| Problem | Solution |
|---------|----------|
| "Communication error" | Use USB 2.0 port, not USB 3.0 |
| Program crashes on launch | Run as Admin + disable antivirus temporarily |
| License key not accepted | Try www.2manuals.com as password/key |
| Printer still shows error | Reset EEPROM via EEPROM data copy tab |
| Error Message | Solution | |---------------|----------| | “Communication error” | Printer is not in service mode. Re-enter service mode. Or change USB port. | | “Timeout error” | Disable firewall and antivirus completely. Run as admin. | | “Counter overflow” | The physical waste pad is full. You must clean or replace the pad before resetting. | | “Wrong model” | You downloaded a program for L3110 or L3150. Find the exact L3118 version. | epson l3118 resetter adjustment program install
After the initialization is complete, turn off the printer using the power button. Wait a few seconds, turn it back on, and attempt a test print. The "Service Required" error should be resolved. | Error Message | Solution | |---------------|----------| |
Before diving into the installation, it is critical to understand what this software does. An Adjustment Program is a proprietary service tool designed by Epson for technicians. It allows you to: Before diving into the installation, it is critical
Important Warning: Using this program voids your warranty if the printer is still under service coverage. It also does not physically clean the waste ink pads. You must either replace the pads or install a waste ink tank externally to prevent ink overflow.
The Epson L3118 Adjustment Program (commonly called a resetter) is a service tool that:
⚠️ Note: This is not an official Epson consumer tool. It’s a leaked service utility. Use at your own risk.