Clock Radio Manual Work - Audiosonic Caa-09169

Cause: Spills or dust.
Fix: Unplug the unit. Use a contact cleaner spray (like DeoxIT) or 90% isopropyl alcohol on a Q-tip to clean around the button edges. Let dry for 1 hour before powering on.

A: Check the label on the AC adapter. If it says "Input: 100-240V, 50/60Hz," yes. If it says "120V only," you need a voltage converter.

Follow the exact same steps as above, but replace ALARM 1 with ALARM 2 button. Audiosonic Caa-09169 Clock Radio Manual WORK

Use the following steps verified for the CAA-09169 logic:

| Step | Action | |------|--------| | 1 | Press and hold the TIME SET button (often labeled "CLK SET" or "TIME"). | | 2 | While holding, press the HOUR button (may be marked with an arrow up) to advance hours. Observe AM/PM indicator (LED dot or "AM" icon). | | 3 | While still holding TIME SET, press the MINUTE button to advance minutes. | | 4 | Release TIME SET to finalize. | Cause: Spills or dust

✅ Working tip: If the time flashes, the device is in setting mode – simply repeat the above.

⚠️ Common issue: No FM reception? Extend the built-in wire antenna (back panel). AM uses internal ferrite bar – rotate the radio for best reception. ✅ Working tip: If the time flashes, the

Many users complain about an overly bright display keeping them awake. The Audisonic CAA-09169 manual lists a brightness control:

If your unit has no Dimmer button, check the Snooze button – on some revisions, holding Snooze for 2 seconds toggles brightness.