Despite being a small board, it retains basic expandability:
| Problem | Likely Cause | DIY Fix | |---------|--------------|---------| | No boot with new SSD | M.2 slot is NVMe-only, not SATA | Replace with NVMe drive | | Random shutoffs | VRM overheating (dusty AIO chassis) | Clean heatsink, repaste CPU, add thermal pads to MOSFETs | | Front USB ports dead | Blown fuse on board (near USB header) | Solder 2A polyfuse or use a USB hub | | Red/orange blinking power LED | RAM not seated fully (SODIMM loose) | Reseat with pressure until clips click | | No display but fans spin | Corrupted BIOS CMOS | Remove CMOS battery for 10 mins, then reboot |
The FXN1 utilizes the Intel H370 Chipset (or similar B360/Q370 variants depending on the specific BIOS revision). It is built for the LGA 1151 socket.
Summary
Key specifications (common across listings)
Performance and compatibility
Build, reliability, and serviceability
Pros
Cons
Buying advice (2021 / used‑market perspective)
Verdict A solid OEM motherboard for maintaining older HP business desktops—dependable for office use and repairs, but obsolete for modern performance or upgrade flexibility. Buy as a replacement/repair part; avoid as the foundation for a new long‑term custom build.
If you want, I can:
The HP FXN1 E93839 Go to product viewer dialog for this item.
motherboard (often identified by part number 611834-001) is a proprietary unit primarily designed for legacy HP business desktops, such as the HP Compaq Elite 8200 and 8300 series. Core Technical Specifications
The primary variant of this board is built on the Intel Q77 or Q67 Express chipset to support professional environments.
Form Factor: Proprietary "Modified ATX" (specifically designed for HP SFF or CMT chassis). CPU Socket: LGA 1155 (Socket H2).
Supported Processors: Intel 2nd and 3rd Generation Core i3, i5, and i7 processors (e.g., i5-2400, i7-3770). Memory (RAM): Type: DDR3 SDRAM (non-ECC). Capacity: Up to 32 GB total across 4 DIMM slots.
Speed: Supports up to 1333 MHz or 1600 MHz depending on the specific CPU used. Expansion Slots: 1 x PCI Express x16 (for graphics). 1 x PCI Express x1. Up to 2 x Legacy PCI slots (on CMT versions).
Storage: 4 x SATA ports (supporting SATA II and SATA III speeds). Integrated Features and I/O
Graphics: Integrated Intel HD Graphics (dependent on CPU model, such as HD 2000/3000 or HD 2500/4000). Audio: Integrated Realtek high-definition audio.
Networking: Integrated Intel Gigabit Network Connection (10/100/1000 Mb/s). Rear Ports:
6 to 10 USB ports (mix of USB 2.0 and USB 3.0 depending on revision). 1 x DisplayPort. 1 x VGA port. 1 x Serial (RS-232) port. PS/2 ports for keyboard and mouse. Note on Newer Revisions (2021 context) HP Desktop PCs - Motherboard Specifications, Row
HP FXN1 E93839 Go to product viewer dialog for this item. is a proprietary motherboard primarily designed for business-class desktop systems such as the HP Compaq 8200 Elite SFF. In 2021, it remained a common component in the secondary market for budget-conscious users looking to maintain or lightly upgrade legacy office hardware. Because "E93839" is a regulatory number used across several generations of HP boards, specifications can vary depending on the specific system it was pulled from. Core Technical Specifications
The most widely documented version of this board, found in the 8200 Elite series, features the following:
Socket and CPU: It typically utilizes the LGA 1155 socket. It is compatible with 2nd generation Intel "Sandy Bridge" processors, such as the Intel Core i5-2400 or i7-2600.
Memory: The board includes four DIMM slots supporting DDR3 SDRAM.
Expansion: It usually provides a PCIe 2.0 x16 slot for discrete graphics, though upgrades are often limited by the Small Form Factor (SFF) chassis and low-wattage power supplies typical of these units.
Form Factor: This is a proprietary "modified" ATX or SFF design. It does not follow standard ATX mounting or power connector patterns, making it difficult to use in non-HP cases without significant modification. Variants and Discrepancies
There are later iterations listed under the same "E93839" label that support newer hardware, which can cause confusion:
DDR4 Version: Some listings for HP G3 models indicate an E93839 FXN1 variant that supports Intel 6th Gen (Skylake) CPUs like the i5-6500 and uses DDR4 memory.
I/O Ports: Standard ports across most versions include DisplayPort, VGA, USB 2.0, and Ethernet (RJ-45). 2021 Context and Usage
By 2021, these motherboards were largely relegated to "e-sport" starter builds or home office refurbishments. Users often paired them with low-profile GPUs like the GT 1030 or GTX 1050 Ti to create functional, entry-level gaming machines from discarded corporate hardware.
The HP FXN1 E93839 motherboard (often identified as HP part number 611834-001) is a proprietary component primarily designed for the HP Compaq 8200 Elite series. While it originated in 2011, it remains a popular subject for 2021-era "sleeper" PC builds and office upgrades due to its reliability. Core Specifications HP motherboard E93839 FXN1 With Intel I5-6500 - eBay
HP FXN1 E93839 is a proprietary motherboard primarily designed for the HP Compaq 8200 Elite
series. While it is an older component, it remains a popular choice for budget-friendly refurbishments and low-profile office builds due to its reliability and specific compatibility with Sandy Bridge architecture. Core Technical Specifications E93839 FXN1 Go to product viewer dialog for this item. is built on the Intel Q67 Express chipset , specifically optimized for business environments. Processor Socket: LGA 1155 (Socket H2) CPU Support:
Compatible with 2nd Generation Intel Core i3, i5, and i7 processors (Sandy Bridge). 4 DDR3 DIMM slots. Maximum Capacity: Supports up to of DDR3 RAM (8 GB per slot) on 64-bit systems. Officially supports up to 1333 MHz. Form Factor: Proprietary Small Form Factor (SFF) or MicroATX variant depending on the specific chassis. Integrated Intel HD Graphics 2000 (CPU dependent) with an available PCIe x16 expansion slot for dedicated low-profile GPUs. Connectivity and Interfaces
Despite its age, this board offers a robust array of standard business ports found on sites like Amazon.com.mx Quantity/Standard Video Output VGA, DVI, and DisplayPort Multiple USB 2.0 (standard for the 8200 Elite series) Networking Intel 82567LM Gigabit Ethernet (RJ-45) 4 SATA ports (SATA II/III depending on revision) PS/2 keyboard and mouse ports HD Audio with line-in, line-out, and microphone jacks Key Compatibility Note This motherboard is proprietary
. It uses non-standard power connectors and mounting holes specific to HP cases like the HP Compaq 8200 Elite SFF
. It cannot be easily installed into a standard aftermarket ATX or Micro-ATX computer case without significant modification. Are you looking to upgrade a specific component
on this board, like the CPU or RAM, or are you looking for a replacement Placa Madre | E93839 FXN1 | DDR3 | HP COMPAQ 8200 ELITE
Despite being a small board, it retains basic expandability:
| Problem | Likely Cause | DIY Fix | |---------|--------------|---------| | No boot with new SSD | M.2 slot is NVMe-only, not SATA | Replace with NVMe drive | | Random shutoffs | VRM overheating (dusty AIO chassis) | Clean heatsink, repaste CPU, add thermal pads to MOSFETs | | Front USB ports dead | Blown fuse on board (near USB header) | Solder 2A polyfuse or use a USB hub | | Red/orange blinking power LED | RAM not seated fully (SODIMM loose) | Reseat with pressure until clips click | | No display but fans spin | Corrupted BIOS CMOS | Remove CMOS battery for 10 mins, then reboot |
The FXN1 utilizes the Intel H370 Chipset (or similar B360/Q370 variants depending on the specific BIOS revision). It is built for the LGA 1151 socket.
Summary
Key specifications (common across listings)
Performance and compatibility
Build, reliability, and serviceability
Pros
Cons
Buying advice (2021 / used‑market perspective)
Verdict A solid OEM motherboard for maintaining older HP business desktops—dependable for office use and repairs, but obsolete for modern performance or upgrade flexibility. Buy as a replacement/repair part; avoid as the foundation for a new long‑term custom build. hp fxn1 e93839 motherboard specs 2021
If you want, I can:
The HP FXN1 E93839 Go to product viewer dialog for this item.
motherboard (often identified by part number 611834-001) is a proprietary unit primarily designed for legacy HP business desktops, such as the HP Compaq Elite 8200 and 8300 series. Core Technical Specifications
The primary variant of this board is built on the Intel Q77 or Q67 Express chipset to support professional environments.
Form Factor: Proprietary "Modified ATX" (specifically designed for HP SFF or CMT chassis). CPU Socket: LGA 1155 (Socket H2).
Supported Processors: Intel 2nd and 3rd Generation Core i3, i5, and i7 processors (e.g., i5-2400, i7-3770). Memory (RAM): Type: DDR3 SDRAM (non-ECC). Capacity: Up to 32 GB total across 4 DIMM slots.
Speed: Supports up to 1333 MHz or 1600 MHz depending on the specific CPU used. Expansion Slots: 1 x PCI Express x16 (for graphics). 1 x PCI Express x1. Up to 2 x Legacy PCI slots (on CMT versions).
