The HP 8767A-SMVB motherboard is a proprietary mainboard used in select Hewlett-Packard desktop/workstation systems. As the central printed circuit board in those machines, it integrates the processor socket, chipset, memory slots, I/O controllers, and expansion interfaces that together determine the system’s performance, upgradeability, and reliability. This essay examines the board’s design purpose, core components, typical features, maintenance and troubleshooting considerations, and its role in lifecycle and upgrade decisions.
Purpose and design
Core components and architecture
Firmware and software integration
Maintenance and troubleshooting
Upgrade and lifecycle considerations
Practical advice for owners and technicians
Conclusion The HP 8767A-SMVB motherboard exemplifies an OEM-focused design that prioritizes reliability, validated compatibility, and ease of service for a particular HP system family. Understanding its chipset, supported CPUs and memory, onboard interfaces, and firmware behavior is essential for effective maintenance, safe upgrades, and informed decisions about repair versus replacement.
The HP 8767 motherboard, commonly known by its HP internal name "Baker", is a customized board primarily used in HP Pavilion Gaming and Envy desktop series (e.g., TG01 and TE01 models). The suffix "-smvb-" typically refers to the hardware revision (Version A SMVB) found in system information tools. 🛠️ Key Technical Specifications Chipset: Intel H470. Processor Socket: LGA 1200.
Form Factor: Customized (approx. 11.45 x 9.17 inches), specifically designed for HP chassis.
Power Input: Uses a proprietary HP power connector (not standard ATX). 🚀 Processor & Memory Support CPU Support:
Supports 10th Generation Intel Core (i3, i5, i7) up to 65W TDP. Note: It does not support 11th Gen Intel processors. RAM: Two DDR4 UDIMM (288-pin) slots. Supports up to 32 GB (2 x 16 GB) on 64-bit systems.
Speeds supported up to 2933 MHz (depending on the CPU installed).
Faster RAM (like 3200 MHz) will downclock to 2933 or 2666 MHz because the board does not support XMP. 🔌 Expansion & I/O Ports 3200MHz (supports 2933MHz) ram in HP 8767 motherboard
Unlike standard desktops, this is an All-in-One (AIO).
Strengths (at launch):
Weaknesses:
Check the silkscreen between PCI slot 2 and 3 — genuine SMVB boards have a tiny “REV: 1.03B” and a manufacturing code starting with SMVB. Original boards were deep blue‑green, not the usual HP beige‑green.
Emulation? None. Reproductions? Zero. If yours dies, harvest the BIOS chip — it’s the last remaining artifact of HP’s most interesting forgotten motherboard.
The HP 8767 motherboard, commonly referred to by its codename "Baker," is a proprietary board found in various HP Pavilion and Envy desktop series, such as the HP Pavilion Gaming TG01. It is designed around the Intel H470 chipset (Comet Lake), primarily supporting 10th-generation Intel processors and limited 11th-generation models. Technical Specifications Baker motherboard Go to product viewer dialog for this item.
is built for mid-sized gaming and home office desktops, featuring a layout that deviates from standard ATX configurations. Chipset: Intel H470. Socket: LGA 1200. Expansion Slots: One PCIe x16 slot for graphics cards. One PCIe x1 slot.
Two M.2 slots (typically one for NVMe SSDs and one for a Wi-Fi/Bluetooth card).
Memory: Two 288-pin DDR4 UDIMM slots supporting up to 64GB (2x32GB) of RAM. Network: Integrated Intel Ethernet I219-LM.
I/O Ports: Includes USB-C, standard USB ports, and a front-facing SD card slot on many configurations. Processor and GPU Compatibility Because it is a proprietary board, the Go to product viewer dialog for this item.
has specific power and Thermal Design Power (TDP) limitations. CPU and Motherboard Compatibility - HP Support Community
Understanding the HP 8767 "Baker" Motherboard: A Complete Upgrade & Specs Guide If you own an HP Pavilion Gaming Desktop TG01-1160xt
or a similar model from that series, you are likely running on the HP 8767 motherboard , internally known as the "Baker" board hp 8767 a -smvb- motherboard
. While it is a solid foundation for entry-level to mid-range gaming, its proprietary design can make upgrades a bit tricky.
This post breaks down everything you need to know about the HP 8767, from CPU compatibility to RAM limits. 1. Key Specifications at a Glance The Baker motherboard is built around the Intel H470 chipset and utilizes the LGA1200 socket Form Factor:
HP Proprietary (Note: This uses a non-standard 4-pin power connector rather than the typical 24-pin ATX, making aftermarket power supply swaps difficult without specific HP parts). Expansion:
One PCIe x16 slot (PCIe 3.0) and two M.2 slots (one typically used for Wi-Fi and one for an NVMe SSD). Audio/Networking: Integrated Realtek ALC3601 audio and 10/100/1000 GbE LAN. 2. CPU Upgrade Compatibility The most critical limitation of the HP 8767 is its 65-watt TDP limit
. Because the board's power delivery system is designed for efficiency rather than overclocking, you cannot use high-wattage "K" series processors like the i9-10850K. Compatible Processors: Best Performance: Intel Core i7-10700 or i7-10700F. Mid-Range: Intel Core i5-10400 or i5-10400F. Entry-Level:
Intel Core i3-10100 or i3-10100F (Note: "F" models require a dedicated graphics card as they lack integrated graphics). 3. RAM Limits: Maximum Memory
One of the easiest ways to boost this system is through a memory upgrade. The Baker board features two 288-pin DDR4 UDIMM slots. Max Capacity: (2 x 32GB sticks). Speed Support: DDR4-2666 or
(though the motherboard may clock down faster RAM to match its specific bus speed). Configuration: Always install RAM in pairs to enable Dual Channel mode for optimal gaming performance. 4. Graphics Card (GPU) Upgrades
While the board has a PCIe x16 slot that physically fits modern cards, you must be careful about physical space and power. Space Constraints:
The TG01 chassis is compact. Stick to "mini" or "compact" GPU models (usually two fans or fewer). Power Limits:
If you have the stock 310W or 400W HP power supply, you are likely limited to cards like the NVIDIA RTX 4060 GTX 1660 Super . Upgrading the GPU often requires a corresponding HP-proprietary PSU upgrade 5. Troubleshooting Common Issues
If your 8767 motherboard is acting up, watch for these "early warning" signs:
10100f its works on baker motherboards ? - HP Support Community
The HP 8767 A (SMVB) motherboard, affectionately known by its HP codename
is the silent engine behind many popular modern HP desktop lines, including the Pavilion Gaming TG01 Pavilion TP01
series. Often overlooked as just another proprietary "prebuilt" component, this board actually tells a fascinating story of the transition between mainstream office computing and entry-level gaming. 🧩 The "Baker" Identity
In the world of HP hardware, every motherboard is given a specific name and an (Subsystem ID). For the 8767, that ID is . It is built on the Intel H470 chipset
, placing it firmly in the era of Intel's 10th Generation "Comet Lake" processors. ⚡ Technical Heartbeat
While it may look simple compared to flashy aftermarket boards, the Baker motherboard is surprisingly capable for its class: Processor Support:
It natively supports 10th Gen Intel Core i3, i5, and i7 processors with up to a 65W TDP. Memory Architecture: It features two DDR4 UDIMM slots, supporting up to 32GB of RAM
at speeds of 2666 MHz or 2933 MHz, depending on the installed CPU. Expansion:
It provides a PCIe x16 slot for dedicated graphics cards and an M.2 slot for high-speed NVMe SSDs. I/O Connectivity: The board includes modern staples like USB Type-C
(5 Gbps) and integrated Wi-Fi/Bluetooth support via a dedicated M.2 WLAN slot. 🛠️ The DIYer's Challenge
The Baker motherboard is a prime example of HP's proprietary design philosophy. This makes it an "interesting" subject for enthusiasts because it challenges standard building conventions: 3200MHz (supports 2933MHz) ram in HP 8767 motherboard
The Go to product viewer dialog for this item. , also known by the codename "Baker," is a specialized motherboard found in several HP Pavilion Gaming and Desktop series PCs, such as the Pavilion Gaming TG01-1185t. It is designed for 10th Generation Intel processors and uses a proprietary power connector system. Key Technical Specifications
According to HP Motherboard Specifications, the Baker motherboard features the following: Socket Type: LGA 1200. Chipset: Intel H470. Form Factor: Proprietary (Custom for HP chassis). Memory: 2 x DDR4 UDIMM (288-pin) slots. The HP 8767A-SMVB motherboard is a proprietary mainboard
Supports up to 32GB (per some official docs) or 64GB (2x32GB) according to verified community upgrades.
Speeds supported: up to 2933 MHz (depending on the processor). Expansion Slots: 1 x PCIe Gen 3 x16. 1 x PCIe Gen 3 x1. 1 x M.2 socket 1, Key A (for WiFi/Bluetooth). 1 x M.2 socket 3, Key M (2280/2242) for NVMe SSDs. Processor Compatibility
The board strictly supports 10th Generation Intel Core (Comet Lake-S) processors with a TDP up to 65W. Common compatible models include: Core i7: 10700, 10700F. Core i5: 10400, 10400F. Core i3: 10100. Pentium/Celeron: G6400, G5900. Note: It does not support 11th Gen or newer Intel CPUs. Connectivity & Ports The Baker motherboard's I/O layout typically includes:
Rear Ports: 4 x USB 2.0 Type-A, 1 x HDMI 1.4b, 1 x VGA, 1 x RJ-45 Ethernet, and 3 x Audio jacks.
Front/Internal Headers: Support for USB 3.2 Gen 1 (Type-A and Type-C) and a 3-in-1 media card reader. Important Upgrade Considerations
Power Supply: This board uses a proprietary HP power connector and is not compatible with standard ATX power supplies.
Graphics: While it physically supports modern GPUs (including PCIe 5.0 cards), they will operate at PCIe 3.0 speeds due to the board's chipset limitations. 3200MHz (supports 2933MHz) ram in HP 8767 motherboard
To understand the 8767 A -SMVB-, look at the systems it came in. You will typically find this board inside:
These systems were shipped with Windows Vista or Windows 7, often with 2GB of DDR3 and a slow 5400RPM hard drive.
For a modern gaming PC? No. For a daily driver Windows 11 machine? Not officially (TPM 2.0 is missing, though bypasses exist). However, for a dedicated TrueNAS Core server, a PfSense firewall, a Batocera retro-gaming console, or a Windows 10 LTSC office PC, this board is an incredible bargain.
The HP 8767 A -SMVB- is a testament to HP’s commercial-grade engineering. It lacks frills, but it delivers stability, PCIe flexibility, and a level of documented repairability that newer, more integrated boards have abandoned. If your old HP desktop stops working, do not junk it—hunt down one of these boards, give it fresh thermal paste, and it will likely run for another decade.
Have you worked with an HP 8767 A -SMVB- motherboard? Share your repair story or compatible part discovery in the comments below.
This article is for informational purposes. Always follow ESD safety when handling motherboards. HP, Intel, and other trademarks are property of their respective owners.
The HP 8767 motherboard , internally codenamed "Baker," is a custom system board primarily found in HP Pavilion Gaming Desktop TG01 and Envy TE01 series. It uses the Intel H470 chipset and is designed specifically for 10th Generation Intel Core processors. Core Technical Specifications Baker motherboard
is a proprietary HP design, meaning it does not follow standard ATX mounting or power conventions.
Motherboard Information needed for RAM Upgrade - HP Community
The HP 8767 A (SMVB), also known by the HP codename "Baker," is a proprietary motherboard found in HP Pavilion Gaming and desktop PCs like the TG01 and TP01 series. Verdict
This board is a reliable "no-frills" foundation for entry-to-mid-level gaming, but its proprietary nature and locked BIOS make it a poor choice for enthusiasts who want to overclock or perform heavy custom upgrades. Core Specifications Chipset: Intel H470.
Socket: LGA 1200, supporting 10th Gen Intel Core processors (up to 65W TDP).
Memory: 2x DDR4 UDIMM slots. It supports up to 32GB (2x16GB) of RAM.
Note: While it can physically fit 3200MHz RAM, it is often locked to 2666MHz or 2933MHz depending on your CPU. Expansion: 1x PCIe x16 (typically PCIe 3.0). 1x M.2 socket 3, key M for NVMe SSDs. 1x M.2 socket 1, key A for WiFi/Bluetooth. Pros 3200MHz (supports 2933MHz) ram in HP 8767 motherboard
Deep within the chassis of an HP Pavilion Gaming Desktop TG01, there lived a motherboard known to the system as "Baker," though its technical SSID was 8767. Baker wasn't a standard, off-the-shelf board; it was custom-built for its specific purpose, a silent engine designed to power the digital dreams of gamers. The Architecture of Baker
Baker was forged with an Intel H470 chipset and an LGA1200 socket, making it a welcoming home for 10th Generation "Comet Lake" processors. It stood ready to host a variety of inhabitants:
The Brains: It could support everything from a humble Intel Core i3-10100 to the more powerful i7-10700, provided they stayed within its 65W thermal design power (TDP) limit.
The Memory: For its short-term memory, Baker offered two DDR4 UDIMM slots. It could hold up to 32 GB of RAM, though it had a preference for speeds up to 2933 MHz.
The Vision: For sight, it featured a single PCIe x16 Gen 3.0 slot, often paired with cards like the GTX 1650 to bring virtual worlds to life. Core components and architecture
The Storage: Tucked away were its expansion ports: one M.2 Key M slot for lightning-fast NVMe SSDs and an M.2 Key A slot reserved for its wireless connection to the world. A Life of Upgrades
Baker's story was often one of transformation. Users frequently visited its BIOS (version F.54 being a notable milestone) to ensure it stayed compatible with the latest tech. Gamers would debate its limits, wondering if they could push it further with an RTX 3060 or if it could handle the higher 3200 MHz RAM sticks.
