Final checklist after repair:
✅ Drive visible in Explorer with correct GB
✅ Can copy files without errors
✅ No yellow marks in Device Manager
✅ Passes a full Windows chkdsk /f /r
If you’ve followed this entire guide, you’ve likely saved $20–$50 by not buying a new USB drive. But more importantly, you’ve learned how to resurrect embedded storage devices – a skill that works similarly for SD cards and some SSDs.
Need further help? Leave a comment with your exact Flash ID from ChipGenius, and I’ll help you fine-tune the MPTools v1052 settings for your specific NAND chip.
Disclaimer: This guide is for educational and data recovery purposes. Manipulating USB firmware can void warranties and risk permanent data loss. Always back up critical data before attempting mass production.
The FirstChip FC1178/FC1179 MPTools v1.0.5.2 is a specialized mass production (MP) utility used to repair or format USB flash drives using FirstChip controllers. Released around June 2022, this version introduced several performance optimizations and expanded support for newer NAND flash memory. Key Features of v1.0.5.2
Expanded Controller Support: Primarily supports FC1178 and FC1179 (and the latest 1179s) masters.
3D Flash Optimization: Improved stability for hy 3D (Hynix) and TS 3D (Toshiba) flash, with a specific focus on speed priority during mass production.
Enhanced Yield Rates: Improved card opening yield for mainstream MLC models and optimized support for N38/B47R processes.
Interface Additions: Includes a custom lock disk feature and real-time display of the current configuration name on the interface.
Performance Testing: Integrated tools to test write and read speeds directly within the utility.
Bug Fixes: Resolves issues with "Error Code 2" in previous versions and improves stability for VCCQ 1.2V/1.8V flash read ID exceptions. Installation & Usage Guide
The MPTools utility is a portable "no installation" application, meaning it does not require a standard Windows setup process.
Preparation: Use a tool like ChipGenius to confirm your USB drive's VID, PID, and Controller Part-Number (e.g., FC1178BC or FC1179).
Deployment: Extract the downloaded .rar or .zip archive to a folder on your local drive. Avoid running it directly from a USB stick.
Launching: Open the folder and run the primary executable (typically FirstChip_MpTools.exe). Configuration:
Click Settings (usually requires no password or a default like "123456").
Under Scan Settings, choose "Standard Scan" for initial identification or "Factory Scan" for deep formatting.
Select the Flash ID that matches the results from ChipGenius.
Execution: Return to the main window and click Start. The tool will re-flash the firmware and set aside bad blocks, which may result in a slightly smaller but functional partition. firstchip fc1178 fc1179 mptools v1052 install
Important Warning: Using these tools will wipe all data on the USB drive. They are intended for hardware repair (e.g., "No Media" or capacity errors) rather than data recovery.
FirstChip MPTools v1.0.5.2 is a specialized mass production (MP) tool used primarily to repair corrupted USB flash drives, restore factory capacity, or fix "No Media" errors on drives using FirstChip FC1178 controllers. 1. Preparation Before starting, ensure you have the following: Identify Your Controller : Use a tool like ChipGenius to confirm your USB uses the controller. System Environment
: Use a Windows PC (Windows 10/11 is generally compatible). It is recommended to use a rear USB 2.0 port for a stable power supply.
: Disable antivirus software temporarily, as these tools are often unsigned and may trigger false positives. 2. Download and "Install" FirstChip MPTools is a portable application and does not require a traditional installation process. Obtain the Software
: You can find legitimate versions on specialized sites like
: Unzip the downloaded archive into a folder on your local drive (avoid running it directly from the USB you are trying to fix). 3. Basic Configuration FirstChip_MpTools.exe (or similar executable in the folder) as an Administrator Interface Language
: If the tool opens in Chinese, look for a language dropdown in the top-right corner to switch to Detect Drive
: Insert your USB drive. It should appear in one of the tool's numbered slots. : Click the button (default password is often blank,
: Initially select "Standard Scan." If that fails, some users recommend a "Factory Scan" for deep repairs.
: Ensure the Flash ID matches what was reported by ChipGenius. 4. Execution and Repair : Click the
button on the main screen to begin the low-level formatting and firmware reflashing process. : The tool will cycle through stages: Download FW → Erase → Program → Verify → Format Completion : Wait for the status to turn Green (PASS) . If it turns Red (FAIL)
, check the error code (e.g., Code 31/33 often indicates an unsupported Flash ID). 5. Post-Repair
Once finished, safely remove the drive and re-insert it. Windows should detect it as a new "USB Mass Storage Device" with its original factory capacity restored. specific error code you encountered during the scanning process? FirstChip FC1178/FC1179 MpTools V1.0.5.2 (2022-06-01)
FirstChip FC1178/FC1179 MpTools V1.0.5.2 is a specialized utility used for repairing and restoring USB flash drives that use FirstChip controllers. It is commonly used to fix "Write Protected" errors, "No Media" issues, or to restore the true capacity of fake flash drives. Installation and Initial Setup
Since this is a portable service utility, it does not require a traditional installation process. nPulse.net Download and Extract : Obtain the tool (typically as a archive) from a reliable source like . Extract all files to a single folder on your desktop. FCMpTools.exe as an Administrator. Product Type Selection
: Upon launching, a "Product Type" window may appear. Leave this at the default settings and click Change Language : The initial interface is often in Chinese. Locate the dropdown menu in the top-right corner and select Configuration and Repair Steps
Once the tool is open and your USB drive is connected, it should appear in one of the numbered slots. Access Settings : Click the button. If prompted for a password, try leaving it and clicking OK. Initial Scan (Standard) menu, set the Standard Scan , then click in the main window.
Wait for the scan to finish (this can take up to an hour for larger drives). Factory Reset (If Needed) If the standard scan doesn't resolve the issue, return to and select Factory Scan Navigate to the Final checklist after repair: ✅ Drive visible in
tab and select the option corresponding to your drive's expected capacity (e.g., 16000 for 16GB). to begin the low-level formatting and restoration process. Important Troubleshooting Drive Not Recognized
: If the tool does not see your USB, try a different USB port (preferably USB 2.0) or another version of the tool, such as FirstChip MpTools V1.0.7.2 : Using this tool will permanently erase all data on the USB drive. Controller Part Number for your drive using a tool like ChipGenius? FirstChip FC1178/FC1179 MpTools V1.0.5.2 (2022-06-01)
Introduction
The FirstChip FC1178 and FC1179 are popular chipsets used in various devices, including flash drives, SSDs, and other storage devices. MPTools, short for Multi-Platform Tools, is a software utility used to manage and configure these chipsets. In this article, we will guide you through the process of installing MPTools v1.0.5.2 for the FirstChip FC1178 and FC1179 chipsets.
What is MPTools?
MPTools is a powerful software utility designed to work with FirstChip chipsets, including the FC1178 and FC1179. The tool allows users to configure, update, and manage their devices, ensuring optimal performance and functionality. With MPTools, users can perform various tasks, such as:
Downloading and Installing MPTools v1.0.5.2
To install MPTools v1.0.5.2 for the FirstChip FC1178 and FC1179 chipsets, follow these steps:
Configuring MPTools for FC1178 and FC1179
After installing MPTools v1.0.5.2, you need to configure the software to work with your FirstChip FC1178 or FC1179 chipset.
Common Issues and Troubleshooting
During installation or configuration, you may encounter issues or errors. Here are some common problems and troubleshooting steps:
Conclusion
In this article, we have provided a step-by-step guide on installing MPTools v1.0.5.2 for the FirstChip FC1178 and FC1179 chipsets. By following these instructions, you should be able to successfully configure and manage your devices using MPTools. If you encounter any issues, refer to the troubleshooting section or seek support from FirstChip or a reputable technical support resource.
How to Repair USB Drives with FirstChip FC1178/FC1179 MpTools V1.0.5.2
If your USB flash drive has become inaccessible, shows a "No Media" error, or reports a fake capacity (like a "2TB" drive that only holds 16GB), the FirstChip FC1178/FC1179 MpTools V1.0.5.2 is a specialized mass production tool designed to fix these hardware-level issues. This utility works by communicating directly with the drive's controller to re-flash the firmware and re-evaluate the NAND memory chips. What is FirstChip MpTools?
FirstChip MpTools (also known as i-T117x MpTools) is a low-level service utility for USB controllers. Unlike standard formatting, this tool can:
Restore "Dead" Drives: Fix units that aren't recognized by Windows or show zero capacity. Disclaimer: This guide is for educational and data
Identify Fake Capacity: Detect the true storage size of "scam" flash drives and format them to their actual stable capacity.
Manage Bad Blocks: Scan for and "block out" corrupted sectors of the flash memory to make the drive usable again. Compatible Controllers
The V1.0.5.2 version (released around June 2022) specifically supports the following FirstChip controller models:
FC1178 series: Including FC1178 3D, FC1178 BC, FC1178E, FC1178S, and FC1178AB. FC1179 series: Including FC1179, FC1179S, and FC1179AB.
FC2279 series: Newer versions also include support for FC2279S and FC2279AA. Installation and Setup Guide
Before starting, ensure you have identified your controller using a tool like ChipGenius to confirm it is a FirstChip model. 1. Download and Extraction
Download the archive for FirstChip FC1178/FC1179 MpTools V1.0.5.2 from a reputable technical repository like USBDev.ru or FlashBoot.ru.
Disable Antivirus: Many antivirus programs flag mass production tools as "potentially unwanted programs" (PUPs) because of their low-level hardware access.
Extract: Unzip the folder to your desktop. Look for the executable named FCMpTools.exe. 2. Running the Tool
Launch: Open FCMpTools.exe. When prompted with a "Product Type" window, simply click OK to keep default settings.
Language Setup: The interface may default to Chinese. Look for the Language section in the right-hand column and select English.
Settings Access: If you need to enter the Settings menu, it may ask for a password. Usually, you can simply leave the password field blank and click OK. How to Flash Your USB Drive
Warning: This process will permanently erase all data on the flash drive. FirstChip FC1178/FC1179 MpTools V1.0.5.2 (2022-06-01)
FirstChip’s drivers are not Microsoft-signed. Windows will block them by default.
How to disable temporarily:
Struggling with a USB drive that shows 0 bytes, won’t format, or keeps disconnecting? You’ve likely landed on this page searching for the magic solution: firstchip fc1178 fc1179 mptools v1052 install.
If your USB flash drive has suddenly become a digital paperweight, you are not alone. Millions of cheap (and sometimes branded) USB drives use controller chips from FirstChip—specifically the FC1178 and FC1179 models. These controllers are notoriously finicky and often corrupt their own firmware, leading to a classic “dead drive” scenario.
The good news? The drive is almost certainly recoverable. The bad news? The software to fix it—MPTools (Mass Production Tools) version v1052—is notoriously difficult to find, install, and configure correctly.
In this 2,500-word guide, I will walk you through every single step: from identifying your controller, sourcing the correct v1052 tool, installing the drivers on Windows 10/11, configuring the settings, and finally, performing a full low-level format to bring your flash drive back to life.
Click Save (disk icon) to save the configuration.