Storage: 4 x SATA ports (supporting SATA II and SATA III speeds). Integrated Features and I/O
Graphics: Integrated Intel HD Graphics (dependent on CPU model, such as HD 2000/3000 or HD 2500/4000). Audio: Integrated Realtek high-definition audio.
Networking: Integrated Intel Gigabit Network Connection (10/100/1000 Mb/s). Rear Ports: Despite being a small board, it retains basic
6 to 10 USB ports (mix of USB 2.0 and USB 3.0 depending on revision). 1 x DisplayPort. 1 x VGA port. 1 x Serial (RS-232) port. PS/2 ports for keyboard and mouse. Note on Newer Revisions (2021 context) HP Desktop PCs - Motherboard Specifications, Row
HP FXN1 E93839 Go to product viewer dialog for this item. is a proprietary motherboard primarily designed for business-class desktop systems such as the HP Compaq 8200 Elite SFF. In 2021, it remained a common component in the secondary market for budget-conscious users looking to maintain or lightly upgrade legacy office hardware. Because "E93839" is a regulatory number used across several generations of HP boards, specifications can vary depending on the specific system it was pulled from. Core Technical Specifications
The most widely documented version of this board, found in the 8200 Elite series, features the following:
Socket and CPU: It typically utilizes the LGA 1155 socket. It is compatible with 2nd generation Intel "Sandy Bridge" processors, such as the Intel Core i5-2400 or i7-2600.
Memory: The board includes four DIMM slots supporting DDR3 SDRAM.
Expansion: It usually provides a PCIe 2.0 x16 slot for discrete graphics, though upgrades are often limited by the Small Form Factor (SFF) chassis and low-wattage power supplies typical of these units.
Form Factor: This is a proprietary "modified" ATX or SFF design. It does not follow standard ATX mounting or power connector patterns, making it difficult to use in non-HP cases without significant modification. Variants and Discrepancies
There are later iterations listed under the same "E93839" label that support newer hardware, which can cause confusion:
DDR4 Version: Some listings for HP G3 models indicate an E93839 FXN1 variant that supports Intel 6th Gen (Skylake) CPUs like the i5-6500 and uses DDR4 memory.
I/O Ports: Standard ports across most versions include DisplayPort, VGA, USB 2.0, and Ethernet (RJ-45). 2021 Context and Usage Key specifications (common across listings)
By 2021, these motherboards were largely relegated to "e-sport" starter builds or home office refurbishments. Users often paired them with low-profile GPUs like the GT 1030 or GTX 1050 Ti to create functional, entry-level gaming machines from discarded corporate hardware.
The HP FXN1 E93839 motherboard (often identified as HP part number 611834-001) is a proprietary component primarily designed for the HP Compaq 8200 Elite series. While it originated in 2011, it remains a popular subject for 2021-era "sleeper" PC builds and office upgrades due to its reliability. Core Specifications HP motherboard E93839 FXN1 With Intel I5-6500 - eBay
HP FXN1 E93839 is a proprietary motherboard primarily designed for the HP Compaq 8200 Elite
series. While it is an older component, it remains a popular choice for budget-friendly refurbishments and low-profile office builds due to its reliability and specific compatibility with Sandy Bridge architecture. Core Technical Specifications E93839 FXN1 Go to product viewer dialog for this item. is built on the Intel Q67 Express chipset , specifically optimized for business environments. Processor Socket: LGA 1155 (Socket H2) CPU Support:
Compatible with 2nd Generation Intel Core i3, i5, and i7 processors (Sandy Bridge). 4 DDR3 DIMM slots. Maximum Capacity: Supports up to of DDR3 RAM (8 GB per slot) on 64-bit systems. Officially supports up to 1333 MHz. Form Factor: Proprietary Small Form Factor (SFF) or MicroATX variant depending on the specific chassis. Integrated Intel HD Graphics 2000 (CPU dependent) with an available PCIe x16 expansion slot for dedicated low-profile GPUs. Connectivity and Interfaces
Despite its age, this board offers a robust array of standard business ports found on sites like Amazon.com.mx Quantity/Standard Video Output VGA, DVI, and DisplayPort Multiple USB 2.0 (standard for the 8200 Elite series) Networking Intel 82567LM Gigabit Ethernet (RJ-45) 4 SATA ports (SATA II/III depending on revision) PS/2 keyboard and mouse ports HD Audio with line-in, line-out, and microphone jacks Key Compatibility Note This motherboard is proprietary
. It uses non-standard power connectors and mounting holes specific to HP cases like the HP Compaq 8200 Elite SFF
. It cannot be easily installed into a standard aftermarket ATX or Micro-ATX computer case without significant modification. Are you looking to upgrade a specific component
on this board, like the CPU or RAM, or are you looking for a replacement Placa Madre | E93839 FXN1 | DDR3 | HP COMPAQ 8200 ELITE
