Adjustment Program Epson Sx115 39 Verified 【PROVEN】

Correct program name:
Epson Stylus SX115 Adjustment Program (also works for SX100/SX105/T13/T19 series – same base mechanism)

Where to obtain a verified copy safely:

Using it yourself is a grey area. It violates Epson’s warranty but is not illegal for personal repair (per the Right to Repair movement in many countries). Selling the program is a copyright violation. adjustment program epson sx115 39 verified

Title: Epson SX115 Adjustment Program – Address 39 Verified Reset
Description: This verified procedure resets the waste ink counter on an Epson Stylus SX115 via the service adjustment program. Use address offset 39 (hex) in the EEPROM editor section of the tool. After reading the counter value, initialize the counter at address 39, then verify that the value returns to 0x0000. This method has been tested on firmware versions up to 2.13. Ensure the printer is in service mode before starting. Correct program name: Epson Stylus SX115 Adjustment Program

The Epson SX115, like most consumer inkjet printers, has a non-removable waste ink pad. After a set number of prints/cleanings, a counter fills up. The printer then locks completely, flashing a "Service Required" error (often 5 flashes on the ink lights). The Adjustment Program v.39 is the proprietary Epson service tool that resets this counter, bypassing the need to replace the mainboard or send the printer for service. Alternative safe option: