The H-IG41-UATX Rev 1.1 uses an American Megatrends (AMI) BIOS with a blue or gray interface. Press DEL during boot to enter. Key sections:
Date: May 3, 2026 | Category: Legacy Hardware Support h-ig41-uatx rev 1.1 manual
If you have landed on this page, you are likely holding a vintage Intel LGA775 motherboard labeled H-IG41-UATX Rev 1.1—or you have inherited an old desktop PC that uses it. This motherboard, produced primarily for OEM systems (such as eMachines, Acer, or Packard Bell), is based on the Intel G41 chipset. Finding the correct manual for the Rev 1.1 revision can be a challenge, as many generic G41 manuals lack specific jumper settings, front panel pinouts, or BIOS recovery steps unique to this revision. The H-IG41-UATX Rev 1
This article serves as a complete replacement and reference guide for the H-IG41-UATX Rev 1.1 manual. We will cover download links, hardware specifications, CMOS configuration, common troubleshooting steps, and legacy driver support. The h-ig41-uatx rev 1
The h-ig41-uatx rev 1.1 is a microATX motherboard built by Foxconn, based on the Intel G41 + ICH7 chipset. It supports LGA775 processors (Core 2 Quad/Duo, Pentium, Celeron), DDR3 memory, and integrated Intel GMA X4500 graphics. The manual was never a standalone retail booklet — it was typically included as a quick reference guide inside prebuilt systems or as a PDF on Foxconn’s support site (now hard to find).