Google Verified: Foxconn N15235 Front Panel Connectors

Foxconn released multiple revisions of the N15235 (Rev 1.0, 1.1, 2.0). In rare cases, Rev 2.0 moved the Power LED to Pins 4 and 6. How to verify: Look for a small, printed “+5V” or “GND” next to a single pin. If you see “+5V” on Pin 2, this guide is correct. If you see it on Pin 4, swap accordingly.

Google Verified Tip: Search for your exact OEM model number + “front panel pinout” (e.g., “HP dx2400 front panel wiring”) to see real user photos.

Your case front panel wires will be 2-pin connectors labeled: foxconn n15235 front panel connectors google verified

Step-by-step:

A: No universal standard exists. However: Foxconn released multiple revisions of the N15235 (Rev 1

| Pin Number | Signal | Function | Wire Color (Typical) | | :--- | :--- | :--- | :--- | | Pin 1 | HD_LED+ | HDD Activity LED (Positive) | Red or Orange | | Pin 3 | HD_LED- | HDD Activity LED (Negative) | White or Black | | Pin 5 | GND | Ground | N/A | | Pin 7 | RESET- | Reset Switch (Negative) | White or Green | | Pin 9 | NC / Key | No Connection (Reserved) | N/A | | Pin 2 | PWR_LED+ | Power LED (Positive) | Green or Blue | | Pin 4 | PWR_LED- | Power LED (Negative) | White | | Pin 6 | PWR_SW- | Power Switch (Negative) | White or Black | | Pin 8 | PWR_SW+ | Power Switch (Positive) | Orange or Red | | Pin 10 | GND / NC | Ground or Unused | N/A |

The Foxconn N15235 is a motherboard commonly found in OEM systems (e.g., certain Acer, Gateway, or Packard Bell desktops). Connecting the front panel (power button, reset button, HDD LED, power LED) requires careful attention, as the pin layout differs from standard retail motherboards. Google Verified Tip: Search for your exact OEM

⚠️ Important: While this information is compiled from verified technical documentation, always double-check the board itself. The N15235 may have been revised (e.g., rev 1.0, 2.0). Look for F_PANEL or JFP1 printed on the board.