We will break the setup into three phases: Account Creation, Hardware Preparation, and Software Configuration.
Only if that tracker supports the Jimi/TKStar protocol (Port 8870). Generic trackers using 6050 or 701 protocol will not work. Gpsui.net Setup
Wait for the device LEDs to start blinking. A steady green LED means GPS fix; a blinking blue or red LED indicates GSM network searching. Do not proceed until the GSM LED becomes steady or slow-blinking (connected to tower). We will break the setup into three phases:
Before you begin, ensure you have:
Even with careful planning, you might encounter problems. Here are the most frequent failures and their solutions. Wait for the device LEDs to start blinking
| Issue | Probable Cause | Solution |
| :--- | :--- | :--- |
| Device stays "Offline" | SIM card has no data | Check SIM in a phone; ensure airplane mode is off. |
| "Server Login Fail" | Wrong APN | Google "APN settings for [Your Carrier]" (e.g., T-Mobile, Vodafone). Send SMS: APN,123456,correct_apn |
| Location is static/wrong | No GPS signal | Move device away from metal objects or underground parking. Wait 10 min outside. |
| No map loading | Browser cache | Clear cache or try a different browser (Chrome/Firefox). |
| SMS commands not working | Wrong password | Default passwords: 123456, 0000, or 1234. Check your manual. |
Insert the SIM card into a regular mobile phone first. You must: