The final page of the Bushnell manual is a goldmine of real-world fixes. Here are three gems often forgotten:
Overall Rating: 4.5/5
Best for: Beginner to intermediate hunters, .22 plinkers, and full-size rifle owners on a budget.
The Scope The Bushnell 3-9x40EG is a staple in the hunting community. It offers the universal magnification range (3-9x) for short to medium-range shots and a 40mm objective lens for excellent light gathering at dawn/dusk. The "EG" typically denotes the Multi-X crosshair reticle and exposed, finger-adjustable turrets.
Pros:
The Manual (Key Focus) Unlike many scopes that come with a confusing, one-sheet "quick start" guide, the Bushnell 3-9x40EG manual is a standout. It's a 12-16 page booklet (or PDF) that actually teaches you:
Cons:
Final Verdict Buy the scope for its rugged reliability. Read the manual for its no-nonsense guidance on mounting and zeroing. It’s one of the few accessory manuals you won’t throw in a drawer. bushnell 3-9x40eg manual
Tip: Download the PDF from Bushnell’s site – the digital version lets you zoom into the torque specs for mounting rings.
The 3-9x40eg is typically a "parallax fixed" scope, set for 100 yards. This means at 9x power, if your eye moves behind the scope, the crosshairs might shift slightly. The manual instructs you to always center your eye behind the scope for maximum accuracy.
Before you start turning dials, you need to know what you are holding. The model name tells you everything: The final page of the Bushnell manual is
The Key Components:
The "40" in 3-9x40EG refers to the objective lens diameter. The manual clarifies a point of confusion: This scope is factory-set parallax-free at 100 yards.
A common question for owners of this model is: "Why is the reticle blurry?" Problem: Scope won't hold zero
The 3-9x40EG typically features capped, finger-adjustable turrets (1/4 MOA per click). The manual provides the crucial "Set Screw" procedure:
This allows you to dial back to your exact zero even after field adjustments. Lose the manual, and you might strip that tiny set screw using the wrong tool (often a 1.5mm or 2mm hex key, as noted in the manual).