Hi Sharp Dvr Reset Password Fix -
If your DVR is connected to the internet and you have previously set it up on a mobile app (such as HiView or a generic P2P app), you can often reset the password through the app interface. This is a security feature to ensure the person resetting the password has physical access to the registered email.
Steps:
If you successfully reset the device or are unsure if the password was ever changed, try these standard factory default combinations:
If you want, tell me the exact SHARP DVR model number (from the sticker on the unit) and whether you can open the case; I’ll give model-specific reset steps and likely default credentials.
Forgetting the password to your HI SHARP DVR can be a major roadblock to accessing critical security footage. Fortunately, there are several official and hardware-based methods to regain access. 1. Try Common Default Passwords
Before attempting a hard reset, verify if your system is still using factory settings. The default credentials vary by model:
Admin / 123456: This is the most frequent default for modern HI SHARP DVRs and NVRs. Admin / 1234: Common on older analogue HD units. Admin / 0000: Used on specific 16-channel DVR models.
Admin / Admin: Occasionally used for IP finder software logins. 2. Official "Dynamic Code" Reset
If you cannot log in, HI SHARP provides a "Dynamic Code" recovery method through their authorized channels:
On the DVR login screen, click "Forget Password" or "Retrieve Password".
Navigate to the "Dynamic Code" page, which will display a unique code or QR code. Take a photo or screenshot of this screen.
Contact your regional distributor or the seller you purchased the device from. You can also email sales@hisharp.com.tw with your region, model number, and serial number to receive a temporary unlock code. hi sharp dvr reset password fix
3. Password Reset via Mobile App (Hi Sharp EX / Superlive Plus) For newer models with cloud features enabled: Resetting Password of DVR/NVR by Scanning QR Code
For resetting the password on a Hi Sharp DVR , the process varies depending on the age of your device and the firmware version. Most modern Hi Sharp recorders use a Dynamic Code or technical support verification method, while older units may still respond to default credentials. Method 1: The "Dynamic Code" Method (Recommended)
This is the standard procedure for current Hi Sharp DVRs/NVRs.
Open the Login Window: Go to the login screen on your DVR monitor.
Access Password Recovery: Click on "Forget Password" or "Retrieve Password".
Generate Dynamic Code: Select the "Dynamic Code" option. This will display a unique temporary code or a QR code on the screen.
Contact Support: Take a clear photo of this screen and email it to sales@hisharp.com.tw or contact your regional distributor. Include your model number and serial number in the request.
Apply the Key: Once they reply with a temporary password, enter it into the DVR to unlock the system and immediately set a new permanent password. Method 2: Remote Control "Secret" Reset (Specific Models)
Some Hi Sharp NVR and DVR models (like the NF series) allow a reset via the physical remote control: Point the remote at the DVR.
Press the following sequence: 8 → 8 → [ID Number] → Enter.
Note: The ID number is typically between 0 and 65535; if you haven't changed it, try the default ID found in your manual. Method 3: Default Credentials (Old or Unconfigured Units) If your DVR is connected to the internet
If the DVR is new or has been factory reset, try these common default combinations: Username: admin | Password: admin Username: admin | Password: 123456 Username: admin | Password: (Leave Blank)
For a general overview of how DVR password recovery systems typically work across various brands, you can watch this guide: How to Recover DVR Password | 2 Tested Method 2025 Technical Th1nker YouTube• Nov 11, 2023 Prevention Tip
Once you regain access, it is highly recommended to reserve an email address within the Configuration > User settings. This allows you to reset your password via a verification code sent to your phone or email without needing to contact technical support in the future.
Do you have the serial number and model number from the sticker on your DVR, or would you like help finding them? How to Reset DVR Password
The process for resetting a Hi Sharp DVR password involves official software tools, dynamic recovery codes, or contacting technical support, as most modern units do not support physical hardware reset buttons. Key Reset Methods for Hi Sharp DVRs Dynamic Code Recovery
The most common official method is through the "Retrieve Password" interface on the local monitor. Navigate to the Forgot Password Retrieve Password section on the login screen. Select the Dynamic Code page. This will display a unique temporary code or QR code.
Take a screenshot or write down the code and send it to your regional distributor or sales@hisharp.com.tw
along with your model and serial number to receive a temporary reset password. Default Credentials
If you are accessing the system for the first time or after a successful reset, the default login is typically: Hi Sharp IP Finder Software Users can download the IP finder software from the official HI SHARP Support
page. While primarily for locating cameras, it is often the first step in identifying the necessary device information for a support-led reset. "Super Password" Tools (Legacy Models)
For older non-branded or generic H.264 DVRs that share hardware with Hi Sharp, "Super Password" generators (like Superadmin.exe If you successfully reset the device or are
) may work by generating a 24-hour temporary code based on the current date displayed on the DVR monitor. Summary Review Effectiveness Ease of Use Official Support High (Primary method) Moderate (Requires email/contact) Default Password High (For new/reset units) Software Tools : For security, Hi Sharp recommends setting up Security Questions Pattern Lock
during the initial setup wizard to avoid needing a full reset in the future. Do you need help finding the specific email address
for your regional Hi Sharp distributor to send your dynamic code? FAQ - Support | HI SHARP INTELLIGENCE
Sharp DVRs are often rebranded from OEM manufacturers (e.g., Dahua, Hikvision, or generic Linux DVRs).
Common Sharp DVR series:
Check the sticker on the bottom or back of the DVR for the exact model number.
Before we hack away (legally), you need to understand what you are dealing with. Hi Sharp is a popular OEM brand for surveillance systems. Most Hi Sharp DVRs run on a Linux-based embedded operating system similar to Hikvision or Dahua.
The problem: Unlike a smartphone, you cannot simply "factory reset" a DVR via a button on the screen if you don't know the password. The security is designed to prevent thieves from wiping the device. Consequently, unlocking it requires a specific protocol.
Once you successfully perform a Hi Sharp DVR reset password fix, take these steps to avoid repeating the nightmare:
On newer Hi Sharp DVRs connected to a monitor:
Professional installers often use a serial console to reset Hi Sharp DVR passwords. This requires a USB-to-TTL converter and terminal software like PuTTY.
This method is not for beginners. One wrong command can brick the DVR.