Select the device mode. Step 4: Hold OK until "SEARCH" appears.
Step 5: When the device responds (turns off or beeps), press any key to stop the search. Step 6: Note the code displayed, and press OK to save. Manual Controle Universal Articco Th Msur 40 - Facebook
If you have lost the physical manual, do not trust random image hosting sites. Use these legitimate sources:
Pro tip: Use the Google search string: "TH-MSUR-40" filetype:pdf to find direct PDF links.