Magic Pass 4300 User Manual

Unlike simple routers, the Magic Pass 4300 offers per-device bandwidth limiting:

To use the Magic Pass 4300 system, follow these steps:

Troubleshooting

  • Connect door lock relay output (if unit controls lock): COM, NO/NC to door strike.
  • Re-check wiring, restore power, and test.

    • Sector 0: FF FF FF FF FF FF
    Sector 1–15: FF FF FF FF FF FF (factory default)
    Key B often same as Key A.

    To change keys: Write to sector trailer (block 3 of each sector). magic pass 4300 user manual

    Configuration

    Before installing the Magic Pass 4300, ensure that: Unlike simple routers, the Magic Pass 4300 offers

    | LED | Color | Behavior | Meaning | |-----|-------|----------|---------| | Power | Blue | Solid | Device on | | Power | Blue | Blinking | Booting or firmware update | | Internet | Green | Solid | WAN link established | | Internet | Red | Solid | No ISP connection | | Wi-Fi 2.4G | Blue | Blinking | Data active | | LAN 1-3 | Green | Flashing | Wired device active |

    Troubleshooting: If the Power LED blinks for more than 5 minutes, the firmware is corrupted. See page 34 (Emergency Recovery). To use the Magic Pass 4300 system, follow these steps: