Firmware Reset Samsung Ml 2160 2165 2160w 2165w Link May 2026
| Symptom | Likely cause | Solution | |--------|--------------|----------| | Error lights persist after reset | Paper jam, worn fuser, or motor issue | Check for actual hardware failure. | | “Toner Empty” message remains | Toner chip is still at end-of-life | Replace the chip or use a cartridge reset tool. | | Wi-Fi still not working (W models) | Network reset required separately | After factory reset, re-configure Wi-Fi via WPS or USB. | | Buttons unresponsive during reset | Wrong button or timing | Try again. Use “Cancel” button. On some models, try “Power” + “Cancel”. |
This procedure works for all four models: ML-2160, ML-2165, ML-2160W, ML-2165W.
The Samsung ML-2160, 2165, and their wireless variants are workhorses that can serve for a decade if properly maintained. A firmware reset is the most powerful troubleshooting tool in an owner’s arsenal. By mastering the button-sequence hard reset for basic glitches, and knowing how to locate official HP support links for deeper reflashing, users can resolve most “unexplained” errors. However, always approach firmware updates with caution—understanding that a reset clears temporary confusion, while an update may impose permanent restrictions. When in doubt, start with the manual reset; your printer’s longevity depends on it.
This procedure is useful for troubleshooting issues such as:
**Verdict: ** ⭐⭐⭐⭐ (4/5) "The only way to save a dead printer, but not for the faint of heart."
If you own a Samsung ML-2160, ML-2165, ML-2160W, or ML-2165W, you are likely reading this because your printer has stopped working due to a "replace toner" error, even though you just refilled the cartridge. This firmware reset chip/cable is the solution, but it comes with specific caveats.
Once the process is completed successfully, the results are excellent.
This is the most reliable method for a hardware reset.
Result: The printer is now reset to factory default settings.
Performing any kind of reset or firmware update should be done with caution. Always refer to the manufacturer's instructions or contact their support if you're unsure.
Given the dynamic nature of web links, for the most accurate and current information, it's best to navigate directly to Samsung's support page and search for your printer model.
Comprehensive Firmware Reset Guide for Samsung ML-2160, ML-2165, 2160W, and 2165W firmware reset samsung ml 2160 2165 2160w 2165w link
Resetting the firmware on Samsung ML-2160 series printers (including the ML-2165 and wireless "W" models) is a popular solution for users looking to bypass toner chip restrictions. This "fix firmware" allows you to refill original cartridges or use cheaper third-party toner without the printer blocking you with a "toner empty" message. Why Reset Your Samsung Printer Firmware?
Samsung printers use a small chip on the toner cartridge to track page counts. Even if there is physically toner left in the cartridge, the printer may stop working once the chip reaches its pre-set limit. A firmware reset effectively:
Disables Chip Monitoring: The printer will no longer require a functional chip to print.
Reduces Costs: Allows for easy DIY refills or use of non-genuine cartridges.
Resets Counters: Toner levels typically stay at 100% after every restart. Phase 1: Identifying Your Current Firmware
Before downloading any reset links, you must identify your specific printer details. Installing the wrong version can permanently "brick" (disable) your device. Print a Configuration Report:
ML-2160 / ML-2165: Hold the Print Screen button for ~10 seconds until the LED flashes once, then release.
ML-2160W / ML-2165W: Hold the WPS button for ~10 seconds until the LED flashes.
Locate Key Information: Look for these fields on the printed report: Firmware Version (e.g., V1.01.01.05 or V3.00.01.14). Machine Serial Number.
CRUM Number (found on the "Supplies Information" report, printed by holding the button for ~15 seconds until the LED stays green). Phase 2: Finding a Reset Link and "Fix" File
There is no single official link for reset firmware, as these are custom-made "fixes" often provided by third-party services. | Symptom | Likely cause | Solution |
Custom Fix Services: Sites like eReset and ORPYS generate unique firmware files based on your CRUM or Serial Number.
Original Drivers: If you simply need to restore the printer to factory defaults (not bypass toner), you can find official drivers on the HP Support site (which now manages Samsung printer support). Phase 3: Step-by-Step Firmware Installation
Once you have obtained the specific .hd or .exe fix file for your version, follow these steps:
To reset the firmware or the internal counters for the Samsung ML-2160 Go to product viewer dialog for this item.
series (including wireless "W" models), you can use a combination of physical button presses to print status reports and enter a recovery mode. Manual Reset & Report Printing
You can reset the internal page counters and view your current firmware version by following these steps: Print Configuration Report : While the printer is in "Ready" mode, press and hold the Print Screen / WPS button for approximately 10 seconds until the LED flashes once, then release. Print Supplies Information : Press and hold the Print Screen / WPS button for approximately 15 seconds
until the LED stays solid green, then release. This report will show the CRUM number and toner life status. Reset Counters : On some models, a simple power cycle or holding the Stop/Cancel
button for 10–15 seconds until the LEDs flash can reset temporary errors or "toner not recognized" states. Farbtoner.com GmbH Firmware Recovery Mode
If the firmware is corrupted (e.g., after an interrupted update), you can force the printer into Download Mode to reinstall or "reset" the firmware: : Turn off the printer and disconnect the power. Enter Download Mode : Press and hold the Stop/Cancel
(or WPS) button while turning the printer back on. Keep holding the button for about 10 seconds until a green LED appears. Update/Fix
: Once in this mode, you can drag and drop an original firmware file (like ML2160_V1.00.01.xx.hd ) onto the usbprns2.exe utility to reflash the device. Firmware Links & Resources This procedure works for all four models :
For the Samsung ML-2160 and series (including wireless 'W' models), firmware resets are typically used to enable "chipless" printing, allowing you to refill toner cartridges without replacing the expensive electronic chips. Official firmware updates are now managed by HP following their acquisition of Samsung's printer division. Firmware Reset Procedure
To perform a firmware reset, you generally need to put the printer into Download Mode and then apply a "fix" file.
Identify Your Details: Most reset fixes require your printer's Serial Number, Firmware Version, and CRUM number.
Configuration Report: Hold the Print Screen/WPS button for about 10 seconds until the LED flashes once, then release.
Supplies Information: Hold the same button for about 15 seconds until the LED stays green, then release.
Enter Download Mode: Turn the printer off. Hold the Stop/Clear or Print Screen button while turning the power back on. The LED should turn green or orange, indicating it is ready for data.
Apply the Fix: Connect the printer via USB and drag the firmware fix file (usually a .hd file) onto the update executable (like usbprns2.exe).
Finalize: Once the printer reboots, you must remove or cover the chip on the toner cartridge with tape for the reset to take effect. Essential Resources & Links
Official Drivers & Firmware: The official repository for standard updates is now hosted on HP Support.
Third-Party Reset Tools: While not official, sites like eReset and ORPYS provide custom "chipless" firmware fixes and detailed video tutorials.
Technical Guides: Detailed PDF release notes and manual update instructions can be found on Scribd.
Caution: Using non-official "fix" firmware can void your warranty and, if interrupted, may render the printer unusable ("bricking"). Ensure you have a stable power connection before proceeding.