Antes de comenzar, asegúrate de tener lo siguiente:
El sistema a veces bloquea dial-up. Use RasPhone:
Instale wvdial y edite /etc/wvdial.conf: Como Configurar Un Modem Axesstel Cdma 1xev-do
[Dialer Axesstel]
Modem = /dev/ttyUSB0 (o ttyACM0, verifique con dmesg)
Baud = 115200
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = AT+CRM=1
Phone = #777
Username = web
Password = web
Stupid Mode = 1
Luego ejecute sudo wvdial Axesstel.
Si el módem usa perfil de marcador (dial-up): Antes de comenzar, asegúrate de tener lo siguiente:
Si el módem usa perfil de red móvil en panel web:
Once connected:
If you still have issues, note that many CDMA networks (e.g., Sprint’s 3G, Verizon’s 3G) have been shut down. The configuration works only if your carrier still operates CDMA 1xEV-DO in your region (e.g., some Latin American or Asian carriers as of 2025).
Since the specific interface can vary slightly depending on the model (e.g., MV400, MV410, AXW-D800) and the internet service provider (ISP), this guide covers the standard procedures used for 95% of these devices. El sistema a veces bloquea dial-up
For desktop or router-style Axesstel units (e.g., PX500):