Huawei E5573cs322 Driver For Windows 10

Once the "driver" is installed, you will have the Huawei Mobile WiFi Dashboard (or "HiLink") on your PC.

This device uses Huawei’s HiLink technology. Here is the technical breakdown of what happens when you plug it into a Windows 10 PC:

The Verdict: You do not need to download a driver. The driver is physically stored inside the modem's memory.

Installing the Huawei E5573CS322 driver for Windows 10 does not need to be a nightmare. In 90% of cases, the solution is one of three things:

And remember: If all else fails, simply use the device as a wireless hotspot. The E5573CS322 was designed to serve Wi-Fi first—USB is just a bonus. However, with the detailed steps and troubleshooting methods outlined in this guide, you should have that USB tethering up and running in under 15 minutes.

Final tip: After successfully installing the driver, create a System Restore point. That way, if a future Windows Update breaks your driver, you can restore instantly without repeating the entire process.

Do you have a unique issue with your E5573CS322 not covered here? Check the Device Manager for error codes (e.g., Code 10, Code 31, Code 43) and search for that specific code combined with "Huawei NDIS". Good luck!

on Windows 10, covering installation, troubleshooting, and common pitfalls. 1. The Standard USB Installation huawei e5573cs322 driver for windows 10

Most of the time, the Huawei E5573Cs-322 is designed to be "Plug and Play." When you connect it to your PC via a high-quality USB cable, Windows 10 should ideally recognize it as a remote NDIS network device. Internal Driver Installer

: Often, when you first plug in the device, it appears as a Virtual CD-ROM in "This PC." Open that drive and run the AutoRun.exe to install the basic management software and drivers. HUAWEI PC Manager : If the automatic setup doesn't trigger, you can use the HUAWEI PC Manager to scan and update drivers automatically. HUAWEI Global 2. Manual Driver Installation for "Modem Not Found" Errors

If Windows recognizes the device but third-party tools (like DC-Unlocker) can't find it, you likely need the specific Huawei Mobile USB Drivers Download & Extract : Obtain a verified driver package like the HUAWEI Mobile Broadband Drivers Huawei_Mobile_Driver_v1.0.exe (or similar), right-click, and Run as Administrator Device Manager Check Right-click the icon and select Device Manager

Look for "Ports (COM & LPT)" or "Network adapters." You should see "Huawei Mobile Connect" entries without yellow warning triangles. 3. Solving the "No Internet" USB Tethering Issue

Sometimes you can see the device, but you still can't browse the web. DNS Settings

: Windows might struggle with the device's default DNS. You can manually set your DNS to Google (8.8.8.8) or Cloudflare (1.1.1.1) in the Network and Sharing Center Web UI Access : If tethered, try navigating to 192.168.8.1

in your browser. This is the default IP address to manage your E5573Cs-322 settings, where you can check if the SIM is actually connected to the 4G network. Once the "driver" is installed, you will have

You're looking for the Huawei E5573CS-322 driver for Windows 10. Here are some steps to help you find and install the driver:

Method 1: Download from Huawei's Official Website

Method 2: Use the Huawei Mobile Broadband Driver Package

Method 3: Use Windows Update

Installation Steps

Verify Driver Installation

The E5573Cs-322 contains a small flash memory chip that simulates a CD-ROM drive when first plugged into a PC. This device uses Huawei’s HiLink technology

  • Deployment: The utility installs the Huawei Driver Package and the Huawei Mobile Partner or HiLink dashboard software.
  • Completion: The virtual CD-ROM drive disappears, indicating the device has switched modes from "Storage" to "Modem/Network Adapter."

    • Here is the most reliable method to get the Huawei E5573Cs-322 working via USB tethering on Windows 10.

    The Huawei E5573Cs-322 is a popular 4G LTE Mobile Wi-Fi hotspot capable of providing internet connectivity via cellular networks. While the device functions natively as a Wi-Fi hotspot, direct USB tethering to a Windows 10 workstation offers lower latency, faster data transfer rates, and device charging simultaneously.

    Windows 10, unlike its predecessors, includes a robust library of generic drivers for mobile devices. However, the E5573Cs-322 utilizes specific Huawei networking protocols that often require specific driver packages to function optimally, particularly for features like "HiLink" (virtual Ethernet emulation) versus standard tethering modes.

    Huawei designed the E5573Cs-322 primarily for mobile carriers (like T-Mobile, Vodafone, or AT&T). The official driver package is often bundled on the device’s virtual CD-ROM partition. However, on modern Windows 10 systems (especially 64-bit versions), you may face:

    The safest way is to let Windows Search for the driver, but you need to force it.

    Note: This does not install a "Huawei" driver but forces a working generic NDIS driver.