Epson L5190 Adjustment Program Reset Tool

Do not run the tool immediately. Follow these preparation steps to avoid disaster.

The Epson L5190 is an EcoTank all-in-one inkjet printer designed for high-volume, low-cost printing. Like all Epson inkjet printers, it includes a maintenance box (waste ink pad) that absorbs excess ink during printhead cleaning and borderless printing. The printer tracks the estimated fill level of this pad using an internal counter. When this counter reaches a predetermined limit (usually near 100%), the printer displays a “Service Required” error (e.g., “Parts inside your printer are at the end of their service life”) and stops functioning until the counter is reset via a proprietary service tool.

The Epson L5190 Adjustment Program is an authorized service utility (often leaked or reverse-engineered for end-user use) that resets this waste ink counter.

---

Epson's Intellectual Property Notice:
The Adjustment Program contains copyrighted code and trade secrets for memory addressing. Distributing it violates the Digital Millennium Copyright Act (DMCA) in the U.S. and similar laws globally. In 2023, Epson sent cease-and-desist letters to two major reset tool aggregators, forcing them offline. epson l5190 adjustment program reset tool

Malware Epidemic:
Because the tool requires administrator privileges and USB driver access, it has become a favorite vector for malware distribution. Security firm BitDefender reported in Q4 2025 that over 60% of "Epson L5190 reset" executables found on torrent sites contained either a remote access trojan (RAT) or a crypto miner. One variant replaced the printer's firmware with a botnet node.

Bricking Risk:
The tool has no "undo" button. If you accidentally click "Head ID Initialization" without a new printhead installed, the printer will store random calibration values. The result: perfect mechanical operation but permanently misaligned printing (banding and ghosting). Recovery requires a main board replacement, which costs more than the printer.

---

| Component | Description | |-----------|-------------| | Waste Ink Pad | Absorbent felt pad inside the printer base. | | Counter Limit | Epson sets ~15,000–20,000 cleaning cycles or power cleans; varies by model. | | Error Code | “Service Required” or error code 0x9A, 0x9B, 0x69 (depending on firmware). | | Official Solution | Replace waste ink pad + reset counter using Epson’s Adjustment Program (service centers only). | | Unofficial Solution | Third-party reset tools using the same protocol (often called “AdjProg” or “WICReset”). | Do not run the tool immediately

---

Using unofficial or improperly obtained versions of the Epson L5190 Adjustment Program carries significant risks:

| Risk | Description | |------|-------------| | Physical Ink Overflow | If waste ink pads are already saturated, resetting the counter without replacing/cleaning pads can cause ink leakage into the printer chassis, damaging electronics. | | Voided Warranty | Unauthorized use of service tools voids Epson’s warranty. | | Firmware Corruption | Poorly patched or incorrect tool versions can corrupt printer NVRAM, permanently bricking the device. | | Malware Risk | Many “free” reset tools found on forums or file-sharing sites contain trojans, keyloggers, or ransomware. | | Region Locking | Incorrect destination setting may disable certain ink cartridges or Wi-Fi functions. |

---

EEPROM Manipulation: The tool reads and writes data to the printer’s non-volatile memory (EEPROM), storing serial numbers, page counts, and maintenance history. not your desk.

Important: This is not a firmware update. It is a low-level service utility that bypasses normal user restrictions.

---

For $10-20 on eBay or AliExpress, you can buy a waste ink tank kit:

This way, overflow goes into a bottle you empty, not your desk.

---