Gt005 Gps Tracker User: Manual

The GT005 will not work "out of the box." It requires a power source and a connection to a mobile network.

Send SMS commands from your authorized phone number to the GT005’s SIM number.

| Function | SMS Command | Reply Example | |----------|-------------|----------------| | Get location | G123456 (default password 123456) | Lat:22.5432, Lng:114.0567, Speed:0km/h, Date:... | | Set authorized number | admin123456 13912345678 | Admin number set. | | Change password | password123456 654321 | Password changed. | | Geo-fence (circle) | circle123456 22.5,114.0,500 | Geo-fence set radius 500m | | Movement alert (over speed) | speed123456 80 | Alert when over 80km/h | | Heartbeat interval | interval123456 60 | Upload every 60 seconds | | Reset device | reset123456 | Rebooting... |

Replace 123456 with your actual password.

The GT005 GPS Tracker is a popular, cost-effective security solution for motorcycles, electric bikes, and cars. This guide serves as a comprehensive manual to help you install, configure, and troubleshoot your device effectively. 🛠️ Product Overview & Specifications

The GT005 is a mini GPRS/GSM/GPS quad-band vehicle tracker. It is designed for real-time tracking with an emphasis on low power consumption and discreet placement. Network: GSM/GPRS Bands: 850/900/1800/1900MHz Voltage Range: 9V - 36V DC (suitable for most vehicles) GPS Sensitivity: -159dBm Location Accuracy: 5-10 meters Features: ACC detection, vibration alarms, and geo-fencing. 📥 Installation Steps 1. SIM Card Preparation Purchase a standard 2G GSM SIM card. Ensure the SIM has an active data plan and SMS credit.

Important: Disable the PIN code request using a mobile phone before inserting it into the tracker. 2. Device Setup Open the back cover of the GT005.

Slide the SIM card into the slot (ensure the gold chips are facing down). Toggle the internal battery switch to "ON" (if applicable).

The LED indicators will begin to flash as the device searches for signals. 3. Wiring Configuration

The GT005 typically features a simple 2-wire or 3-wire harness:

Red Wire: Connect to the positive terminal of the vehicle battery (+).

Black Wire: Connect to the negative terminal or vehicle chassis (-).

Orange/Yellow (Optional): Connect to the ACC (ignition) line to track engine status. 📱 SMS Configuration Commands

You can control the GT005 by sending specific SMS codes from your smartphone to the SIM card number inside the tracker. SMS Command Set Admin Number admin123456 [YourPhoneNumber] Check Location smslink123456 Google Maps Link Check Status param123456 Version, ID, IP, etc. Change Password password123456 [NewPassword] password ok Set APN apn123456 [APN Name] Reboot Device CQ system reset ok (Note: "123456" is the default factory password.) 🌐 Online Tracking Setup

To track your vehicle in real-time via an app or website, you must configure the GPRS settings. Gt005 Gps Tracker User Manual

Set the APN: Send apn123456 [YourNetworkAPN]. (Check with your SIM provider for the correct APN name).

Set the Server: Most GT005 units use a default platform like Dyegoo or GPS588. Send adminip123456 [ServerIP] [Port].

Login: Download the specified app from the manual's QR code. Use the IMEI number (located on the tracker sticker) as the username and "123456" as the password. 🚦 LED Indicator Meanings Blue LED (GPS): Flashing: Searching for satellites. Solid: GPS fixed. Green LED (GSM): Flashing: Searching for network. Solid: GSM signal acquired. ❓ Troubleshooting Common Issues

Device Offline: Ensure the SIM card has data and the APN is set correctly. Check if the vehicle is in an underground garage where signals are blocked.

Inaccurate Location: If the blue LED is flashing, the device doesn't have a "lock" on satellites. Move the vehicle to an open outdoor area.

No SMS Response: Verify the SIM card is inserted correctly and that the "Admin Number" has been set.

If you need help with a specific part of the setup,I can provide the exact APN settings if you tell me your mobile carrier, or I can help you find the correct mobile app for your specific manufacturer.

GT005 GPS Tracker is a budget-friendly, compact tracking device designed for vehicles, motorcycles, and personal assets. It utilizes a multi-mode positioning system (GPS, AGPS, LBS, and BeiDou) to ensure location tracking even in areas with weak satellite signals. 1. Key Features and Functions

The GT005 is equipped with several utility features focused on security and real-time monitoring: Real-Time Tracking

: Monitor targets via SMS, mobile apps (Android/iOS), or web-based platforms. Safety Alerts

: Includes overspeed alarms, vibration alerts, and electronic fence (geo-fence) warnings. Voice Monitoring

: Supports environment pickup and voice recording for remote listening. Power Management

: Offers various modes such as precision mode and power-saving mode to extend battery life. 2. Initial Setup and Installation To get the device online, follow these essential steps: National Assembly of Nigeria GT005 - Banggood 11-Oct-2019 —

This guide provides everything you need to get your GT005 GPS Tracker up and running quickly. 🛠️ Getting Started SIM Card: Insert a standard 2G GSM SIM card. Data Plan: Ensure the card has active SMS and data credit. Power: Connect the Red wire to (+) and Black to (-). Placement: Place the device face up under the dashboard. 📲 Common SMS Commands Send these codes directly to the device phone number: Check Location: Send WHERE# to receive a Google Maps link. Set Admin Number: Send CENTER,A,YourPhoneNumber#. Set APN: Send APN,NetworkName# for data tracking. Check Status: Send PARAM# to see battery and signal info. Reboot: Send RESET# to restart the device remotely. 🚦 Indicator Light Guide Solid Red: Power is connected correctly. Flashing Blue: Searching for GPS signal. Solid Blue: GPS signal is locked. Flashing Green: Searching for GSM/Cellular signal. ⚠️ Troubleshooting The GT005 will not work "out of the box

No Link Received: Check if the SIM card has a PIN lock (disable it).

Inaccurate Location: Ensure the device isn't blocked by thick metal.

Device Offline: Verify the APN settings match your mobile carrier.

📌 Pro Tip: Keep the device away from the car's engine to prevent heat interference and improve signal accuracy. If you’d like, I can help you: Draft a quick-start cheat sheet for your glove box Look up the specific APN settings for your carrier Find the mobile app download link for real-time tracking Which of these would be most helpful right now?

The GT005 GPS Tracker Go to product viewer dialog for this item.

is a mini, high-accuracy tracking device designed for vehicles, motorcycles, and electromobiles. Its versatile design supports real-time monitoring via multiple platforms, including Android and iOS applications, as well as computer clients. Key Features & Functions

Multi-Mode Positioning: Combines GPS, AGPS, LBS, Beidou, and WIFI for precise location tracking even in challenging environments.

Remote Control: Supports remote fuel and power cutoff, as well as remote restart and shutdown through a mobile client.

Security Alerts: Features a built-in vibration alarm, electronic fence (geofencing) warnings, and an overspeed setting.

Voice Monitoring: Includes environment pickup, recording, and voice-activated callback functions.

Emergency Support: Equipped with an SOS emergency call function and a dialable "Family number" for quick communication. Technical Specifications Frequency Band GSM 850/900/1800/1900MHz (Global) Voltage Range 3.6 - 4.2 VDC (Standby current 0.2mA) Accuracy GPS accuracy of 5-10m; LBS accuracy 100-1000m Operating Temp -40°C to +80°C Initial Setup & Installation

To get started, follow the GT series setup guide and ensure you have a standard GSM SIM card with active GPRS and SMS services.

Hardware Connection: For hardwired versions, connect the Red wire to the positive (+) battery terminal and the Black wire to the negative (-) terminal or vehicle chassis.

Powering On: Press and hold the power button for 3 seconds. The blue and yellow lights will alternate, indicating the device is active. The GT005 GPS Tracker is a popular, cost-effective

App Setup: Download the GPSFind app from the Google Play Store or Apple App Store. Log in using the 15-digit IMEI number found on the device and the default password 123456.

Signal Calibration: Place the device in an open area for about 15 minutes to allow it to capture satellite signals for its first "cold start". Essential SMS Commands

For direct control without the app, users can send SMS commands to the device's SIM card number:

Status LED meanings

SMS commands (examples; replace +password with default password 123456 unless changed)

(Include the full, device-specific SMS command list in Appendix.)

Mobile app / web platform

The GT005 does not come with a dedicated app out of the box. Instead, you control it via text messages from an authorized phone number.

First, send this command to set yourself as the admin:

After sending this from your phone to the tracker’s SIM number, you’ll receive a reply: begin ok.

Before diving into commands, let’s identify the parts. The GT005 is a small, magnetic, waterproof box (usually black or gray).

Important: The GT005 does not have an internal rechargeable battery that lasts days. It requires constant 12V or 24V power from a vehicle or battery source. The small backup battery lasts only 10–30 minutes.

Compact portable GPS tracker for real-time location, geo-fence alerts, SOS, historical route playback, and configurable reporting intervals. Suitable for personal, vehicle, and asset tracking.