by Amlogic Usb Driver Windows 10 64 Bit -
Installing the Amlogic USB driver on Windows 10 64-bit is not as plug-and-play as standard hardware, but it is entirely manageable with the right preparation. The single biggest obstacle is always Microsoft’s driver signature enforcement. Once you temporarily disable that, the rest is a matter of using the correct USB port and a functional data cable.
With the driver correctly installed, you unlock the full power of your Amlogic device: recovering bricked boxes, upgrading from Android 9 to 11, or installing custom distributions like CoreELEC or Armbian.
If you continue to experience issues, consult the dedicated Amlogic subforums on XDA Developers or FreakTab. Always download driver tools from trusted repositories, and never use a random executable labeled “Driver Installer” from a file-sharing site. Happy flashing.
Last updated: October 2025. Tested on Windows 10 22H2 and Windows 11 23H2 64-bit.
The air in the workshop was thick with the scent of solder and old coffee. Elias adjusted his glasses, his eyes stinging from hours of staring at the flickering monitor. On the desk lay the "Black Box"—a generic Android TV box powered by an Amlogic S905X3 chipset that had stubbornly refused to boot since a failed firmware flash the night before. "Come on, talk to me," Elias muttered.
He had the Amlogic Burn Card Maker ready, and the new image file was loaded. All he needed was a handshake between the device and his PC. He plugged the male-to-male USB cable into the box's OTG port while holding down the reset button with a toothpick.
Nothing. Windows 10 remained silent. No "device connected" chime. No sign of life in the Device Manager.
He knew the culprit: the driver. Windows 10 64-bit was notoriously picky about unsigned drivers. He dove back into the digital trenches, scouring forums where users spoke in hex codes and cryptic links. He finally found it—a zip file buried in a thread from 2022 titled Amlogic_USB_Driver_v1.6.30.
He downloaded the archive and extracted the contents. Inside was the WorldCup_Device driver. He right-clicked the .inf file and hit Install, but Windows blocked it with a cold, grey notification: The third-party INF does not contain digital signature information.
Elias smirked. He wasn't giving up that easily. He rebooted his PC into Disable Driver Signature Enforcement mode. The screen glowed an eerie blue as he navigated the advanced startup menus.
Once back at his desktop, he tried again. This time, a warning appeared—red and urgent—asking if he wanted to install the unverified driver anyway. He clicked Yes.
The progress bar crawled across the screen. Installation Successful.
With bated breath, Elias grabbed the USB cable again. Toothpick in the reset hole, cable into the port. Ding-ding.
The Device Manager refreshed, and there it was, nestled under "Libusb-win32 devices": WorldCup Device.
On his second monitor, the Amlogic Customization Tool turned a bright, hopeful green. The "Connect Success" message felt like a victory lap. He hit Start, and the progress bar began its slow march from 0% to 100%. The Black Box was breathing again.
For developers and Android enthusiasts, the Amlogic USB Driver is the vital bridge between a Windows 10 64-bit PC and Amlogic-based hardware, such as Android TV boxes or development boards like the Odroid C2. Without this driver, your computer cannot recognize these devices in "Burning Mode," which is required for flashing new firmware, recovering "bricked" devices, or upgrading system software. Why You Need the Amlogic USB Driver
The driver identifies your device as a "World Cup Device" in the Windows Device Manager. It is primarily used with the Amlogic USB Burning Tool, a utility that allows you to:
Flash Official Firmware: Restore your TV box to its factory state.
Recover Bricked Devices: Fix software errors that prevent the device from booting.
Install Custom ROMs: Load community-built versions of Android. How to Install Amlogic USB Drivers on Windows 10 (64-Bit)
Windows 10 64-bit often requires specific steps due to Driver Signature Enforcement. There are three main ways to install it: Method 1: Automatic Installation (via USB Burning Tool)
The easiest way is to download the Amlogic USB Burning Tool. Download and Extract: Unpack the .zip or .rar archive.
Run the Installer: Right-click USB_Burning_Tool.exe and select Run as Administrator.
Driver Prompt: During installation, a prompt will appear asking to install "World Cup" drivers. Click Next or Install to proceed.
Finish: Once complete, reboot your computer to ensure the driver is active. Method 2: Manual Installation (via .INF File)
If the automatic installer fails, you can install the driver manually using the files in the tool's installation folder.
Go to the installation directory (usually C:\Program Files (x86)\Amlogic\USB_Burning_Tool\driver). Locate the file named WorldCup_Device.inf. Right-click the file and select Install. Confirm the security warning to complete the setup. Method 3: Legacy Driver Update (Device Manager)
If your device shows up as "Unknown Device" or "World Cup Device" with a yellow warning: Amlogic USB Burning Tool Recovery Guide: Revised Tutorial
Installing the Amlogic USB Driver on Windows 10 (64-bit) is essential for flashing firmware or unbricking Android TV boxes. These drivers are typically bundled with the Amlogic USB Burning Tool , which automates most of the installation process. Installation Procedure Amlogic USB Burning Tool - 4PDA
Installing Amlogic USB Driver on Windows 10 64-bit: A Step-by-Step Guide
Are you looking for a reliable and efficient way to connect your Amlogic-based device to your Windows 10 64-bit computer? If so, you're in the right place. In this article, we'll walk you through the process of installing the Amlogic USB driver on Windows 10 64-bit, ensuring a stable and successful connection.
What is Amlogic USB Driver?
Amlogic is a popular System-on-Chip (SoC) manufacturer, and their devices are widely used in various applications, including Android TV boxes, set-top boxes, and other embedded systems. The Amlogic USB driver is a software component that enables communication between your Amlogic-based device and your Windows computer.
Why Do I Need to Install Amlogic USB Driver?
When you connect your Amlogic device to your Windows 10 64-bit computer using a USB cable, Windows may not recognize the device properly. This is because the operating system lacks the necessary drivers to communicate with the device. By installing the Amlogic USB driver, you'll enable Windows to detect and interact with your device, allowing you to perform tasks such as:
Downloading and Installing Amlogic USB Driver on Windows 10 64-bit
To install the Amlogic USB driver on your Windows 10 64-bit computer, follow these steps:
Verifying the Installation
After restarting your computer, verify that the Amlogic USB driver has been successfully installed:
Conclusion
Here’s a short, informative story based on that search query.
Title: The Bootloop Fix
Lena stared at her bricked TV box. The orange light glowed, but the screen was black. The Android logo was frozen mid-spin. She’d tried to flash a new firmware, but the PC didn’t see the device. Just a silent “USB device not recognized.”
The search history read: “amlogic usb driver windows 10 64 bit.”
It was 11 PM. Her living room looked like a tech repair shop: cables everywhere, a screwdriver, tweezers, and a paperclip for the reset button. The box was an Amlogic S905X3—cheap, powerful, and now, a paperweight.
She clicked the first result—a forum post from 2019. The user “balbes150” had a link. "World-cup drivers," they called them. Not official. But nothing about Amlogic ever was.
Step one: Disable driver signature enforcement on Windows 10. She rebooted, pressed F7, and watched the command lines scroll by like incantations.
Step two: Install the driver manually. Not through the installer—that never worked. She opened Device Manager. The bricked box showed up as an “Unknown USB Device (Device Descriptor Request Failed).”
Right-click. Update driver. Browse my computer. Let me pick from a list. Have disk.
She browsed to the extracted folder: Amlogic_USB_Burning_Tool_v2.2.0/driver.
Clicked the .inf file. A warning popped up: “This driver isn’t signed.” She ignored it. Installed anyway.
The device blinked. Refreshed Device Manager. And there it was: “WorldCup Device” under Universal Serial Bus devices.
Her heart jumped. That was the magic name. Amlogic’s hidden boot mode.
She opened USB Burning Tool v2.2.0. Loaded the correct .img firmware file for her box (found after two hours of sifting through Russian forums). Clicked Start. Then, with a paperclip, she pressed the reset button inside the AV port and plugged in the USB cable.
A green progress bar appeared.
Download DDR. Initialize DDR. Download UBOOT.
1%. 4%. 17%.
At 53%, the tool beeped red. Error: [0x30405003]USB control setup error.
She almost cried. But then she remembered—older USB 2.0 port, not the blue USB 3.0. She swapped cables, restarted the process.
This time: 100%. Success.
The TV box rebooted. The logo appeared. Then the setup wizard.
She leaned back, exhaled. The Amlogic USB driver for Windows 10 64-bit wasn’t just a driver. It was a key to a locked room. And tonight, she’d picked the lock.
Installing Amlogic USB Driver on Windows 10 64-bit: A Step-by-Step Guide
Are you struggling to connect your Amlogic-powered device to your Windows 10 64-bit computer? Perhaps you're trying to flash a new firmware, transfer files, or simply charge your device, but your computer isn't recognizing it. The culprit behind this issue is likely the missing or outdated Amlogic USB driver. In this article, we'll walk you through the process of installing the Amlogic USB driver on Windows 10 64-bit, ensuring a seamless connection between your device and computer.
What is Amlogic USB Driver?
Amlogic is a popular Chinese company that specializes in designing and manufacturing system-on-chip (SoC) solutions for various devices, including Android TV boxes, smartphones, and tablets. The Amlogic USB driver is a software component that enables communication between your Amlogic-powered device and your Windows computer. This driver allows your computer to recognize your device, facilitating data transfer, firmware flashing, and other essential functions.
Why Do I Need to Install Amlogic USB Driver on Windows 10 64-bit?
When you connect your Amlogic-powered device to your Windows 10 64-bit computer, the operating system may not automatically detect it. This is because the Amlogic USB driver is not pre-installed on Windows 10, and your computer needs this driver to communicate with your device. Without the driver, you may encounter issues such as:
Downloading and Installing Amlogic USB Driver on Windows 10 64-bit
To install the Amlogic USB driver on Windows 10 64-bit, follow these steps:
Verifying Amlogic USB Driver Installation
After installing the Amlogic USB driver, verify that it's working correctly:
Troubleshooting Common Issues
If you encounter issues during or after installing the Amlogic USB driver, try these troubleshooting steps:
Conclusion
Installing the Amlogic USB driver on Windows 10 64-bit is a straightforward process that ensures a seamless connection between your Amlogic-powered device and your computer. By following the steps outlined in this article, you should be able to successfully install the driver and resolve common issues related to device recognition, data transfer, and firmware flashing. If you encounter any problems or have further questions, feel free to leave a comment below.
Frequently Asked Questions (FAQs)
Q: What is the latest version of the Amlogic USB driver? A: The latest version of the Amlogic USB driver may vary depending on your device and Windows version. Check the official Amlogic website or other reputable sources for the latest driver version.
Q: Can I use the Amlogic USB driver on Windows 7 or 8? A: The Amlogic USB driver may be compatible with Windows 7 or 8, but it's recommended to use it on Windows 10 64-bit for optimal performance.
Q: How do I uninstall the Amlogic USB driver? A: To uninstall the driver, go to Device Manager, locate your device, right-click on it, and select "Uninstall device". Then, restart your computer to complete the uninstallation process.
Q: What if I encounter issues during driver installation? A: Try troubleshooting common issues, such as device not recognized, driver installation fails, or device not charging. If problems persist, leave a comment below for further assistance.
The Amlogic USB driver for Windows 10 64-bit is a critical component for developers and enthusiasts looking to flash firmware, unbrick, or customize Android TV boxes . Most modern Amlogic devices rely on the Amlogic USB Burning Tool as the primary interface for these tasks. CoreELEC Wiki Understanding the Amlogic USB Driver
These drivers allow a Windows 10 computer to communicate with Amlogic-based hardware (like S905 or S912 chipsets) when they are in "Update" or "Loader" mode. Without them, your PC will likely label the device as an "Unknown Device" or a "World Cup Device" in the Device Manager. Instructables Primary Function: amlogic usb driver windows 10 64 bit
Manually flashing firmware images (.img files) when over-the-air (OTA) updates are unavailable. Amlogic USB Burning Tool
typically bundles these drivers within its installation package. CoreELEC Wiki Installation Guide for Windows 10 64-bit Download the Tool: Obtain the latest version of the Amlogic USB Burning Tool (v2.x or v3.x depending on your device age). Run as Administrator: Right-click the and select Run as administrator to ensure it has the permissions to modify system drivers. Automatic Driver Install:
During the software setup, a prompt will appear asking to install required device drivers. Click to proceed. Manual Installation (If needed):
If the automatic process fails, navigate to the tool's installation directory (usually C:\Amlogic\Aml_Burn_Tool\V3 InstallDriver.exe Armbian Community Forums Connecting the Device For the driver to engage, the device must be in Recovery Mode
To install the Amlogic USB driver on Windows 10 (64-bit), the most reliable method is typically via the Amlogic USB Burning Tool, which bundles the necessary drivers. Method 1: Using the USB Burning Tool Installer
The easiest way to get the 64-bit drivers is to install the official Amlogic software.
Download and Install: When you install the Amlogic USB Burning Tool, the setup usually prompts you to install the "WorldCup Device" drivers .
Manual Execution: If the tool is already installed but the device isn't recognized, navigate to the tool's installation folder (usually C:\Program Files (x86)\Amlogic\USB_Burning_Tool\Driver).
Run the 64-bit Installer: Look for a file named InstallDriver.exe or InstDrv64.exe and run it as an Administrator . Method 2: Manual Update via Device Manager
If your computer detects the device as "Unknown" or "WorldCup Device" with a yellow triangle:
Open Device Manager: Right-click the Start button and select Device Manager .
Locate Device: Find your Amlogic device (often under "Other devices" or "LibUSB-Win32 Devices").
Update Driver: Right-click it, select Update driver, and choose Browse my computer for drivers .
Point to Folder: Direct Windows to the Driver folder within your Amlogic USB Burning Tool installation directory . Troubleshooting Tips
Driver Signature Enforcement: Windows 10 64-bit sometimes blocks unsigned Amlogic drivers. If installation fails, you may need to restart Windows with Driver Signature Enforcement disabled via the Advanced Startup menu.
Connection: Always use a USB 2.0 port if possible, as USB 3.0/3.1 ports can occasionally cause detection issues with Amlogic burning mode.
Are you having trouble getting a specific TV Box or Single Board Computer into "Burning Mode"?
Amlogic USB driver for Windows 10 (64-bit) is a critical component that enables your computer to communicate with devices powered by Amlogic chipsets, such as Android TV boxes and tablets. Its most helpful feature is facilitating the "Burning" or flashing process through the Amlogic USB Burning Tool
, which is used to manually update or restore firmware when standard over-the-air (OTA) updates are unavailable. CoreELEC Wiki Key Features and Capabilities Firmware Recovery & Repair
: It allows you to repair a corrupted bootloader or replace damaged firmware that prevents the device from starting normally. Support for Large Image Files
: The associated tool supports burning image files larger than 1GB, making it suitable for modern, feature-rich Android firmware. Device Recognition (WorldCup Device)
: Once installed, the driver allows Windows to recognize the connected device in special modes (often appearing as "WorldCup Device" or "android_winusb" in Device Manager), which is necessary for the PC to send data to the device's internal storage. Direct eMMC Burning
: It supports burning directly to a "blank board" (empty board), which is essential during production or for advanced hardware recovery. Installation Highlights for Windows 10 64-bit Automatic Installation : In many versions of the Amlogic USB Burning Tool
, drivers are installed automatically during the software setup process. Manual Override
: If the device shows a yellow exclamation mark in Device Manager, you can manually point Windows to the
sub-directory within the tool's installation folder (typically C:\Amlogic\Aml_Burn_Tool\V3\Driver ) to complete the setup. Antivirus Compatibility : It is highly recommended to disable antivirus software
during installation to prevent critical library files from being mistakenly blocked. MINIX Forum Usage Tips Required Hardware : You typically need a USB male-to-male cable
to connect your Amlogic device to the computer for flashing. Port Selection : It is often advised to use USB 2.0 ports
instead of USB 3.0 to avoid connection stability issues during the burning process. MINIX Forum , or do you need help troubleshooting a device that isn't being recognized?
Amlogic Burning Tool Guide (0.4) | PDF | Device Driver | Usb - Scribd 2 Nov 2020 —
Introduction
Amlogic is a popular System-on-Chip (SoC) manufacturer that produces a wide range of processors for Android-based devices, smart TVs, and other embedded systems. The Amlogic USB driver is a software component that enables communication between Amlogic-based devices and Windows 10 operating systems. In this report, we will focus on the Amlogic USB driver for Windows 10 64-bit.
Driver Overview
The Amlogic USB driver is a kernel-mode driver that allows Windows 10 to recognize and interact with Amlogic-based devices connected via USB. The driver supports various Amlogic SoCs, including S905, S905X, S905L, and others. The driver's primary function is to provide a communication interface between the device and the Windows 10 operating system, enabling data transfer, device enumeration, and control.
Driver Features
The Amlogic USB driver for Windows 10 64-bit supports the following features:
Driver Installation
To install the Amlogic USB driver on Windows 10 64-bit, follow these steps:
Driver Files
The Amlogic USB driver for Windows 10 64-bit consists of the following files:
Driver Version and Date
The version and date of the Amlogic USB driver for Windows 10 64-bit may vary depending on the specific driver package. However, here is an example of a recent driver version:
Known Issues and Limitations
Some known issues and limitations of the Amlogic USB driver for Windows 10 64-bit include:
Conclusion
The Amlogic USB driver for Windows 10 64-bit is a critical software component that enables communication between Amlogic-based devices and Windows 10 operating systems. While the driver provides essential functionality for device enumeration, data transfer, and control, it may have some limitations and known issues. Users should ensure they download and install the latest driver version from a reliable source to ensure compatibility and reliability.
Recommendations
Based on this report, we recommend:
By following these recommendations, users can ensure a stable and reliable experience with their Amlogic-based devices on Windows 10 64-bit.
Installing the Amlogic USB driver on Windows 10 (64-bit) is a critical step for anyone looking to unbrick, upgrade, or flash custom firmware onto Android TV boxes using the Amlogic SoC. Without this driver, your PC will not communicate with your device in "Burning Mode." 1. Download the Necessary Tools
The Amlogic USB driver is rarely a standalone download; it is typically bundled with the Amlogic USB Burning Tool.
Amlogic USB Burning Tool (v3.2.0 or v2.1.7.0): These versions are widely used and include the necessary driver installers in their installation directories.
Driver Files: Once you extract or install the tool, the drivers are often located in a subfolder named Driver within the installation path (e.g., C:\Amlogic\Aml_Burn_Tool\Driver). 2. Automatic Installation Method
The easiest way to install the drivers is during the setup of the USB Burning Tool itself.
Run the USB_Burning_Tool.exe (or setup file) as an Administrator.
Follow the prompts. Towards the end of the installation, a separate window will pop up specifically for Device Driver Installation.
Click Next and then Finish to allow Windows to register the Amlogic drivers. 3. Manual Installation (For Windows 10 64-bit)
If the tool doesn't recognize your device, you may need to force the driver installation manually via the Device Manager. Amlogic USB Burning Tool - 4PDA
To install the Amlogic USB driver on Windows 10 64-bit, you generally need to install the Amlogic USB Burning Tool, which bundles the necessary drivers for flashing firmware to Amlogic-based devices like Android TV boxes. Method 1: Automatic Installation (Recommended)
The easiest way to get the correct 64-bit drivers is to run the official tool installer, which handles driver registration automatically.
Download and Extract: Obtain the Amlogic USB Burning Tool (common versions include v2.x or v3.x) and extract the contents to a folder.
Run Setup: Execute the USB_Burning_Tool.exe or setup.exe as an Administrator.
Install Drivers: During the installation process, a prompt will appear asking to install required Device Drivers. Select Next and allow the installer to complete the driver setup.
Verify: Once finished, the drivers for 64-bit architecture should be active. Method 2: Manual Installation (64-bit Specific)
If the automatic installer fails or you only have the driver files, you can install them manually via Device Manager. Update drivers through Device Manager in Windows
To install Amlogic USB drivers on Windows 10 (64-bit), the most reliable method is to install the Amlogic USB Burning Tool , which includes the necessary drivers in its installation package. Step 1: Download the Amlogic USB Burning Tool
While there is no single official consumer website, reputable community sources like the MINIX Forum CoreELEC Wiki provide verified versions of the tool. Version 2.x
: Generally more stable for older Amlogic chips (S905, S912). Version 3.x
: Required for newer Android 11+ devices or chips like the S928X. Step 2: Installation Process Extract the Files : Right-click the downloaded zip file and select "Extract Here" Run the Installer : Double-click the USB_Burning_Tool.exe Install Drivers
: During the setup, a prompt will appear asking to install required device drivers (often labeled "World Cup Device"). Select to permit this. : Once completed, click . The drivers are now registered on your system. Step 3: Verifying the Connection To check if the drivers are working: Amlogic USB Burning Tool Recovery Guide: Revised Tutorial
This is where many users fail. You must connect the device correctly:
Before you give up, verify these five points:
Cause: You are using the wrong USB port or your device is stuck in bootloop.
Fix:
Even with the correct driver, issues arise. Here are the top fixes:
Q: Do I need to uninstall old Amlogic drivers first?
A: Yes. If you have previously installed older drivers (V1.x), they conflict. Run USB_Burning_Tool\driver\uninstall_driver.exe as admin first.
Q: Can I use this driver on a virtual machine (VMware/VirtualBox)? A: Yes, but USB passthrough is unreliable. You must install the driver on the host OS, then assign the USB device to the VM. Expect lower success rates.
Q: My PC doesn’t have a USB-A port (only USB-C). A: Use a USB-C to USB-A adapter or hub. Ensure the adapter supports data transfer (many cheap adapters are power-only).
Q: The driver installs, but my device keeps disconnecting/reconnecting. A: That is a power issue. Use a powered USB hub between your PC and the Amlogic device.
Do not run the USB Burning Tool yet. First, install the driver:
Cause: Windows 10 64-bit requires SHA-256 signed drivers. Older Amlogic drivers (pre-2018) use SHA-1.
Fix: