Reset Samsung M2020w Free: Firmware

A firmware reset (often called a “factory reset” or “hard reset”) restores the printer’s internal software to the state it was in when it left the factory. It clears:

Why choose a free method? Many third-party tools or “printer maintenance services” charge $20–$50 for a reset. However, Samsung (now owned by HP) built a hidden button sequence directly into the M2020W’s firmware. Using this is 100% free, safe, and takes less than 60 seconds.

Try a cold reset (sometimes called a hard reset):

This doesn’t reset firmware, but it clears temporary glitches that might look like firmware issues.

A: Yes. Demo mode is a firmware configuration. The button reset restores standard user mode.

Here’s a draft for a blog post titled “How to Perform a Firmware Reset on a Samsung Xpress M2020W (Free & Easy)” — written in a helpful, clear, and search-friendly style. firmware reset samsung m2020w free

We just reset the settings (NVRAM). This does not downgrade your firmware version. If you have a corrupt firmware file (the operating system of the printer), this button reset won't fix it. But for 99% of M2020W "I forgot my password" or "Wi-Fi won't connect" problems? This works like magic.

Have a different error? Drop a comment below with the code showing on your screen.

Disclaimer: This is a user-supported guide. Always refer to your manual. Resetting your device will delete saved networks.

Liked this post? Pin it to your printer board so you can find it next time your M2020W acts up.

A "firmware reset" for the Samsung Xpress SL-M2020W typically refers to one of two things: a standard factory reset to clear settings or a "Fix Firmware" (chipless reset) designed to bypass toner chip restrictions. 1. Standard Factory & Network Reset (Free) A firmware reset (often called a “factory reset”

This method clears your custom settings, such as Wi-Fi credentials or printer configurations. It is completely free and uses the physical buttons on the device. Hard Reset Procedure: Ensure the printer is powered On.

Press and hold the Stop/Cancel button for approximately 10–15 seconds. Release the button once the LEDs begin to flash. Restart the printer to complete the process.

Wi-Fi Reset: To clear only network credentials, hold the WPS button for about 5 seconds until the LED blinks. 2. "Fix Firmware" (Chipless Reset)

This is a permanent modification to the printer's internal software. It allows the printer to function without the digital chips found on Samsung MLT-D111 toner cartridges , essentially making the printer believe the toner is always at 100%.

Warning: This process often involves third-party software and can void your manufacturer's warranty. How it Works: Why choose a free method

Identify Details: You must first print a "Configuration Report" and "Supplies Information" page to find your printer's Serial Number, Firmware Version, and CRUM number. To do this, hold the WPS button until the LED blinks, then release.

Download "Fix" File: Specialized firmware files are typically generated based on your specific CRUM/Serial number. While some older "free" versions might exist on forums, most reliable versions from sites like eReset or INKCHIP often require a small fee (around $13–$16) to generate a unique file for your device.

Installation: You connect the printer via USB and drag the customized .hd firmware file onto a provided usblist2.exe tool to flash the printer.

Final Step: Once flashed, you must physically cover the gold contacts on the toner chip with tape. 3. Official Firmware Updates

Here are a few variations of a review related to resetting the Samsung M2020W firmware for free, written from different perspectives (Success Story, Technical/Cautious, and Short/Simple).

✅ Success indicator: The printer will return to a “ready” state with a solid green LED. All previous Wi-Fi settings are erased.