Motherboard Information needed for RAM Upgrade - HP Community
The HP 8767 motherboard, codenamed Baker, is a custom micro-ATX motherboard commonly found in HP Pavilion Gaming (TG01 series) and ENVY desktops. It is designed around the Intel H470 chipset and the LGA 1200 socket, primarily supporting 10th Generation Intel Core "Comet Lake-S" processors. Key Specifications 3200MHz (supports 2933MHz) ram in HP 8767 motherboard
The HP 8767 motherboard, internally known as the "Baker" motherboard (SSID: 8767), is a proprietary system board primarily found in the HP Pavilion Gaming Desktop TG01 series. It is built on the Intel H470 chipset and utilizes the LGA 1200 socket, designed to support 10th Generation Intel Core processors. Technical Specifications
Based on official documentation from the HP Support site, the following are its core technical attributes: HP Desktop PCs - Motherboard Specifications, Baker
HP 8767 A -SMVB- Motherboard: A Comprehensive Overview
The HP 8767 A -SMVB- motherboard is a crucial component of a computer system, serving as the main circuit board that connects and supports various hardware components. This motherboard is specifically designed for HP computers, providing a reliable and efficient platform for processing information. In this essay, we will explore the features, specifications, and significance of the HP 8767 A -SMVB- motherboard.
Key Features and Specifications
The HP 8767 A -SMVB- motherboard is a Micro-ATX form factor motherboard, measuring 244mm x 244mm in size. It supports Intel Core i7, i5, and i3 processors, as well as Celeron and Pentium processors, making it a versatile option for various computing needs. The motherboard features a Socket LGA1155, which allows for easy installation of compatible CPUs.
In terms of memory, the HP 8767 A -SMVB- motherboard supports up to 16GB of DDR3 RAM, with two DIMM slots available for expansion. The motherboard also features a range of storage options, including SATA III and SATA II ports, allowing users to connect multiple hard drives, solid-state drives, and optical drives.
Connectivity and Expansion Options
The HP 8767 A -SMVB- motherboard offers a range of connectivity options, including:
Power Supply and Cooling
The HP 8767 A -SMVB- motherboard features a 24-pin ATX power connector, which provides power to the motherboard and its components. The motherboard also supports a range of cooling options, including a CPU fan header and a chassis fan header, allowing users to install case fans and CPU coolers to maintain optimal system temperatures.
BIOS and UEFI
The HP 8767 A -SMVB- motherboard features a UEFI BIOS, providing a user-friendly interface for configuring system settings and monitoring system performance. The UEFI BIOS also supports secure boot, ensuring that the system boots only with authorized firmware and software.
Significance and Reliability
The HP 8767 A -SMVB- motherboard is a reliable and efficient platform for computing, providing a stable foundation for various applications, including:
Conclusion
In conclusion, the HP 8767 A -SMVB- motherboard is a reliable and efficient platform for computing, providing a range of features and specifications that support various applications and use cases. Its support for Intel Core i7 and i5 processors, multiple display outputs, and high-quality audio make it an excellent choice for business, gaming, home, and education environments. The motherboard's UEFI BIOS and secure boot features ensure a secure and stable computing experience. Overall, the HP 8767 A -SMVB- motherboard is a solid foundation for building a reliable and high-performance computer system.
motherboard, codenamed is a custom-form-factor board commonly found in the HP Pavilion Gaming Desktop (TG01-series) HP Support Community It uses the Intel H470 chipset and is designed specifically for 10th Generation Intel Core processors. HP Support Community ⚙️ Core Specifications Intel H470. Dimensions: 29.09 x 23.3 cm (Non-standard size). 2 DDR4 UDIMM slots (288-pin). Expansion: 1 PCIe x16 slot (for GPU). 1 PCIe x1 slot. 1 M.2 socket 3, Key M (for NVMe SSDs). 1 M.2 socket 1, Key A (for Wi-Fi/Bluetooth). HP Support Community 🚀 Upgrade Guide Processor (CPU) The board supports 10th Gen "Comet Lake" chips with a TDP up to 65W Best Compatibility: i7-10700 or i7-10700F.
High-performance "K" series chips (like i9-10850K) are generally not recommended
due to their 125W power draw, which may exceed the board's power delivery limits. Memory (RAM) 3200MHz (supports 2933MHz) ram in HP 8767 motherboard
This is a mobile-on-desktop motherboard, meaning it uses laptop-style components (SO-DIMM RAM, mobile CPU) inside a desktop form factor.
Here is a comprehensive guide for the HP 8767 (TouchSmart 600) Motherboard.
The TouchSmart 600 chassis has limited airflow.