Before downloading, it is important to clarify the model name. "Canon F151 300" is the internal production code for the Canon imageCLASS MF3010.
When searching on the official Canon website, you likely will not find results for "F151 300." You must search for "MF3010" to find the correct software.
Inside many Canon printers (MF4770n, MF4880dw, MF4570dw, etc.), there is a Conexant chipset labeled "F151-300." This chip handles PC Faxing—allowing you to send a document from your computer directly through the printer's phone line.
When you install Windows 10 64-bit cleanly, Windows Update often pulls a generic "Conexant Soft Data Fax Modem" driver, but it frequently fails with Code 10 (Device cannot start) or Code 31.
The Canon imageCLASS MF3010 is an older legacy device. It was originally released during the Windows 7 and Windows 8 era.
If you don't use the fax function, disable the device in Device Manager. Leaving a misconfigured "Driver May" error in Device Manager can cause your PC to hang during shutdown or sleep cycles.
Have a different Canon modem chip (F152, F154)? The same Conexant generic trick usually works. Leave a comment below with your hardware ID if you are stuck.
Disclaimer: Forcing unsigned or generic drivers may violate your organization's IT policy. Use the "Disable Signature Enforcement" method only as a last resort. Driver May In Canon F151 300 Win 10 64bit
Canon F151300 is a regulatory model number that corresponds to several commercial models, most commonly the Canon LaserShot LBP3100B Canon LaserShot LBP3000
. To find the correct driver for Windows 10 (64-bit), you should search for the driver using these specific commercial names rather than the Commercial Model Cross-Reference
label is often found on the back of the machine, while the commercial name is usually printed on the front : Identified by the device ID USBPRINT\CanonLBP3000172A
: A monochrome laser printer with a print resolution of 600 x 600 dpi. How to Find and Install the Driver
The Canon F151300 is actually the regulatory model number for the Canon LaserShot LBP3000 or
. To get this working on Windows 10 (64-bit), you need the CAPT (Canon Advanced Printing Technology) driver. Required Driver for Windows 10 (64-bit)
You can find the official software on the Canon Support Page. Model Name to Search: LBP3000 or LBP3100B Driver Version: R1.50 Ver.3.30 (or newer) File Format: Usually an .exe self-extracting file Installation Steps Before downloading, it is important to clarify the
Disconnect the USB: Unplug the printer from your computer before starting the installation.
Download & Extract: Download the 64-bit driver and double-click the file to extract it into a new folder. Run Setup: Open the extracted folder and run Setup.exe.
Connect Printer: Follow the on-screen prompts; only plug in the USB cable when the installer specifically asks you to do so.
If the standard installer fails, you can try adding it manually through Windows Settings by selecting "Printers & Scanners" > "Add a printer or scanner" and pointing the "Have Disk" option to the folder you extracted.
[Windows 64bit] LBP3000 CAPT Printer Driver (R1.50 Ver.3.30)
Canon F151300 is the manufacturing code for the Canon LaserShot LBP3000
. To get your printer working on Windows 10 (64-bit), you should download the official drivers for these specific model names rather than searching for the "F151300" code. A1 Used Computers Driver Download & Setup Identify Your Model : Check the front or top of your printer. It is likely the Canon LaserShot LBP3000 Download Official Drivers CAPT Printer Driver R1.50 Ver.3.30 , which officially supports Windows 10 64-bit. : Visit the Canon Support Page and search for "LBP3100". Installation Tips Unplug USB Inside many Canon printers (MF4770n, MF4880dw, MF4570dw, etc
: Disconnect the printer from your PC before starting the installation. Run as Admin : Right-click the downloaded file and select "Run as administrator".
: Only plug the USB cable back in when the installer prompts you to do so. Canon Vietnam Manual Update Method
If the installer doesn't work, you can try updating through Windows: Printers & Scanners Add a printer or scanner If it isn't found, click "The printer that I want isn't listed"
and choose to add it manually using the driver files you downloaded. University of Colorado Boulder for a specific version of this printer?
A: In many regions (Asia Pacific, Middle East), yes. The drivers are interchangeable. Download the C350i driver if F151 isn't listed.
A: Windows 10’s Protected Print Mode sometimes flags older Canon drivers. Disable it via:
Settings → Bluetooth & devices → Printers → Canon F151 → Printer properties → Advanced → Enable "Direct Printing"
UFRII_Driver_V2.xx_W64.exeAlternative: Use Canon’s Generic Plus UFR II Driver – works with nearly all Canon printers.
Do not download the full Canon MF driver pack. Instead, we need the generic modem driver that Microsoft buried.