Epson L3115 Printer Resetter Adjustment Program Install May 2026

The adjustment program does not work through the standard Windows printer driver. It uses a low-level USB communication protocol. Here’s how to prepare:

Developing and Installing an Adjustment Program for Epson L3115 Printer Resetter: Implementation, Risks, and Legal Considerations

Even with perfect steps, you may encounter errors. Here’s how to fix them:

| Error Message | Cause | Solution | |---------------|-------|----------| | "Communication error (Code 20000010)" | USB connection interrupted | Disable power saving on USB ports. Reconnect cable. Restart printer. | | "Load Fatal Error – AdjProg.exe" | Missing runtime DLL files | Install Microsoft Visual C++ Redistributables (2015–2022). | | "Printer model not found" | Wrong driver mode | Go to Device Manager > Uninstall printer > Reinstall Epson L3115 driver. | | "Counter reset failed – Check sum error" | Printer EEPROM locked | Reboot printer. Run the tool as Admin. Disable antivirus completely. | | "Waste ink pad is full. Please contact service." (still appears) | You reset only one counter | Reset BOTH main pad counter AND platen pad counter. |

Epson L3115, resetter, adjustment program, maintenance counter, firmware, reverse engineering, driver installation, printer servicing, legal compliance, risk mitigation

Below is a concise, practical guide to installing and using an adjustment (resetter) program for the Epson L3115 printer to reset waste-ink counters and perform basic service adjustments. This covers typical steps and precautions; adapt paths and filenames to the specific resetter package you have.

Important precautions

Requirements

Step 1 — Install or update Epson drivers

Step 2 — Prepare the resetter package

Step 3 — Run the resetter with correct privileges

Step 4 — Put the printer into service mode (if required)

  • The resetter should now show the printer model and connection status.

    • Step 5 — Reset waste-ink counters / perform adjustments

    Step 6 — Verify and test

    Troubleshooting

    Legal and ethical note

    If you want, I can:

    The Epson L3115 Adjustment Program, commonly referred to as a "resetter," is a specialized diagnostic utility used to resolve the "Service Required" or "Ink Pad Full" error that occurs when a printer's internal waste ink pad counter reaches its limit. While this software can restore a printer's functionality, it is an unofficial maintenance tool that requires careful installation and use. Purpose and Functionality

    Epson printers like the L3115 are designed with internal pads to collect excess ink during head cleaning and printing. Once the software's internal counter determines these pads are nearly full, the printer ceases operation to prevent ink leakage, often signaling this with flashing red lights. The Adjustment Program allows users to:

    Reset Waste Ink Counters: Return the "Main Pad Counter" or "Platen Pad Counter" back to 0% to resume printing.

    Diagnose Status: Read the current counter values and printer status.

    Perform Maintenance: Run deep printhead cleanings and nozzle tests. How to Install and Use the Resetter

    Using the Epson L3115 resetter typically involves downloading the utility from third-party sites like Inkchip or WIC Reset Utility, as Epson does not officially distribute it to consumers.

    To reset the waste ink pad counter on your Epson L3115 printer, use the model-specific Epson Adjustment Program. This process will instantly clear the "Service Required" error and resolve the alternating blinking red lights on your machine. How to Install and Use the Epson L3115 Resetter Go to product viewer dialog for this item.

    Follow this step-by-step guide to download, install, and execute the adjustment program safely. 🛑 Step 1: Prepare Your Computer

    Connect your printer to your PC using a functional USB cable.

    Turn on the printer and make sure no other print jobs are pending.

    Temporarily disable your antivirus software. Because these utility tools are third-party service programs, Windows Defender or antivirus programs frequently flag them as false positives. 📥 Step 2: Download and Extract the Software

    Find a trusted source online or use a known utility site like the WIC Reset Utility to acquire the tool. Download the compressed file (usually .zip or .rar).

    Extract the contents to a folder on your desktop using a program like WinRAR. ⚙️ Step 3: Run the Epson Adjustment Program

    Open the extracted folder and look for the AdjProg.exe file. Right-click on it and choose Run as administrator.

    If a hardware ID or activation key prompt pops up, follow the instructions provided by the specific software vendor to generate or enter your key. 🔄 Step 4: Reset the Waste Ink Pad Counter

    Once the program interface opens, click on the Select button. Choose Go to product viewer dialog for this item. epson l3115 printer resetter adjustment program install

    from the model name dropdown menu and leave the port on Auto selection, then click OK. Click on the Particular adjustment mode button.

    From the list of operations, locate and double-click Waste ink pad counter, then click OK.

    Check the boxes next to Main Pad Counter and Platen Pad Counter. Click the Check button to verify how full the counters are.

    Check both boxes again, and this time click the Initialization button.

    A pop-up will ask for permission; click OK to execute the reset. 🏁 Step 5: Finalize the Process The program will prompt you to turn off your printer.

    Push the physical power button on the printer to shut it down, then click OK on the program screen. Turn your printer back on.

    The red blinking lights should now stop, and your printer status will return to normal!

    ⚠️ Disclaimer: The reset utility clears the digital safety counter. However, the physical waste ink pads will still be saturated with ink. To prevent physical ink leaks on your desk, it is highly recommended to physically clean or replace the waste ink sponge inside the machine as soon as possible.

    How to Download Epson Adjustment Program? #911488 - Ask Extension

    Before diving into the installation process, let’s clarify what this software actually does.

    The Adjustment Program (often called a resetter or service utility) is a proprietary software tool designed for service centers to reset the printer’s internal counters. For the Epson L3115, it primarily resets:

    Important Note: Using an adjustment program does not physically clean the waste ink pad. It only resets the counter. For long-term health, you should also physically clean or replace the waste ink pad.

    If you want, I can:

    To install and use the Epson L3115 Resetter (Adjustment Program), follow these steps. This utility is primarily used to clear the "Service Required" error caused by a full waste ink pad counter. 1. Download and Prepare the Software Locate the Utility

    : Download the Epson L3110/L3115 Adjustment Program from a reliable source like Chipless Printer Forum Disable Antivirus

    : Temporary disable your antivirus or Windows Defender, as these programs are often flagged as false positives. Extract Files : Use a tool like The adjustment program does not work through the

    to extract the downloaded folder. Many community-provided versions use the extraction password adjprogram.com 2. Connect the Printer Ensure your Epson L3115 is turned on and connected directly to your computer via a

    Avoid using a USB hub or wireless connection for this process to ensure stability. BCH Technologies 3. Run the Adjustment Program Open the App : Right-click Adjprog.exe and select Run as administrator Select Model : Click the button. In the "Model Name" dropdown, choose

    (or L3110 if L3115 isn't explicitly listed, as they share firmware). Port Selection : Keep the "Port" setting on Auto Selection

    or manually select the USB port labeled with your printer's name. Click Enter Adjustment Mode Particular Adjustment Mode 4. Reset Waste Ink Pad Counter Find the Counter Waste ink pad counter from the list and click Check Status : Check the box for Main pad counter (and "Platen pad counter" if available) and click to see the current usage percentage. Initialize

    : Once the counter shows it is full (100%), check the boxes again and click Initialize : A prompt will ask you to turn off the printer. Power off the printer , then click

    in the software. Turn the printer back on; the blinking red lights should be gone.

    : Resetting the software counter does not physically clean the ink pads. For a permanent fix, you should manually clean or replace the waste ink pads to prevent internal ink leakage. wic-reset.com video tutorial for a visual walkthrough of these steps? HOW TO RESET EPSON L3251 PRINTER

    Epson L3115 Adjustment Program , commonly known as a "resetter," is a specialized utility used to fix the "Service Required" error that occurs when a printer's internal waste ink pads are full. This error typically stops all printing and is indicated by blinking red lights on the device. Prerequisites and Setup

    Before installing or running the software, ensure the following conditions are met: Printer Connectivity : The printer must be connected to your computer via USB. Driver Installation

    : Ensure the correct printer drivers for the L3115 are installed on your computer. Disable Antivirus

    : Many third-party adjustment programs are flagged as false positives; it is often necessary to temporarily disable real-time protection in Windows Defender or other antivirus software before extraction. Extraction

    : Use a tool like WinRAR or 7-Zip to extract the downloaded files. Installation and Activation Steps

    While specific resetter versions may vary, the general process follows these steps: Open the Application : Locate and run AdjProg.exe from the extracted folder. Activation (If Required)

    : If an error or license ID prompt appears, you may need to use a "Keygen" or license manager included in the download to generate a unique license key based on your computer's hardware ID. Program Selection : Once open, click

    and choose "L3115" from the Model Name dropdown menu. It is recommended to select the specific printer port rather than "Auto selection". How to Reset the Waste Ink Pad Counter To clear the "Service Required" error:

    Here’s a helpful feature idea for users trying to install the Epson L3115 resetter / adjustment program — a common but tricky task due to driver signing, Windows updates, and firmware restrictions. Requirements

    A small standalone utility that walks the user step-by-step through installing the Epson L3115 Adjustment Program (resetter) safely and successfully.