Infineon Memtool 4.9 -
Searching for “Infineon MEMTool 4.9” today leads to nostalgic forum posts, obscure FTP archives, and Stack Overflow epics. Yet, it remains in use because it does one thing perfectly: raw, unfiltered access to the silicon.
For a modern engineer, learning MEMTool 4.9 is akin to mastering a classic manual lathe—it teaches you exactly what happens when you hit “program.” While cloud-based IDEs and AI-driven debuggers rise, there is peace in the deterministic, offline, and brutally honest world of a 2010-era debugger.
Final recommendation: Keep a Windows 7 VM with MEMTool 4.9 and DAS 4.9 installed. That 20KB hex file for the XC164CS motor controller won’t flash itself – and when production stops, you’ll be the one holding the only tool that works.
Have a legacy production line relying on Infineon MEMTool 4.9? Share your war stories in the comments below. For those new to the tool, start with the XC800 Training Kit and a $10 MiniWiggler clone – it’s a debug education no simulator can provide.
Keywords used: Infineon MEMTool 4.9, XC800 debugging, XC2000 programmer, DAS server, legacy Infineon tools, automotive flash programming, MEMTool scripting.
Infineon MemTool 4.9 is a professional, free-of-charge software suite designed for programming, erasing, and managing on-chip FLASH and OTP memory on a wide array of Infineon microcontrollers. This version (including the 2021.08 release) offers a streamlined interface for developers working with both legacy and modern automotive and industrial architectures. Key Features of MemTool 4.9
MemTool provides a comprehensive toolkit for handling memory operations during the development and evaluation phases of a project.
On-Chip Memory Operations: Easily perform erase, program, verify, and protect functions on selectable flash sections or entire program/data areas.
File Format Support: Direct support for opening and writing Intel-Hex files into target memory devices.
Ready-to-Use Configurations: Includes pre-configured files for the full range of Infineon Evaluation Boards and application kits.
Connectivity Options: Supports various hardware interfaces, including standard RS232, USB-to-target via UART/DAS, and high-speed DAP or JTAG connections using the Infineon miniWiggler.
Batch Command Support: For automated testing or high-volume workflows, MemTool 4.9 supports command-line scripts to automate sequences like file loading and programming. Supported Microcontroller Families
MemTool 4.9 maintains broad compatibility across multiple Infineon MCU families: AURIX™ / TriCore™: (TC3xx, TC2xx, and TC17xx families) XMC™: Industrial 32-bit MCUs (XMC4000 and XMC1000)
XC Families: Legacy 8-bit and 16-bit architectures (XC800, XC16x, XC2000, and XE166) Installation and Usage Guide
To get started with Infineon MemTool 4.9, follow these steps: Infineon Flash Programmer Memtool for XMC1000 family
Infineon MemTool 4.9 is a free, Windows-based software tool used for on-chip flash programming
. It is specifically designed to handle FLASH and OTP (One-Time Programmable) memory devices across various Infineon microcontroller families. Key Features Core Functions
: Erase, program, verify, and protect selectable flash sections or the entire memory area. Programming Method : Supports opening Intel-Hex files
and writing their contents (fully or partially) to target devices. Pre-Configured Files
: Provides ready-to-use configuration files for the full range of Infineon evaluation boards and application kits. Batch Command Support : Allows for basic automation via batch commands (e.g., connect, open_file, select_all_sections, program). Supported Hardware & Connections Microcontroller Families : AURIX™/TriCore™, XMC1000, XMC4000. : XC800, XC16x, XC2000. Connectivity (UART) ports. JTAG and DAP communication via the Infineon Devices Access Server (DAS) Hardware Adapters : Onboard wigglers for evaluation kits or the external miniWiggler for custom boards. System Requirements Operating System : Microsoft Windows 10 (64-bit) or newer. Permissions : Administrator privileges are required for installation. Software Bundles : Version 4.9 typically includes Infineon DAS V7.3.7 to handle target communications. Usage Limitations : Officially intended for evaluation purposes only, rather than mass production. Availability : While free from the Infineon Software Tools infineon memtool 4.9
portal, it has limited script access compared to premium tools from partners like PLS. If you'd like, I can help you with: Troubleshooting connection errors (e.g., "Can't connect to target") Writing a specific batch script for your hex file Finding the latest version for a specific microcontroller series Infineon Memtool
Introduction
Infineon Technologies, a leading semiconductor company, has developed a range of innovative tools to support the development and production of its semiconductor products. One such tool is MEMTool, a software suite designed to facilitate the development and debugging of Infineon's microcontroller and memory products. This essay provides an overview of MEMTool 4.9, its features, and benefits.
Overview of MEMTool 4.9
MEMTool 4.9 is the latest version of Infineon's MEMTool software suite. It is a powerful development tool that enables engineers to design, test, and debug Infineon's microcontroller and memory products. The software provides a comprehensive set of features and functions to support the development process, from initial design to final product testing.
Key Features of MEMTool 4.9
MEMTool 4.9 offers a range of key features that make it an essential tool for engineers working with Infineon's semiconductor products. Some of the main features include:
Benefits of MEMTool 4.9
The benefits of using MEMTool 4.9 are numerous. Some of the main advantages include:
Conclusion
In conclusion, Infineon MEMTool 4.9 is a powerful software suite that provides a comprehensive set of tools for designing, testing, and debugging Infineon microcontroller and memory products. With its range of key features, including flash programming, debugging, and memory analysis, MEMTool 4.9 is an essential tool for engineers working with Infineon semiconductor products. The benefits of using MEMTool 4.9, including improved productivity, increased reliability, and enhanced debugging capabilities, make it a valuable asset for any development team working with Infineon devices.
Infineon Memtool 4.9 is a 64-bit Windows software used for erasing, programming, and verifying on-chip flash memory on Infineon microcontrollers. It is primarily used with families like AURIX/TriCore, XMC, and XC2000. 1. Installation and Requirements System: Windows 10 or newer (64-bit strictly). Permissions: You must have administrator rights to install.
Included Components: The package typically includes the Infineon Device Access Server (DAS) v7.3.7, which is essential for hardware communication. 2. Setting Up Hardware Connection
Depending on your target device, you will use one of these common interfaces:
miniWiggler: Recommended for custom boards using DAP or JTAG connections.
Bootstrap Loader (BSL): Used for UART/serial flashing (typically via a COM port).
DAS JDS COM: Often used for TriBoards when connecting over USB. 3. Basic Programming Workflow To flash a device, follow these core steps: Configure Target: Navigate to Target > Change.
Select New and choose your device from the list (e.g., "TriCore Aurix > Starter Kits").
Select the appropriate configuration file (e.g., TriBoard with TC39x (BSL/ASC)). Setup Interface: Go to Target > Setup. Searching for “ Infineon MEMTool 4
Under Access Device, select the correct COM port or DAS server. Connect and Flash:
Click Connect. You should see a "Ready for Memtool command" message. Click Open File and select your .hex or .srec file.
Click Select All followed by Add Sel. to queue the memory banks. Click Program All. 4. Advanced Operations
User Configuration Blocks (UCB): Memtool 4.9 can program UCBs, but be extremely careful; modifying UCBs can permanently lock your device if done incorrectly.
Inactive Bank Flashing: Version 4.9 does not support flashing with a direct offset. You must manually calculate the offset and update your linker script before generating the binary. 5. Troubleshooting Common Errors
"Can't establish Connection": Often caused by incorrect Boot Mode header (BMI) settings or HWCFG pin configurations. Ensure your board's DIP switches are set to the correct mode (e.g., Generic Bootstrap).
"Access is Denied": Frequently occurs after Windows USB driver updates. Ensure the COM port isn't being used by another application like a terminal emulator. Flash inactive bank - Infineon Developer Community
Infineon Memtool 4.9 is a free, Windows-based software utility designed for on-chip flash programming of various Infineon microcontroller families. It is primarily used for evaluation and development purposes, allowing users to erase, program, and verify flash memory. Core Capabilities
Memtool 4.9 supports a range of memory operations for on-chip FLASH and OTP (One-Time Programmable) devices: Flash Operations
: Erase entire modules or specific sectors, program files, and verify contents. File Support : Load and program standard Motorola S-Record Protection Management : Set or reset chip and sector protection. Special Configurations BMI (Boot Mode Index) UCB (User Configuration Blocks) for specific device families. Supported Device Families
Memtool 4.9 is designed to handle the following Infineon microcontrollers: AURIX™ / TriCore™ (TC2xx, TC3xx, and preliminary support for TC49x) (XMC1000 and XMC4000 series) XC800, XC16x, XC2000 Connectivity & Interface Support
The tool communicates with target hardware through several standard interfaces: UART (ASC) Bootstrap Loader
: Supported for families like XMC1000, XMC4000, and TriCore. Infineon DAS (Device Access Server)
: Required for JTAG and DAP communication, typically used with the Infineon miniWiggler Standard RS232 : For traditional serial connections. Quick Setup Guide To use Memtool 4.9, follow these general steps: Infineon Memtool - tutorial 11 May 2022 Nikola Sever Infineon Memtool
Infineon MemTool 4.9 (also known as Infineon On-Chip Memory Programming Tool or IMT) is a specialized software utility for Windows 10 and newer, designed to program, erase, verify, and protect on-chip FLASH and OTP memory on specific Infineon microcontroller families. Supported Microcontroller Families
The tool is compatible with a wide range of Infineon MCU devices, including: AURIX™/TriCore™: TC2xx and TC3xx. XMC™ Series: XMC1000 and XMC4000. Legacy Families: XC800, XC16x, and XC2000. Key Features and Functionality
Memory Operations: Users can erase, program, and verify either selectable flash sections or the entire program and data flash areas.
File Support: Primarily uses Intel-Hex-Files for writing content to the target device.
Configuration: Comes with ready-to-use configuration files for Infineon evaluation boards and application kits. Have a legacy production line relying on Infineon MEMTool 4
Automation: Supports a limited set of batch commands to automate tasks like connecting to a board and programming a device. Connectivity and Interface Options
The tool connects the host PC to the target hardware via several standard interfaces:
Hardware Interface: Use the Infineon miniWiggler for DAP and JTAG connections.
Connection Modes: Supports Bootstrap Loader (ASC BSL) mode and Debug Interface (SWD/SPD) mode.
PC Ports: Standard RS232 (UART) or USB-to-target via Direct Attached Storage (DAS). Important Considerations
Usage Policy: Official documentation notes that MemTool is intended for evaluation purposes only and not for high-volume production programming.
Availability: It is available as a free-of-charge download from Infineon's official developer portals.
Here’s how a typical session looks:
The entire 2 MB flash takes ~12 seconds over JTAG at 10 MHz. That’s perfectly acceptable for production.
Infineon Memtool 4.9 represents a significant, albeit legacy, version of Infineon’s dedicated in-circuit flash programming software. Designed primarily for engineers working with Infineon’s 16-bit XC2000, XE166 families, and certain legacy 32-bit TriCore-based microcontrollers (such as the TC11xx, TC17xx, and TC23xx series), Memtool 4.9 provides a lightweight, no-frills solution for flashing, erasing, and verifying device memory.
Unlike modern universal programmers or debuggers that bundle flashing as a secondary function, Memtool 4.9 is purpose-built. Its key features include:
Why 4.9 Matters: This version is often cited in application notes and forum discussions as the last release before Infineon pivoted to Memtool 2021 (based on a newer architecture with DAS 8.0+). Many engineers keep Memtool 4.9 on legacy Windows 7/XP machines because it is stable, lightweight (<20 MB), and does not require a full IDE license.
Limitations: Memtool 4.9 is not intended for debugging, real-time variable monitoring, or support for modern AURIX™ TC2xx/TC3xx devices. It also lacks native integration with Eclipse-based environments and may struggle with Windows 10/11 driver signatures for older parallel port or LPT dongles.
Use Case Example: A field service technician updating firmware on an industrial motor drive running an XE164FN-40F80L would connect via RS-232, launch Memtool 4.9, load the updated .hex file, click Program, and verify the checksum—all without installing a 2 GB IDE.
Conclusion: Infineon Memtool 4.9 is a reliable, focused tool for those maintaining older Infineon microcontroller-based products. While obsolete for new AURIX development, it remains a valuable utility in the embedded engineer’s toolkit for legacy system support and production floor programming of XC2000/XE166 devices.
Note: Memtool 4.9 does not support modern AURIX (TC2xx, TC3xx) families. For those, you need AURIX Flasher or Memtool 5.x.
Version 4.9 improved integration hooks with Lauterbach Trace32 debuggers, allowing MemTool to utilize high-end debug hardware for programming operations, which is often required in high-speed production environments.
The UI maintains a functional, tabbed layout. Key improvements in 4.9 include:
MemTool 4.9 significantly expanded the database of supported devices. It provides comprehensive support for: