⚠️ Note: The first launch will compile PPU/SPU modules. This takes 5–10 minutes. Do not close RPCS3 during this process.
For nearly two decades, the Army of Two franchise has maintained a cult-classic status. The over-the-shoulder bromance, the magnetic customizable masks, and the aggressive "Aggro" mechanic created a split-screen co-op experience that few games have replicated since. However, for PC gamers, the series has been frustratingly out of reach—officially.
Enter the world of emulation. With the power of the RPCS3 (PlayStation 3 emulator) and the preservation work of communities like Gnarly Repacks, you can finally play Army of Two: The 40th Day and Army of Two: The Devil’s Cartel with all Downloadable Content (DLC) unlocked. This guide covers everything you need to know about obtaining, installing, and optimizing the "Army of Two - RPCS3 DLC - Gnarly Repacks" package.
No surveys. No passworded archives. No missing DLC.
Just a straight repack of the most chaotic co-op shooter of the PS3 era—fully armed and ready for two players to raise hell.
Get in. Get paid. Get gnarly.
Search for “Army of Two Gnarly Repacks” on your favorite torrent site or direct archive.
Hash (SHA-1) included in release folder for verification.
Army of Two: The 40th Day - RPCS3 DLC - Gnarly Repacks
The year was 2010, and the world of gaming was abuzz with the release of Army of Two: The 40th Day, a third-person shooter developed by Visceral Games and published by Electronic Arts (EA). The game was initially released for the PlayStation 3 and Xbox 360 consoles, offering a unique co-op experience that allowed two players to team up and take on the role of two private military contractors, Elliot Cross and Todd Lynch.
Fast forward to the present day, and the game has become a classic, with many gamers still fondly remembering the intense action and camaraderie that Army of Two: The 40th Day provided. However, with the passage of time, the original console hardware has become outdated, and the game has become increasingly difficult to play on modern systems.
That is where RPCS3, a popular PlayStation 3 emulator for PC, comes into play. With RPCS3, gamers can now play Army of Two: The 40th Day on their modern computers, enjoying improved graphics and performance. But that's not all - the emulator also allows for the use of DLC (Downloadable Content) packs, which were originally released for the game.
One such DLC pack is the "Co-op Chaos" pack, which added new multiplayer modes, maps, and characters to the game. Another is the " Gun Slingin'" pack, which introduced new guns and customization options. These DLC packs were originally released for the console versions of the game but can now be enjoyed on PC through RPCS3.
Now, when it comes to downloading and installing these DLC packs for Army of Two: The 40th Day on RPCS3, things can get a bit tricky. That's where Gnarly Repacks comes in - a popular repackaging group known for their high-quality game and DLC packs.
Gnarly Repacks: A Brief Introduction
Gnarly Repacks is a well-known group in the gaming community, famous for repackaging games and DLCs into convenient, easy-to-install packages. Their repacks are highly sought after by gamers, as they often include all the necessary files, including cracks, patches, and DLCs, making it easy for gamers to get started with their games.
In the case of Army of Two: The 40th Day, Gnarly Repacks offers a comprehensive repack that includes the base game, as well as all the available DLC packs, including the "Co-op Chaos" and "Gun Slingin'" packs. This means that gamers can enjoy the complete Army of Two: The 40th Day experience, with all the extra content, on their PC via RPCS3.
Installing Army of Two: The 40th Day and DLC on RPCS3 using Gnarly Repacks
So, how do you get started with Army of Two: The 40th Day and its DLC packs on RPCS3 using Gnarly Repacks? Here's a step-by-step guide:
Conclusion
Army of Two: The 40th Day is a classic game that still offers a fun and intense co-op experience, even years after its initial release. With RPCS3 and Gnarly Repacks, gamers can now enjoy the complete game, including all the available DLC packs, on their modern PCs.
The Gnarly Repacks team has done an excellent job of packaging the game and DLCs, making it easy for gamers to get started with their Army of Two: The 40th Day experience. If you're a fan of the game or just looking for a new co-op experience, be sure to check out Army of Two: The 40th Day on RPCS3 using Gnarly Repacks.
Additional Tips and Troubleshooting
By following these steps and tips, you'll be able to enjoy Army of Two: The 40th Day with all its DLC packs on your PC via RPCS3, using the convenient Gnarly Repacks. Happy gaming!
Army of Two (+RPCS3, DLC) [Gnarly Repacks] is a pre-configured version of the cooperative shooter designed for play on PC via the RPCS3 emulator
. This specific repack typically includes the base game and its relevant Downloadable Content (DLC) in a compressed format (approximately 3.27 GB). Included Content & Features
: Centered on two mercenaries, Salem and Rios, the game emphasizes cooperative tactical maneuvers and "Aggro" management to defeat enemies. DLC (Chapters of Deceit) : Most versions of these repacks for Army of Two: The 40th Day
include the "Chapters of Deceit" DLC, which adds two additional story chapters (Chapters 8 and 9). Pre-Configured Emulator
: Gnarly Repacks often bundle a specific version of RPCS3 with the game files, allowing the user to run an installer (.exe) rather than manually setting up the emulator. Installation Overview
: Download all split compressed files and extract the first part (e.g., using ), which should automatically extract the rest. : Open the resulting folder and run the
or similar executable to install the game and emulator as a standard PC application. DLC Activation : If the DLC is not pre-installed, you can manually install files by dragging them into the RPCS3 interface or using File > Install Packages/Raps/Edats License Files : Ensure that
files (license files) are included. For the emulator to recognize them, they must be in the correct directory (usually /dev_hdd0/home/00000001/exdata/ Technical Tips Army of Two (+RPCS3, DLC) [Gnarly Repacks] [3.27 GB]
The story behind the Army of Two series follows the high-stakes careers of mercenaries Elliot Salem and Tyson Rios as they navigate a world of private military contracts, global conspiracies, and devastating urban warfare. The Original War (1993–2009)
The saga begins in Somalia in 1993, where U.S. Rangers Elliot Salem and Tyson Rios are recruited into the Security and Strategy Corporation (SSC)
by their commander, Richard Dalton. Over the next 16 years, the duo executes high-profile assassinations and missions across Afghanistan, Iraq, and North Korea. However, they eventually discover they are pawns in a conspiracy led by Dalton to privatize the U.S. military. After uncovering the truth and defeating Dalton, the pair breaks away to form their own independent PMC, Trans World Operations (T.W.O.) The 40th Day (Shanghai Disaster)
A year later, Salem and Rios are on a routine mission in Shanghai when the city is suddenly leveled by a massive, coordinated terrorist attack orchestrated by the 40th Day Initiative
. Trapped in the crumbling metropolis, they must fight their way through mercenary-controlled ruins to escape. Along the way, the duo faces moral dilemmas—such as choosing to rescue or abandon civilians—that impact their gear and immediate survival.
Army of Two: The 40th Day (2010) | One step forward, one step back
The Army of Two - RPCS3 release from Gnarly Repacks typically bundles the base game with its available downloadable content (DLC) and updates, pre-configured for use with the RPCS3 emulator. Included Content
Depending on which game in the series is included in the repack, you can expect the following DLC: Army of TWO (2008)
: Often includes the Veteran Map Pack, which adds two campaign maps (including a co-op mission in Kiev's subway) and an alternative ending where Salem and Rios take on Dalton at SSC's Miami headquarters. Army of TWO: The 40th Day Army of Two - RPCS3 DLC- -Gnarly Repacks-
: Typically includes the Chapters of Deceit DLC, which adds Chapters 8 and 9 to the campaign. This DLC is often played after completing the main story and fills in gaps between the hospital level and the finale Army of TWO: The Devil's Cartel
: Often bundled with the Overkill Edition content, featuring the "Double D" shotgun, TAH-9 machine-pistol, specialized tactical gear (Overkiller and Dia De Los Muertos kits), and additional co-op missions. RPCS3 Compatibility & Installation Army of Two: Veteran Map Pack [Xbox 360] – Review
Aggro & Emulation: Reviving Army of Two with RPCS3 By the Gaming Preservation Desk | April 16, 2026
If you grew up in the mid-2000s, you remember the "Aggro" system. Before everything was a battle royale, Army of Two
was the king of couch co-op. Fast forward to 2026, and since EA has kept the series on ice without a remake, the community has taken preservation into its own hands.
Today we’re looking at how to get the definitive experience—including the elusive DLC—running on the RPCS3 emulator using "Gnarly Repacks." The State of the Game in 2026 As of April 2026, Army of Two: The 40th Day and the original Army of Two are performing better than ever. Thanks to a massive 2026 RPCS3 update
that optimized SPU usage, these titles now run smoothly on mid-range hardware like the RTX 2060. Performance Tiers: RTX 3080 / RX 6800 for consistent 4K gameplay. RTX 4070 for pushing high-refresh rates at 4K. The "Gnarly Repack" Advantage
"Gnarly Repacks" have become a community favorite because they often bundle the RPCS3 emulator
directly with the game files, pre-configured for the best experience. What’s inside the Army of Two pack? Base Game: Pre-patched for stability. DLC (Chapters of Deceit):
Finding this DLC manually on ROM sites is notoriously difficult—most only offer the 4GB base game. Gnarly's version typically includes the necessary license files needed to unlock these extra missions. Emulator Portability:
Many of these repacks are "portable," meaning you don't need a complex install—just extract and run the Pro-Tips for Installation
Even with a repack, emulating the PS3 can be finicky. Here is the 2026 "Cheat Sheet" for a smooth setup:
Army of Two running with its DLC using a Gnarly Repacks release on the
emulator, you typically follow a standard installation process that combines a traditional Windows-style installer with standard emulator package management. 1. Initial Extraction & Installation
Gnarly Repacks often distribute PS3 games as self-contained Windows installers.
Download all parts of the repack and extract the first part (e.g., .part1.rar ) using 7-Zip or WinRAR. Run Installer: Open the extracted folder and run the
installer. This will install a pre-configured version of RPCS3 along with the game files to a directory of your choice. Steam Deck Note: If installing on a Steam Deck, you may need to use to run the
, or manually move the game files into a standard RPCS3 installation. 2. Adding DLC & Updates
If the DLC is not pre-installed or you have separate files (like the "Chapters of Deceit" pack), follow these steps in RPCS3: Locate Files: Ensure you have the (the content) and the (the license) files. Install PKG: In RPCS3, go to File > Install Packages/Raps/Edats and select your DLC Activate RAP: Drag and drop the
file directly into the RPCS3 window. Alternatively, manually copy it to dev_hdd0/home/00000001/exdata/ within your RPCS3 folder. Case Sensitivity: Ensure the RAP file extension is lowercase (
). Some versions of the emulator or certain game configurations may fail to recognize uppercase extensions. 3. Verification & Troubleshooting
Looking for Army of Two The 40th Day DLC "Chapters of Deceit"
For Army of Two (specifically The 40th Day) using the Gnarly Repacks version on the RPCS3 emulator, follows these steps to ensure the DLC and game files are correctly set up and accessible. 1. Installing the Base Game (Gnarly Repacks)
Gnarly Repacks for RPCS3 typically come as a self-installing executable rather than loose files.
Run the Installer: Execute the .exe file included in your download.
Installation Path: The installer will typically provide a pre-configured version of RPCS3 along with the game files.
Alternative (Loose Files): If you prefer using your own version of RPCS3, you can drag the extracted game folder (containing PS3_DISC.SFB) directly into the RPCS3 game list. 2. Installing DLC and License Files
To play additional content like the Chapters of Deceit DLC, you must install both the .pkg (content) and .rap (license) files.
Drag and Drop: Open RPCS3 and drag both the .pkg and .rap files simultaneously into the main game window.
Manual Install: Alternatively, go to File > Install Packages/Raps/Edats and select your DLC files.
License Sensitivity: Ensure the .rap file extension is in lowercase (e.g., file.rap). If it is uppercase (.RAP), the emulator or a modded console may fail to recognize the license. 3. Accessing DLC In-Game
The DLC content for Army of Two: The 40th Day does not always appear immediately on the main menu.
Unlock Requirement: You typically need to finish the main campaign at least once to access DLC chapters directly.
Navigation: Go to Main Menu > Campaign > Solo/Split-screen > Select Chapter. The DLC chapters (e.g., Chapter 8 - "No Weapons") should appear there.
Story Placement: Chronologically, the Chapters of Deceit take place between chapters 4 and 7 of the main story. 4. Troubleshooting Performance
Shader Compilation: If you experience stuttering, ensure "Show shader compilation hint" is managed in settings to avoid distracting on-screen pop-ups during gameplay.
Region Locking: Ensure your DLC region matches your base game region (e.g., both must be BLUS or BLES), as mismatched regions will cause the DLC to remain inactive.
If you'd like, I can help you fine-tune the RPCS3 settings for better FPS or explain how to set up online/split-screen play for this specific title. ⚠️ Note: The first launch will compile PPU/SPU modules
The Army of Two - RPCS3 DLC- -Gnarly Repacks- provides PC gamers with a complete, pre-configured package to enjoy Electronic Arts' classic co-op shooter on modern systems. By combining the power of the RPCS3 PlayStation 3 Emulator with the DLC expansions and the installation efficiency of Gnarly Repacks, this bundle offers a highly accessible way to experience the high-octane tactical gameplay. 🔍 What is the Gnarly Repack for Army of Two?
Gnarly Repacks specializes in packaging console-exclusive titles alongside their emulators. Instead of manually searching for PS3 ISOs, decrypting game files, sourcing DLC PKG files, and matching them with a specific emulator build, the installer automates the entire setup.
Complete Bundle: Contains the base game, official updates, and all released DLC expansions.
Integrated Emulator: Includes a compatible, pre-configured build of the RPCS3 Emulator.
One-Click Installation: Extracts all parts from split compressed files and places the game directly into your system. 🎮 The RPCS3 Experience: Key Features & Enhancements
Playing Army of Two via emulation on PC offers significant visual and performance advantages over the original 2008 console hardware. 1. High-Resolution & Frame Rate Upgrades
While the original PlayStation 3 version ran at a native 720p resolution with a capped 30 frames per second, the RPCS3 Emulator lets you scale the visual output. You can render the game in 1080p, 1440p, or 4K resolution, dramatically sharpening textures, gun models, and environmental detail. 2. Built-In DLC Content
The Gnarly Repack comes pre-loaded with the game's DLC expansions. This gives players immediate access to extra maps, distinct weapons, and special skins without requiring the now-defunct PlayStation Network infrastructure. 3. Local Co-Op Continuity
Army of Two was fundamentally designed around its two-player mechanics. The integrated emulator supports local split-screen mode, allowing two players to connect gamepads directly to the PC to execute tactical strategies, draw "Aggro", and utilize step-up mechanics just like on a physical console. 📋 System Requirements for RPCS3 Emulation
Emulating high-end 7th-generation consoles like the PS3 requires substantial processing power. To maintain a smooth experience, the following specifications are highly recommended: Hardware Component Minimum Requirement Recommended Specification Operating System Windows 10/11 (64-bit) Windows 10/11 (64-bit) Processor (CPU) Intel i5 4th Gen or AMD Ryzen 1000 Series Intel Core i7 8th Gen / AMD Ryzen 3000 Series or higher Graphics Card (GPU) AMD RX 570 / Nvidia GTX 970 (Vulkan support) AMD RX 6000 Series / Nvidia RTX 2060 or higher System Memory (RAM) 16 GB RAM or higher Storage Space ~15 GB Available Space SSD Storage for faster shader compilation 🛠️ Step-by-Step Installation Guide
To install and run the Army of Two repack smoothly on your PC, follow these sequential steps:
Extract Compressed Files: Download the repack parts and extract them using 7-Zip or WinRAR. Make sure all part files are in the same folder.
Execute Installer: Run the provided .exe setup file. Follow the prompts to select your destination directory.
Say Yes to Overwrite: If the installer prompts you to replace files during extraction, select "Yes to All" to ensure all emulator components are correctly established.
Boot RPCS3: Once installation is complete, launch the rpcs3.exe executable from the installation directory.
Configure Game Controllers: Go to the "Pads" menu in RPCS3, map your connected controllers to Player 1 and Player 2, and save the settings.
Launch & Compile Shaders: Click "Boot Game" or double-click Army of Two from your emulator list. The first launch will take several minutes to compile PPU/SPU shaders, but subsequent launches will load quickly.
Army of Two RPCS3 DLC: A Repacked Version by Gnarly Repacks
The popular cooperative third-person shooter game "Army of Two" has been making waves on the RPCS3 (PlayStation 3 emulator) scene, and now, a repacked version of the game with DLC (Downloadable Content) has been released by Gnarly Repacks.
What to Expect
This repacked version of Army of Two includes:
The repack is optimized for RPCS3, ensuring a smooth gaming experience for players.
About Gnarly Repacks
Gnarly Repacks is a well-known entity in the gaming community, particularly among RPCS3 users. They specialize in repacking games to make them compatible with the emulator, often including additional content and fixes.
Key Features
Here are some key features of this repacked version:
Army of Two: A Brief Overview
For those unfamiliar with the game, Army of Two is a cooperative third-person shooter developed by EA Montreal and published by Electronic Arts (EA). The game was initially released in 2009 for the PlayStation 3 and Xbox 360 consoles. It focuses on co-op gameplay, allowing two players to work together to complete objectives.
Conclusion
The Army of Two RPCS3 DLC repack by Gnarly Repacks offers an exciting experience for fans of the game and RPCS3 users. With its optimized performance, included DLC content, and ease of installation, this repacked version is a great way to enjoy the game on the emulator.
To get the Army of Two DLC (specifically the "Chapters of Deceit" for The 40th Day) working on the RPCS3 emulator, you typically need to install both the package file and its corresponding license. Installation Steps for RPCS3
If you are using a repack like those from Gnarly Repacks, the DLC files are usually provided as .pkg (the content) and .rap (the license) files. Install the DLC Package:
Open RPCS3 and navigate to File > Install Packages/Raps/Edats. Select the DLC .pkg file from your download folder. Activate the License: Drag and drop the .rap file directly into the RPCS3 window.
Alternatively, place the .rap file into your RPCS3 directory under dev_hdd0/home/00000001/exdata/.
Note: Ensure the .rap file extension is lowercase (.rap), as the emulator can be case-sensitive.
Update the Game: DLC often requires the base game to be updated to a specific version (e.g., v1.01 or higher) to be recognized. You can check for updates by right-clicking the game in RPCS3 and selecting Check for Updates or using tools like Rusty-PSN. Accessing the DLC In-Game
For Army of Two: The 40th Day, the "Chapters of Deceit" DLC (Chapters 8 and 9) is typically accessed through the campaign menu after meeting certain criteria:
Completion Requirement: You may need to finish the main story at least once. For nearly two decades, the Army of Two
Menu Path: Go to Main Menu > Campaign > Solo/Split-screen > Select Chapter. Look for Chapter 08 - "No Weapons". Troubleshooting Common Issues
Looking for Army of Two The 40th Day DLC "Chapters of Deceit"
The Army of Two series—specifically Army of Two: The 40th Day
—has gained a second life on PC through the RPCS3 PlayStation 3 emulator, with "Gnarly Repacks" providing a pre-configured installation method for many users. Emulation on RPCS3
While the series never received a native PC release, RPCS3 allows players to run these titles in high definition, often up to 4K resolution.
Performance: The game is generally considered playable but is highly CPU-intensive, often pushing processors to 100% usage.
Stability: Users have reported occasional crashes and consistent 30 FPS performance on mid-range hardware, though newer CPUs can achieve smoother results.
Steam Deck: The titles are playable on the Steam Deck with tinkering, though the pre-installed ".exe" format from some repacks can be difficult for SteamOS to recognize without specific Wine/Proton setups. Gnarly Repacks and DLC Gnarly Repacks
" are specialized versions of the game intended to simplify the setup process for PC users.
Installer Format: Unlike standard ROMs (Jailbreak or ISO format), these repacks often use a Windows .exe installer. This installer typically extracts the game files and a specific version of RPCS3 into a single directory, allowing the game to be run like a standard PC application. DLC Content : A common point of interest is the Chapters of Deceit DLC
for The 40th Day. While base games are widely available, this DLC can be harder to locate and usually requires manual installation via .pkg and .rap files within the RPCS3 interface. Key Game Features
The Army of Two games are built around specialized cooperative mechanics:
Aggro System: One player draws enemy fire (Aggro) while the other maneuvers for a flank.
Customization: The games feature extensive weapon modification, including the "pimped" gold-plating option and interchangeable parts.
Morality Moments: Critical decisions in the story can unlock specific weapon lockers and upgrades.
Army of Two: The 40th Day - RPCS3 DLC - Gnarly Repacks
Hey there, gamers! Are you ready to dive into a thrilling co-op experience on your PC? Look no further! Today, we're excited to share with you a comprehensive guide on how to play Army of Two: The 40th Day with RPCS3, along with some awesome DLCs, all thanks to Gnarly Repacks.
What is Army of Two: The 40th Day?
Army of Two: The 40th Day is a third-person shooter developed by EA Montreal and published by Electronic Arts (EA). Released in 2010, the game is the sequel to Army of Two. It features a strong focus on cooperative gameplay, allowing two players to team up and tackle missions together.
RPCS3: The PlayStation 3 Emulator
RPCS3 is a free and open-source PlayStation 3 emulator for PC. It allows you to play PS3 games on your computer, including Army of Two: The 40th Day. With RPCS3, you can enjoy your favorite PS3 games in high definition, with improved performance and graphics.
Gnarly Repacks: Your One-Stop Shop for Game Packs
Gnarly Repacks is a popular platform for gamers to download and play repacked games, including DLCs (Downloadable Content). For Army of Two: The 40th Day, Gnarly Repacks offers a comprehensive package that includes:
DLCs for Army of Two: The 40th Day
The following DLCs are available for Army of Two: The 40th Day:
These DLCs enhance your gameplay experience, offering more challenges, missions, and multiplayer fun.
How to Play Army of Two: The 40th Day with RPCS3 and Gnarly Repacks
Here's a step-by-step guide to get you started:
Conclusion
Get ready to experience Army of Two: The 40th Day like never before! With RPCS3 and Gnarly Repacks, you can enjoy this action-packed co-op game on your PC, along with exciting DLCs. Join a friend, grab your guns, and take on the world!
Links:
Happy Gaming!
Without the Gnarly Repack structure, RPCS3 users would have to manually hunt for .pkg and .rap files for these DLC items. This repack does the heavy lifting by placing the USRDIR and DLC folders in the correct directory structure automatically.
✅ Extracted & Tested on RPCS3 0.0.28+ – No firmware headaches, no missing RAP files.
✅ All DLC Merged – No manual installation. Load the game, find the new weapons/missions waiting in the armory.
✅ Repack Size: 8.7GB (Original: ~14GB) – Lossless compression, fast install.
✅ Split Co-Op Ready – Use RPCS3’s RPCN or local netplay. Both players need the same repack version.
✅ 100% Offline Functionality – No PSN required. The DLC missions and weapons work in split-screen and system link.
To run the Army of Two Gnarly Repack smoothly, you need to configure RPCS3 correctly. The game uses the Unreal Engine 3, which has specific quirks on the emulator.
Recommended Specifications:
Critical Settings: