Icom Ic-f310 Programming Software -

Even experienced techs hit roadblocks with the IC-F310. Here is the hit list:

| Error Code / Symptom | Likely Cause | Solution | | :--- | :--- | :--- | | Timeout (Check cable) | Wrong COM port or dead cable. | Verify COM port in Device Manager. Try a different USB port. | | Model Mismatch | You are using CS-F410 software on an F310 (or vice versa). | Uninstall and locate correct CS-F310 software. | | Checksum Error | Corrupt codeplug or faulty EEPROM. | Try writing a fresh default template from File > New. | | Windows crashes on write | Driver conflict with Prolific chip. | Uninstall driver. Use Driver Cleaner. Install version 3.2.0.0. | | Radio won’t power on after write | You changed the frequency range beyond hardware limits (136-174 MHz). | You must use a hardware jig or send to Icom service. | Icom Ic-f310 Programming Software

The official Icom cable for the IC-F310 is the OPC-1122U (USB version) or the older OPC-1122 (RS-232 serial, requiring a legacy COM port). Even experienced techs hit roadblocks with the IC-F310

The golden rule for the IC-F310: If you use an aftermarket cable, you must disable driver signature enforcement or manually roll back to Prolific Driver v3.2.0.0. The official Icom cable for the IC-F310 is

Now, edit the codeplug:

Menu > Key Assignment: Assign features to P0-P3 buttons.

Scan > Scan List 1: Add which channels are scanned.

Even experienced techs hit roadblocks with the IC-F310. Here is the hit list:

| Error Code / Symptom | Likely Cause | Solution | | :--- | :--- | :--- | | Timeout (Check cable) | Wrong COM port or dead cable. | Verify COM port in Device Manager. Try a different USB port. | | Model Mismatch | You are using CS-F410 software on an F310 (or vice versa). | Uninstall and locate correct CS-F310 software. | | Checksum Error | Corrupt codeplug or faulty EEPROM. | Try writing a fresh default template from File > New. | | Windows crashes on write | Driver conflict with Prolific chip. | Uninstall driver. Use Driver Cleaner. Install version 3.2.0.0. | | Radio won’t power on after write | You changed the frequency range beyond hardware limits (136-174 MHz). | You must use a hardware jig or send to Icom service. |

The official Icom cable for the IC-F310 is the OPC-1122U (USB version) or the older OPC-1122 (RS-232 serial, requiring a legacy COM port).

The golden rule for the IC-F310: If you use an aftermarket cable, you must disable driver signature enforcement or manually roll back to Prolific Driver v3.2.0.0.

Now, edit the codeplug:

Menu > Key Assignment: Assign features to P0-P3 buttons.

Scan > Scan List 1: Add which channels are scanned.