Once the watch reboots, you will need to pair it with the MiBro App again, just like you did on day one. Scan the QR code on the watch screen with your phone, set up the time zone, and re-add your parent profile.
Pro Tip: Write down the new 4-digit passcode and stick it in a kitchen drawer. You’ll thank me later.
Have you tried these steps? If your MiBro P5 Link is still acting up, contact MiBro customer support—your watch may have a hardware issue covered by warranty.
To hard reset your Mibro Kids P5 watch, you can use a dial code directly on the watch or send a remote command via SMS from a paired phone. These methods will restore the device to its factory settings and erase all stored data. Method 1: Using the Watch Dial Pad
This is the most direct way if you have physical access to the device and the screen is unlocked.
Wake the device: Press the Power button to turn on the screen.
Open Dialer: Navigate to and open the Dial application on the watch menu. Enter Code: Dial the following number exactly: *#174714#. Initiate Reset: Tap the Call button.
Confirm: When a popup appears, tap Yes to begin the process. Wait for the watch to reboot. Method 2: Remote Reset via SMS
If you cannot access the watch menu, you can trigger a reset by sending a text message to the SIM card inside the watch.
Requirement: The watch must have a working SIM card with active cellular service and be turned on. Steps: Open the Message app on your smartphone.
Start a conversation with the phone number assigned to the watch's SIM card.
Type and send one of the following commands (case-sensitive, lowercase): pw,123456,factory# pw,523681,factory#
The watch should respond with a text like "factory ok, reset..." and restart automatically. Method 3: Using the Mibro Kids App
If the watch is still paired with your phone, you may find reset options within the app settings. Open the Mibro Kids application on your paired smartphone. Tap on the Equipment or Device icon. Scroll down to find the Reset or Factory Reset option. Tap Determine or Confirm to start the process.
For a general overview of the factory reset process on Mibro smartwatches, you can watch this instructional video:
To perform a hard reset on a Mibro Kids P5 , you can use three primary methods: SMS Command On-Device Settings . Before starting, ensure the watch has at least 50% battery to prevent any system corruption during the wipe. Method 1: Use the Dial Pad (Fastest)
This is the most direct way to reset the watch using its built-in hardware interface. Wake up the screen by pressing the Power button Dial application (Phone icon) on the watch. Enter the code: Call button A confirmation popup will appear; tap to begin the factory reset. Method 2: SMS Command (Remote Reset)
If you cannot access the watch menu, you can trigger a reset by sending a text message from the paired parent's phone. This requires the watch to have an active SIM card and cell service.
Ensure the watch is turned on and connected to the mobile network. paired phone , open your standard messaging app. Send a text message to the watch's phone number how to hard reset mibro kids p5 link
Type one of the following commands exactly (case-sensitive): pw,123456,factory# pw,523681,factory# Wait for the watch to reply with a text saying " factory ok, reset.. Method 3: System Settings Menu
If the watch is unlocked and responsive, you can navigate the menus to find the reset option. Power/Side button twice to open the main menu. Find and tap the Settings icon (gear symbol). Scroll down to System Settings Factory Reset and then the to confirm. Troubleshooting & Tips How to Hard Reset MIBRO Watch C2
How to Hard Reset Mibro Kids P5 Link: A Step-by-Step Guide
Are you experiencing issues with your Mibro Kids P5 Link smartwatch, such as freezing, crashing, or failing to respond to touch inputs? If so, a hard reset may be the solution you need. A hard reset, also known as a factory reset, will erase all data on the device and restore it to its original settings. In this article, we'll walk you through the steps to hard reset your Mibro Kids P5 Link smartwatch.
Why Hard Reset Mibro Kids P5 Link?
Before we dive into the steps, let's discuss some common reasons why you may need to hard reset your Mibro Kids P5 Link:
Pre-Hard Reset Precautions
Before performing a hard reset, make sure to:
Step-by-Step Guide to Hard Reset Mibro Kids P5 Link
To hard reset your Mibro Kids P5 Link, follow these steps:
Method 1: Using the Watch's Settings Menu
Method 2: Using the Mibro Fit App
Method 3: Using the Hardware Buttons
Post-Hard Reset Setup
After the hard reset process is complete, your Mibro Kids P5 Link will restart and guide you through the initial setup process. Follow these steps:
Conclusion
A hard reset can resolve various issues with your Mibro Kids P5 Link smartwatch. By following the steps outlined in this article, you can perform a hard reset and restore your device to its original settings. Remember to backup your data before performing a hard reset, and take necessary precautions to ensure a smooth process.
If you're still experiencing issues after a hard reset, you may want to contact Mibro support or visit an authorized service center for further assistance. Once the watch reboots, you will need to
FAQs
Q: Will a hard reset erase all data on my Mibro Kids P5 Link? A: Yes, a hard reset will erase all data on your device.
Q: Can I recover my data after a hard reset? A: No, data recovery is not possible after a hard reset.
Q: How long does a hard reset take? A: The hard reset process typically takes a few minutes to complete.
Q: Will a hard reset void my warranty? A: No, a hard reset will not void your warranty. However, if you're experiencing issues due to a hardware problem, a warranty claim may be necessary.
To hard reset a Mibro Kids P5 watch, you can special dial code remote SMS command , or use the paired mobile application
. Hard resetting will erase all personal data, apps, and settings, returning the device to its original out-of-the-box state. Essential Pre-Reset Checklist
Before proceeding, ensure the watch meets these requirements to avoid software damage: Battery Level : Ensure the watch is charged to at least (some models recommend 50%). Active SIM
: For SMS methods, a working SIM card capable of receiving messages must be inserted. Method 1: Using the Watch Dial Pad (Recommended)
This is the most direct way to perform a factory reset if you have access to the watch's interface. Power button to wake up the screen. Navigate to and open the Dial application Enter the code: Call button When the confirmation popup appears, tap to begin the reset. Method 2: SMS Remote Command
If the watch is paired but you cannot access its menu, you can trigger a reset by sending a text message from the administrator's phone. Messages app on the phone paired with the watch. Start a conversation with the phone number assigned to the watch's SIM card
Type and send one of the following commands (all lowercase): pw,123456,factory# pw,523681,factory#
The watch should reply with a confirmation such as "factory ok, reset..." and begin the process. Method 3: Using the Mibro Kids App If you prefer using the mobile interface, the Mibro Kids app can often initiate a reset remotely. Hard Reset MIBRO Kids P5
Here’s a draft feature guide for performing a hard reset on the Mibro Kids P5 Link.
This is the easiest method if the watch is responsive and you can navigate the screen.
This is the most common fix for the Mibro Kids P5 when the screen is locked or the watch is acting erratic. This method uses the physical button combination to force the device to restore factory settings.
⚠️ Important Warning: A hard reset will erase all data on the watch. This includes the step history, saved contacts (if not synced), and call logs. However, as long as you log back into the Mibro Kids App on your phone after the reset, the watch will re-sync the contacts and phone numbers from your account.
The Steps:
If the standard button hold did not work, some firmware versions of the Mibro Kids P5 respond to an "S.O.S." style reset. This is often used if the watch is frozen on a specific screen.
The Steps:
The MiBro Kids P5 Link is a robust 4G smartwatch designed to keep parents connected with their children through GPS tracking, voice calls, and video messaging. However, like any piece of technology, it can occasionally freeze, lag, or become unresponsive. You might also need to wipe the device completely before selling it, handing it down to another sibling, or fixing persistent software glitches.
Important Note: A hard reset (also known as a factory reset or master reset) will erase ALL data from the watch. This includes contacts, chat history, voice messages, photos, and personalized settings. The SIM card data remains untouched, but watch settings revert to how they were when you first unboxed it. After the reset, you will need to re-pair the watch with the SeTracker2 or MiBro app on your parent’s phone.
In the ecosystem of modern parenting, the children’s smartwatch has emerged as a digital comfort blanket. The Mibro Kids P5 Link, with its GPS tracking, two-way calling, and SOS features, offers a vital tether between parent and child. However, like any piece of technology, it is susceptible to digital hiccups: forgotten passwords, unresponsive touchscreens, persistent lag, or pairing failures with the parent’s “Mibro” app. When these software snags occur, the most definitive solution is often the most drastic one: a hard reset. This process, sometimes called a factory reset or master reset, wipes all user data, returning the watch to its original, out-of-the-box state. While the P5 Link lacks a physical “reset” pinhole, the procedure is a deliberate, button-driven sequence designed to be performed directly on the small touchscreen.
Before initiating a hard reset, it is crucial to understand the irreversible consequences. Executing this command will erase all stored data on the device, including the watch’s contact list, call history, step counts, sleep records, and any downloaded watch faces. Crucially, it will also sever the binding between the watch and the parent’s smartphone. Therefore, a hard reset should never be the first troubleshooting step; it is the last resort after restarting the device and checking for firmware updates. Parents should also ensure the child’s SIM card is still active and properly inserted, as a hard reset does not remove carrier settings but does require re-pairing via the Mibro app.
To initiate the hard reset on the Mibro Kids P5 Link, one must navigate the watch’s proprietary operating system. Begin by waking the screen with a press of the side button. From the main watch face, swipe upward or downward (depending on firmware version) to access the app menu or quick settings. Look for a gear-shaped “Settings” icon. Tap it to enter the system menu. Unlike more intuitive consumer devices, the P5 Link often hides the reset option under sub-menus. Scroll through options such as “System,” “Device,” or “More Settings.” The exact label can vary slightly with updates, but eventually, you will find an entry labeled “Reset,” “Factory Reset,” or “Restore.”
Selecting this option triggers a final warning screen, often displaying a phrase like “Erase all data?” or “Restore to factory defaults.” This is the point of no return. To confirm, the user typically must tap a green checkmark or press the side button again. The screen will go dark for a moment, and the watch will reboot. Upon restarting, the Mibro Kids P5 Link will display a welcome screen or a QR code, just as it did when first unboxed. The child’s personal data is gone. The digital slate is clean.
Once the hard reset is complete, the watch cannot function independently. It must be re-paired with the parent’s phone. To do this, open the Mibro App on the parent’s smartphone, navigate to the “Add Device” section, and scan the QR code displayed on the watch’s screen. The app will guide you through re-establishing the connection, setting up new contacts, and configuring security features like the SOS number and safe zones. In a sense, the hard reset does not destroy the watch but rather returns it to a state of dependence, ready for the parent to rebuild the digital boundaries from scratch.
In conclusion, a hard reset on the Mibro Kids P5 Link is a powerful tool—a digital emergency brake for when software issues compromise the watch’s primary function of safety and communication. It is a multi-step, deliberate process that demands caution, as data loss is permanent. Yet, mastering this procedure empowers parents to resolve the most stubborn glitches, recover a forgotten password, or prepare the device for a new user. By understanding how to wipe and restore the P5 Link, you ensure that this small guardian on your child’s wrist remains reliable, secure, and ready for the next adventure.
If the watch is still responsive enough to navigate the menus, this is the quickest method. The interface is icon-based, so follow these steps closely.
Step 1: Unlock the Watch Press the side power button to wake the screen. Swipe up or tap the screen to unlock it. If you have a screen-lock PIN set, enter it.
Step 2: Access the Main Menu From the watch face (clock display), swipe left or right until you find the Menu screen. This is where you see icons like Phone, Camera, Gallery, etc.
Step 3: Find the Settings Icon Look for the Settings (Gear or Cogwheel) icon. It is usually on the second or third page of the menu. Tap it.
Step 4: Scroll to “Restore Factory” or “Reset” Inside the Settings menu, swipe up to scroll down. Look for an option labelled:
Note: On some firmware versions, this option is hidden inside a sub-menu called “System” or “More Settings.”
Step 5: Confirm the Reset
Tap the “Restore Factory” option. The watch will ask you to confirm your choice. Tap Confirm, OK, or √ (Checkmark).
Some models will also ask for a security code. The default password for the MiBro P5 Link is usually 1234 or 0000. If you changed it previously, use that code.
Step 6: Wait for Reboot The watch screen will go black, then show a “Resetting…” or Android-like robot icon. After 30–60 seconds, the watch will reboot and show the initial setup screen (language selection and pairing QR code). Your hard reset is complete. Have you tried these steps
| Problem | Likely Solution | | :--- | :--- | | Watch stuck on “Activating” | The SIM card needs data. Turn off Wi-Fi on the watch and ensure mobile data is enabled via the app. | | QR code won’t scan | Clean the watch screen. If still not working, enter the 16-digit Device ID (found on the watch box or under battery) manually in the app. | | Battery drains fast after reset | Normal for first 24 hours as the watch re-downloads GPS assistance data. Charge fully and restart once. | | “Invalid SIM” error | The watch is carrier-locked to specific 4G bands. Use only recommended SIMs (usually 2G/3G fallback is disabled on modern networks). |
Meld je aan en ontvang eens in de 4–6 weken onze nieuwsbrief vol inspiratie en updates.
Geen zorgen: we houden het leuk en relevant — en afmelden kan altijd met één klik.
