How Do I Reset My Parrot | Mki9200 Without Remote
Turn your car ignition completely OFF. Wait 30 seconds to ensure the capacitors in the Parrot unit fully discharge. Turn the ignition back ON.
Result: The Parrot MKi9200 should now boot up with the "Parrot" logo animation, followed by the language selection menu. This indicates the memory has been wiped and the device has been reset to factory defaults.
If you truly need a full factory reset and cannot find the remote:
Without the remote or a firmware reinstall, you are limited to clearing only the Bluetooth memory. For most users, that is enough to sell the car or connect a new phone.
Resetting a Parrot MKi9200 typically requires the wireless remote to navigate menus. However, if you have lost or broken the remote, you can still perform a reset using the methods below. Method 1: Using Steering Wheel Controls (Unika Interface)
If your car is equipped with the Parrot Unika interface, which allows your steering wheel buttons to control the Parrot system, you can use a specific button sequence to reset it: how do i reset my parrot mki9200 without remote
Enter the Menu: Press Track Forward, Track Back, Track Forward, Track Back in quick succession.
Navigate to Settings: Use the Track Forward button to find the "Settings" menu.
Advanced Settings: Press the Phone Button (typically the "accept call" button) to enter, then scroll to "Advanced Settings".
Factory Reset: Select "Factory Reset" and confirm with the Phone Button. The unit will reboot and clear its memory. Method 2: Physical Power Reset (Hard Reset)
If you do not have steering wheel controls, you can perform a hard reset by cutting the power. This is often used to resolve connection glitches or "full memory" errors. Turn your car ignition completely OFF
Disconnect Power: Remove the car's ignition key and disconnect the power to the Parrot bluebox (the main control unit) for approximately 10 minutes.
Check Wiring: Some users find that swapping the red and orange fuse holders on the Parrot wiring harness can fix power-cycle issues, ensuring the unit displays "Goodbye" correctly when you turn off the car. Method 3: Hardware Button Reset (If Memory is Full)
Some versions of the kit allow a forced memory clear using physical buttons on the device itself if it becomes unresponsive:
Press and hold the Green button, the center jog wheel, and the Red button simultaneously for about 10 seconds.
The screen should go blank and the device should beep, indicating a reset. Important Notes Remote Availability: Official spare remotes for the If you truly need a full factory reset
are no longer manufactured, though you may find used ones on secondary markets.
Battery Check: If your remote is simply unresponsive, try replacing the CR2032 battery before assuming it is broken. Do you have steering wheel buttons available, or
How to reset a Parrot MKi9200 without the remote - JustCarKits
The unit will reboot and clear paired devices and custom settings.
Some users report that the MKi9200 has a hardware-based reset using the main unit itself. The logic board includes a physical reset point, but accessing it requires a paperclip or a SIM ejector tool.
If you have tried the wired control pad, the paperclip reset, and the power cycle, but your Parrot MKi9200 still won’t reset or respond, the internal memory may be corrupted beyond software recovery. In this case:
Warning: Not all MKi9200 revisions have this pinhole. If you don’t see one, do not drill into the box. Instead, try Method 3.
If none of the above work, the unit may have a hardware fault, and you’d need to borrow a Parrot remote from a friend or shop to try a full factory reset.